Corvette Performance Products

08/25/2024

Day 2 at Carlisle, Monica was busy passing out our brochures to over 200 Corvettes. One Corvette in particular could only see out of one eye. Perfect candidate for our headlight system.

07/19/2024

Made In the USA

This is a 100% functional lower C6 rear diffuser. A must for track days or that ultimate racing look. Bolts on in about 1 hour. Weight is 10.5 with the drop down fences.
It does replace the factory panel. It is a easy bolt on. Locking tabs on top screws into the factory side mounting holes. and has a brace and bracket that attaches to the lower control arm bolt.
LED Back up lights are available for this diffuser. These are mounted in the tunnel area and gives everyone fair warning when backing up.

SOLD SEPERATELY - SEE LED BACK UP LIGHTS.

Our diffuser also function as designed. If you have all the other necessary elements in place. IE, A proper floor feeder system, droop limits on the rear suspension, ability to adjust total center of pressure, (splitter and rear wing) you will be further able to exploit our new product.
To calculate approximate down force at other speeds at the diffuser we know that lift increases at the square of the velocity. At 75mph we would have 100lbs down force.

With this installation for the street on a stock C6, you will improve your gas mileage at highway speeds because the diffuser allows the air traveling underneath the car a place to expand and decelerate back to road speed as well as providing wake infill. IE: It will reduce total drag.

Our diffuser comes in a gelcoat finish which needs to be prepped and painted.

CES Custom 2 Tip Exhaust available For BPP Diffuser

https://bprowholesale.com/product/corvette-c6-2-tip-custom-diffuser/

07/16/2024

https://bprowholesale.com/wholesale-catalog/

Corvette, Camaro & Firebird Catalog 2023 B Pro Wholesale Catalog 2023 In the racing business for over 35 years Breathless Pro Racing Team is a family owned business. We operate out of our shop located in Davie, FL. We have raced in several series including NASA, SCCA, GrandAm, Pirelli World Challeng...

07/16/2024

Click below for all our hot products for your Corvette plus more!!

one stop shop for performance and racing products PROUDLY MADE IN U.S.A. All track tested and approved for best performance Fast Delivery 5-8 days High Performance Track tested Years Of Experience 30+ years Choose your ride Corvette Camaro Firebird Hummer H2 Smartcar Harley V-Rod 2021-2022 Tesla Mod...

07/16/2024

Corvette C4 Vortex Ram Induction 90-96

U.S. Made | 5-7 day priority shipping

Guaranteed to fit your C4 (90-96) Corvette
Enjoy a 15-20 HP increase
Noticeable acceleration and gas mileage improvements
Enhanced filtration with low turbulence
Track proven performance
Perfect snug fit
Aggressive racing design
Easy 2hr installation

More Go…less Show… A performance-focused Ram Induction Cold Air Intake

When designing this cold air intake we had one primary goal in mind: “how do we provide superior airflow that results in noticeable performance increases that our power-hungry corvette enthusiasts can have a blast in?” See, we didn’t just want an intake that looked good inside the engine bay but didn’t deliver on performance like most of the other intakes on the market—No—we wanted some real “adrenaline rush” producing results! This ambitious goal created a real challenge for us, to innovate and create a unique/elite product. So after months of grueling brainstorming, testing, and detailed engineering…

The Vortex Ram Induction Air Intake Was Born!
Adds up to 15 horsepower to your C4 Corvette!

It’s no wonder that more and more C4 owners are choosing this intake as their first upgrade. This is an easy to install (2 to 3 hrs) and relatively inexpensive modification that adds real immediate power. This is due to the unique design of the intake which allows a hefty flow of cool oxygen-rich air to make its way into the engine. You can especially feel a violent pull in the middle to upper RPM range. Since this modification works with outside captured air—once you get on the road with this mod installed the difference in performance will shock you.
A track-proven intake

We’re so confident in the effectiveness of our intakes that we use them in race cars! The car in the picture is a C6 Corvette that competes in the Pirelli TransAm series. This cold air intake compliments other aftermarket mods perfectly! Unlike the restrictive stock air box assembly, this one obtains cool, pressurized air from the radiator cavity through your modified should. The specially designed scoop then forces it into the rammer sealed box, where in turn, it directly injects cold air into your intake. The smooth airflow allows for the most optimal functioning of all your parts.

Sleek fresh look

Not overly large and obtrusive, this intake fits snug inside the engine bay—allowing enough space for other mods while still adding an aesthetically pleasing view. Guaranteed to fit!
Superior filtration

Look closely at the filter and you can see that it’s not the K&N filter that everyone sells. This revolutionary air cleaner contains an internal vortex velocity stack that reduces turbulence in the intake for far better performance. Once installed, it’s a straight shot from the air bridge to the throttle body—no bends, change of direction, or an accordion for the air to bump around.
Easily install in 1 to 2 hours

Yes, this is a mod you can install on a Sunday afternoon. Even if you’ve never performed a modification before, the included instructions are clear enough that you can start and finish this mod within 2 hours. All the necessary parts are included.
Features

Increases throttle response
Slight increase in gas mileage
Increases acceleration (pedal sensitivity)
Made out of durable materials
U.S. made
Unique sleek design
Enhanced sound
Reusable—washable filter

https://bprowholesale.com/product/corvette-c4-vortex-ram-induction-system-90-96/

07/16/2024

Corvette C4 Vortex Ram Air Intake 1985-1989

More Go…less Show… A performance-focused Ram Induction Cold Air Intake

When designing this cold air intake we had one primary goal in mind: “how do we provide superior airflow that results in noticeable performance increases that our power-hungry corvette enthusiasts can have a blast in?” See, we didn’t just want an intake that looked good inside the engine bay but didn’t deliver on performance like most of the other intakes on the market—No—we wanted some real “adrenaline rush” producing results! This ambitious goal created a real challenge for us, to innovate and create a unique/elite product. So after months of grueling brainstorming, testing, and detailed engineering…

The Vortex Ram Induction Air Intake Was Born!
Adds up to 15 horsepower to your C4 Corvette!

It’s no wonder that more and more C4 owners are choosing this intake as their first upgrade. This is an easy to install (2 to 3 hrs) and relatively inexpensive modification that adds real immediate power. This is due to the unique design of the intake which allows a hefty flow of cool oxygen-rich air to make its way into the engine. You can especially feel a violent pull in the middle to upper RPM range. Since this modification works with outside captured air—once you get on the road with this mod installed the difference in performance will shock you.
A track-proven intake

We’re so confident in the effectiveness of our intakes that we use them in race cars! The car in the picture is a C6 Corvette that competes in the Pirelli TransAm series. This cold air intake compliments other aftermarket mods perfectly! Unlike the restrictive stock air box assembly, this one obtains cool, pressurized air from the radiator cavity through your modified shroud. The specially designed scoop then forces it into the rammer sealed box, where in turn, it directly injects cold air into your intake. The smooth airflow allows for the most optimal functioning of all your parts.

Sleek fresh look

Not overly large and obtrusive, this intake fits snug inside the engine bay—allowing enough space for other mods while still adding an aesthetically pleasing view. Guaranteed to fit!
Superior filtration

Look closely at the filter and you can see that it’s not the K&N filter that everyone sells. This revolutionary air cleaner contains an internal vortex velocity stack that reduces turbulence in the intake for far better performance. Once installed, it’s a straight shot from the air bridge to the throttle body—no bends, change of direction, or an accordion for the air to bump around.
Easily install in 1 to 2 hours

Yes, this is a mod you can install on a Sunday. Even if you’ve never performed a modification before, the included instructions are clear enough that you can start and finish this mod within 2 hours. All the necessary parts are included.
Features

Increases throttle response
Slight increase in gas mileage
Increases acceleration (pedal sensitivity)
Made out of durable materials
U.S. made
Unique sleek design
Enhanced sound
Reusable—washable filter

https://bprowholesale.com/product/corvette-c4-vortex-ram-induction-system-1985-1989/

07/16/2024

C5 Corvette Vortex Ram Induction System

Click the link below for the review from Grassroots Motorsports.
https://grassrootsmotorsports.com/project-cars/2004-Chevrolet-corvette-z06/project-z06-breathe-freely-breathless/
More Go…less Show… A performance-focused Ram Induction Cold Air Intake

When designing this cold air intake we had one primary goal in mind: “how do we provide superior airflow that results in noticeable performance increases that our power-hungry corvette enthusiasts can have a blast in?” See, we didn’t just want an intake that looked good inside the engine bay but didn’t deliver on performance like most of the other intakes on the market—No—we wanted some real “adrenaline rush” producing results! This ambitious goal created a real challenge for us, to innovate and create a unique/elite product. So after months of grueling brainstorming, testing, and detailed engineering…

The Vortex Ram Induction Air Intake Was Born!
Adds up to 20 horsepower to your C5 Corvette!

It’s no wonder that more and more C5 owners are choosing this intake as their first upgrade. This is an easy to install (2 to 3 hrs) and relatively inexpensive modification that adds real immediate power. This is due to the unique design of the intake which allows a hefty flow of cool oxygen-rich air to make its way into the engine. You can especially feel a violent pull in the middle to upper RPM range. Since this modification works with outside captured air—once you get on the road with this mod installed the difference in performance will shock you.
A track-proven intake

We’re so confident in the effectiveness of this intake that we use it in race cars! The car in the picture is a C6 Corvette that competes in the Pirelli TransAm series. This cold air intake compliments other aftermarket mods perfectly! Unlike the restrictive stock air box assembly, this one obtains cool, pressurized air from the radiator cavity through your modified should. The specially designed scoop then forces it into the rammer sealed box, where in turn, it directly injects cold air into your intake. The smooth airflow allows for the most optimal functioning of all your parts.

Sleek fresh look

Not overly large and obtrusive, this intake fits snug inside the engine bay—allowing enough space for other mods while still adding an aesthetically pleasing view. Guaranteed to fit!
Superior filtration

Look closely at the filter and you can see that it’s not the K&N filter that everyone sells. This revolutionary air cleaner contains an internal vortex velocity stack that reduces turbulence in the intake for far better performance. Once installed, it’s a straight shot from the air bridge to the throttle body—no bends, change of direction, or an accordion for the air to bump around.
Easily install in 1 to 2 hours

Yes, this is a mod you can install on a Sunday afternoon. Even if you’ve never performed a modification before, the included instructions are clear enough that you can start and finish this mod within 2 hours. All the necessary parts are included.
Features

Increases throttle response
Slight increase in gas mileage
Increases acceleration (pedal sensitivity)
Made out of durable materials
U.S. made
Unique sleek design
Enhanced sound
Reusable—washable filter



These air boxes are available in BLACK ONLY.

https://bprowholesale.com/product/corvette-c5-vortex-ram-induction-air-intake-01-04-black/

07/15/2024

1997-2004 Corvette Racing Style Lighting System
Racing Style Front Bumper Auxiliary Lighting System

Breathless Racing– this exclusive lighting system mounts in the center of your front bumper, with minor modifications. The kit includes two high-powered hyper-white LED bulbs. The installation package includes a custom aluminum bracket, fiberglass insert panel, clear acrylic lens cover with a complete wiring harness for simple install.

SMALL DOESN’T MEAN WEAK – Running 2 of the finest 25W LEDs, these auxiliary LED lights are compact in size but throw out a powerful forward light. The lights that spills to the sides are adequate for night riding and driving. 6000K provides a soft light that prevents harsh glares. 50W, 5,000LM/pair.

UNIQUE HYBRID REFLECTOR – Use only one reflector to create an outstanding combo beam while maintaining a unique look. 5° SPOT and 120° FLOOD beam for complete lighting coverage and superior visibility.

RUGGED AND DURABLE – IP68 rated waterproof, rustproof, shockproof, dustproof. Over 50,000+ hours lifespan. Being manufactured from extruded 6063 aluminum, the small LED lights are tough enough for all conditions. The front has an unbreakable PC lens while the bottom has the Nirider designed adjustable mount.

The estimated lifespan of the lights is 10,000-50,000 hrs.

https://bprowholesale.com/product/corvette-c5-racing-auxiliary-bumper-light-kit-97-04/

07/15/2024

C5 Corvette Headlights That Never Let You Down

They won’t pop up… they get stuck down… the motor stopped running… Those are old problems that these C5 Lemans-style racing headlights eradicate. Unlike the pop-up headlights, these are fixed: there is no motor, no gears, and therefore, nothing that can malfunction and cause delays. Only a pair of head-turning LeMans-style racing headlights that provide phenomenal illumination at short and long distances. It’s no wonder that more and more C5 owners are choosing the non-pop-up kit over the commonly malfunctioning- stock lights.
Latest LED light technology for unmatched nighttime visibility

Drive with confidence knowing that nothing on the road will surprise you due to lack of visibility. The high beams on these C5 headlights are LED performance lights, thus, they give you advantages that no other type of light does. For example, the excellent color rendering index lets you see objects’ shapes and colors in the distance. This keeps you safer by making it easier to see upcoming curves, obstructions, and signs on the side of the road. Although the light produced is powerful and white (whiter than daylight), it’s toned down enough so that it doesn’t blind oncoming traffic. You can do the test yourself; before installing these headlights, turn on the high beams on your stock headlights and measure the distance of illumination, then after installing the LEDs, do the same. The results will surprise you. LED High Beams and Super white halogen D.O.T approved low beams

Department of Traffic approved low beams.


What is scratch-resistant, extremely hard to break, durable, and lightweight?

The answer is the acrylic lens cover used on these headlights. See, we understand that the exposed parts on a Corvette must be tough. We know these beautiful cars are made for speed, and at high speeds, even the smallest of items can become projectiles that cause damage. For that reason, we used a high-grade, break-resistant, acrylic lens cover on our lights. This hardened acrylic can withstand just about any small projectile that might smash into your car while on the road.


Made to last. Last to die.

Unlike other headlights made out of cheap materials, these C5 headlights are made of quality materials that withstand the test of time. Starting with the LEDs, these lights are known to have a lifespan of 2 to 4 times as long as most other lights. The estimated lifespan is 10,000 to 50,000 hours!

These headlights’ structure is made up of 60-61 aircraft aluminum: making it resistant to corrosion, stress, and cracking—basically weatherproof.

The tubs are made of ABS, a strong but lightweight material that can be colored. Also weatherproof and fire-resistant. These headlights give the Nokia cell phone quite a challenge when it comes to durability. You can rest assured that your investment will not be short-lived.

*The Kit includes a heat and moisture reduction fan system*


Easily install on a Sunday afternoon with day-to-day tools.

Everything comes “pre-mounted.” Kit includes all components necessary for installation.

Estimated Time:

Removal – old headlights – 30-60 minutes
Installation – new headlights – 3-6 hours

*installation instructions included*

https://bprowholesale.com/product/corvette-c5-non-pop-up-headlight-kit-98-04/

07/15/2024

Racing Style Front Bumper Auxiliary Lighting System



Breathless Racing– this exclusive lighting system mounts in the center of your front bumper, with minor modifications.. The kit includes two high powered hyper white halogen bulbs. The installation package includes a custom aluminum bracket, fiberglass insert panel, clear acrylic lens cover with a complete wiring harness for simple install.

SMALL DOESN’T MEAN WEAK – Running 2 of the finest 25W LEDs, these auxiliary LED lights are compact in size but throw out a powerful forward light. The lights that spills to the sides are adequate for night riding and driving. 6000K provides a soft light that prevents harsh glares. 50W, 5,000LM/pair.

UNIQUE HYBRID REFLECTOR – Use only one reflector to create an outstanding combo beam while maintaining a unique look. 5° SPOT and 120° FLOOD beam for complete lighting coverage and superior visibility.

RUGGED AND DURABLE – IP68 rated waterproof, rustproof, shockproof, dustproof. Over 50,000+ hours lifespan. Being manufactured from extruded 6063 aluminum, the small LED lights are tough enough for all conditions. The front has an unbreakable PC lens while the bottom has the Nirider designed adjustable mount.

The estimated lifespan of the lights is 10,000-50,000 hrs.

https://bprowholesale.com/product/corvette-c4-racing-auxiliary-bumper-led-light-kit-84-90/

07/15/2024

C4 Corvette Headlights That Never Let You Down

They won’t pop up… they get stuck down… the motor stopped running… Those are old problems that these C4 Lemans-style racing headlights eradicate. Unlike the pop-up headlights, these are fixed: there is no motor, no gears, and therefore, nothing that can malfunction and cause delays. Only a pair of head-turning leMans-style racing headlights that provide phenomenal illumination at short and long distances. It’s no wonder that more and more C4 owners are choosing the non-pop-up kit over the commonly malfunctioning- stock lights.
Latest LED light technology for unmatched nighttime visibility

Drive with confidence knowing that nothing on the road will surprise you due to lack of visibility. The high beams on these C4 headlights are LED performance lights, thus, they give you advantages that no other type of light does. For example, the excellent color rendering index lets you see objects’ shapes and colors in the distance. This keeps you safer by making it easier to see upcoming curves, obstructions, and signs on the side of the road. Although the light produced is powerful and white (whiter than daylight), it’s toned down enough so that it doesn’t blind oncoming traffic. You can do the test yourself; before installing these headlights, turn on the high beams on your stock headlights and measure the distance of illumination, then after installing the LEDs, do the same. The results will surprise you. LED high beams and D.O.T approved super white halogen high beams.

Department of Traffic approved low beams.


What is scratch-resistant, extremely hard to break, durable, and lightweight?

The answer is the acrylic lens cover used on these headlights. See, we understand that the exposed parts on a Corvette must be tough. We know these beautiful cars are made for speed, and at high speeds, even the smallest of items can become projectiles that cause damage. For that reason, we used a high-grade, break-resistant, acrylic lens cover on our lights. This hardened acrylic can withstand just about any small projectile that might smash into your car while on the road.


Made to last.

Unlike other headlights made out of cheap materials, these C4 headlights are made of quality materials that withstand the test of time. Starting with the LEDs, these lights are known to have a lifespan of 2 to 4 times as long as most other lights. The estimated lifespan is 10,000 to 50,000 hours!

These headlights’ structure is made up of 60-61 aircraft aluminum: making it resistant to corrosion, stress, and cracking—basically weatherproof.

The tubs are made of ABS, a strong but lightweight material that can be colored.



Key Points:

Replacement for pop-up headlights

Latest LED light technology

Constructed of 60-61 aircraft aluminum

High-grade, break-resistant acrylic lens cover

Durable, lightweight ABS tubs

Low beam wattage 130

High beam wattage 230

https://bprowholesale.com/product/corvette-c4-lemans-style-racing-headlights-1984-1996/