Liberty Trailers

09/04/2026

These sponsorships just keep getting wilder Anderson Speedway

The event is tomorrow Saturday, September 5 🤘

09/02/2026

🚨 Five trailers in 60 seconds at NATDA 2026. Here's everything we drove to the show floor.

LD10K Dump (redesigned): Our number-one bestseller, rebuilt. New I-beam frame, telescopic cylinder, available in 10ft and 12ft with 18in or 36in sidewalls. Perfect for your half-ton truck.

LU5K (brand new): One dedicated build, 83" x 14' on a 5,200 lb brake axle, new toolbox, Detach and Defend™ coupler, and ramps you can load from the back or the side.

Split Tilt Gooseneck (new GN version): You asked, we built it. 16K, 22ft, with powered jacks and a powered tilt upgrade, new toolbox, toolbox in the neck, aluminum wheel package, and fork holders standard.

LF Flatbed Gooseneck: A 22K with hydraulic jack and sliding winch track options, two steps, Mammoth Ramps™ with pull-downs, dual toolbox system with an upper box that fits a winch, and a spare mount up top. Offered in 14K, 16K, 22K, and 25K.

Plus: every dump in the lineup now ships with a new low-profile cylinder.

American Made. Commercial Grade.

09/02/2026

09/02/2026

🇺🇸 Thank you for the opportunity to sponsor the national anthem that opened NATDA 2026 this year. It's such a special tradition where NATDA takes a moment to shift the focus from trailers, sales, and the hustle and bustle of Nashville to honor our vetrans, especially when so many of the good people in this industry are service members. Thank you.

American Made. Commercial Grade. Proud of it.

Thumbnail image courtesy of

08/31/2026

🚨 Live from NATDA in Nashville. Stop by to chat and have a look!

08/26/2026

Do you know what peening is? Very few trailer manufacturers do this, and it's just a small part of why Liberty Trailers is one of the fastest growing names in the industry.

Find your nearest Liberty dealer. Comment "MYDEALER" and we'll send the link to your DMs.

08/22/2026

Hard-working equipment takes a beating on any trailer that actually works for a living. Fenders meet posts. Top rails meet buckets. Jacks meet driveways.

We just build it so that when it happens, you swap a bolt-on part instead of having to cut and weld.

Want to keep your Liberty for decades? Good. So do we. That's the whole point.

Find a dealer near you. Comment "MYDEALER" and we'll send you our dealer locator map so you can see the difference in person.

08/20/2026

Every business has both kinds of people. The ones who run from the camera, and the ones who were born for it.

🇺🇲

08/18/2026

On a Liberty, they come standard. Every Liberty gooseneck flatbed (LF14K, LF16K, LF22K and LF25K) is built with all five:

☑️ ANTI-TWIST TORQUE TUBE
☑️ RETRACTABLE FRONT-DECK STEPS
☑️ DUAL TWO-SPEED 12,000 lb DROP-LEG JACKS
☑️ (SECOND) LOCKABLE TOOLBOX w/ WINCH MOUNT IN THE NECK
☑️ DEMCO EZ LATCH GOOSENECK COUPLER

That's not all.
✔️ 102" wide deck
✔️ 12" I-beam frame with 6" channel outer rails
✔️ 60" self-cleaning dovetail
✔️ 60" Mammoth Ramps with hold-down latches
✔️ Dexter axles with electric brakes
✔️ LODESTONE magnetic 7-way plug
✔️ sealed wiring harness
✔️ full LED lighting
✔️ spare tire mount
✔️ treated pine floor
✔️ 3-year structural warranty

Find a dealer near you. Comment "MYDEALER" and we'll send it to your DMs.

08/15/2026

Use a skid steer? Fork pockets come welded in standard, all the way across, so you can load from either side without repositioning. Here's every 8" I-beam trailer we build them into:

Equipment Haulers: LE14K83B8 (15,400 lb GVWR) and LE16K83B8 (17,500 lb). 83" wide, 20 to 24', 8" I-beam frame, 36" self-cleaning dovetail, your choice of 44" knee ramps or 32" Mammoth Ramps, oversized lockable tongue box.

Split-Deck Tilts: LT14K83SPB8 (15,400 lb) and LT16K83SPB8 (17,500 lb). 16' hydraulic-dampened tilt platform, tilt-speed control valve, diamond-plate knife edge. Power tilt available.

Dumps: LD14K and LD16K in scissor, telescopic, and gooseneck (15,400 to 17,500 lb). 8" I-beam frame, 7-gauge steel floor, 24" or 40" sides, Max Endurance top rail, combo barn-door/spreader gate, slide-in ramps.

Every one rides on Dexter axles with forward self-adjusting electric brakes, a DEMCO EZ Latch adjustable coupler, LODESTONE magnetic 7-way plug, sealed harness, full LED lighting, and a Sherwin-Williams Powdura finish, backed by our 3-year structural warranty. Detach and Defend removable coupler is available on select I-beam models.

Find a dealer near you. Comment "MYDEALER" and we'll send it to your DMs.