Ocean Machinery

10/22/2026

10/22/2026

Day 1 - very busy day at the Ocean booth. The Slingers, Avenger PLUS and especially the Gladiator were gathering crowds all day long. Stop by booth 3848 and see for yourself, and pickup your FREE limited edition poster.

10/09/2026

𝐓𝐡𝐚𝐧𝐤 𝐘𝐨𝐮 𝐃𝐚𝐯𝐞!
Ocean Machinery would like to thank David Watson for 22 years of loyal service to the Ocean brand.

After a fortuitous meeting with Ocean’s president, Danny Steyn, Ocean was quick to take on Southland Machinery - they were one of Ocean’s original dealers.

Over the years, Dave, and his employees, sold Ocean products in the Carolinas and Virginia with great success. Ocean wishes Dave nothing but the best in his future endeavors.

10/07/2026

A Message from Ocean President, Danny Steyn.

10/02/2026

**ONE MACHINE. 6 MINUTES. 39 SECONDS. 👀**

What if ONE machine could:

✂️ Cut
🔥 Cope
🕳️ Drill
📐 Bevel
🏷️ Part Mark
📍 Lay out welded attachments

The **Ocean GLADIATOR** just did all of this on a single structural steel beam:

⏱️ **6:39 TOTAL CYCLE TIME**

→ 1 Trim Cut
→ 5 Web Holes
→ 1 Mechanical Cutout
→ 2 Layout Marks for Welded Attachments
→ 2 Holes in EACH Fl**ge
→ 1 Cut to Length

That's a lot of processing without moving the beam from machine to machine.

**One machine. Multiple processes. Less material handling.**

See what the GLADIATOR can do for your shop:

👉 https://oceanmachinery.com/solutions/ocean-gladiator-structural-steel-beam-laser/

09/30/2026

Back in Oct 2024, almost exactly two years ago, Ocean Machinery’s president, Danny Steyn, suffered a life-threatening accident, hitting a fellow racer that had spun out at the kink, the notorious blind turn that is taken flat out in many classes. Steyn was unable to avoid him, resulting in a head on collision at 116mph... >>READ MORE

Back in Oct 2024, almost exactly two years ago, Ocean Machinery’s pres

09/16/2026

𝗬𝗢𝗨𝗥 𝗦𝗛𝗢𝗣 𝗗𝗢𝗘𝗦𝗡'𝗧 𝗡𝗘𝗘𝗗 𝗠𝗢𝗥𝗘 𝗙𝗟𝗢𝗢𝗥 𝗦𝗣𝗔𝗖𝗘.
𝗜𝗧 𝗡𝗘𝗘𝗗𝗦 𝗧𝗢 𝗨𝗦𝗘 𝗧𝗛𝗘 𝗦𝗣𝗔𝗖𝗘 𝗜𝗧 𝗛𝗔𝗦 𝗕𝗘𝗧𝗧𝗘𝗥.

A beam comes in.

Then it gets moved for cutting.
Moved again for drilling.
Moved again for coping.
And somebody has to keep moving that beam.

That's a lot of handling before the steel ever makes it to the next stage.

𝗧𝗵𝗲 𝗢𝗰𝗲𝗮𝗻 𝗚𝗟𝗔𝗗𝗜𝗔𝗧𝗢𝗥 𝗕𝗲𝗮𝗺 𝗟𝗮𝘀𝗲𝗿 𝗰𝗵𝗮𝗻𝗴𝗲𝘀 𝘁𝗵𝗮𝘁.

⚙️ 𝗢𝗡𝗘 𝗖𝗢𝗠𝗣𝗔𝗖𝗧 𝗕𝗘𝗔𝗠 𝗣𝗥𝗢𝗖𝗘𝗦𝗦𝗜𝗡𝗚 𝗦𝗢𝗟𝗨𝗧𝗜𝗢𝗡

→ Cut beams to length
→ Drill holes
→ Cope flanges & webs
→ Etch part marks
→ Process multiple structural steel profiles

Less moving steel.

Less floor space dedicated to equipment.

More processing in a compact footprint.

LEARN MORE: https://oceanmachinery.com/solutions/ocean-gladiator-structural-steel-beam-laser/

𝗛𝗼𝘄 𝗺𝘂𝗰𝗵 𝗼𝗳 𝘆𝗼𝘂𝗿 𝘀𝗵𝗼𝗽 𝗳𝗹𝗼𝗼𝗿 𝗶𝘀 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗯𝗲𝗶𝗻𝗴 𝘂𝘀𝗲𝗱 𝘁𝗼 𝗽𝗿𝗼𝗰𝗲𝘀𝘀 𝘀𝘁𝗲𝗲𝗹—𝗮𝗻𝗱 𝗵𝗼𝘄 𝗺𝘂𝗰𝗵 𝗶𝘀 𝗯𝗲𝗶𝗻𝗴 𝘂𝘀𝗲𝗱 𝘁𝗼 𝗺𝗼𝘃𝗲 𝗶𝘁?

👇 What's the biggest hold-up in your shop?

09/15/2026

A Message from Ocean President, Danny Steyn.

08/26/2026

Punch, shear, and mark clip angles and flat bar — fully automated, in one pass.

The Ocean CLIPPER II CNC Angle Line processes angle up to 6 x 6 x 5/8" and flat bar up to 6 x 5/8", with a 75-ton hydraulic punch and 100-ton shear built right in. No manual layout, no hand-punching holes — load the material and the machine does the rest.

It's also one of the most compact CNC angle lines on the market. Small footprint, standard punches and dies, simple enough that shops with fewer than five employees run their own in-house automated angle production.

Run it a few hours a week, and it pays for itself in less than a year.

👉 See the full specs at https://oceanmachinery.com/solutions/clipper-cnc-angle-line/

08/19/2026

The Ocean Stringer Slinger is designed to safely lift and rotate stair stringer assemblies, allowing efficient and productive fitting and welding on all sides of the stair assembly without the need for an overhead crane or forklift.

Lifting capacity is 2 tons, max rotation size is 96" x 12", and profile length is from 6 ft. to 18 ft.