Compressed Air Advisors Online, Inc.

08/11/2026

NO POWER? NO PROBLEM. ⚡😂

Apparently when the owner drives an F-150 with a built-in generator, “the power is out” is no longer an acceptable excuse to close the office.

We had one heck of a storm roll through the area, with tornadoes, downed trees, power outages and damage all around us. Thankfully, everyone here is safe, but it is definitely a mess around town.

So what did we do?

Pulled up the truck.
Plugged in the office.
Fired up the computers.
Compressed Air Advisors is OPEN! 💻⚡🚚

Our website is up and running, orders are processing, and we’re doing our best to keep everything moving while the area gets put back together.

Shop online anytime at www.compressedairadvisors.com

Apparently Mother Nature underestimated both the Ford PowerBoost and the boss’s refusal to take a day off. 😂

No power. No problem. We’ve got compressors to sell.

07/29/2026

💧 Why do automatic condensate drains fail?

One of the most common causes of moisture problems in a compressed air system is a clogged automatic drain.

Traditional solenoid drains rely on a small or***ce that can easily become blocked by compressor oil, rust, pipe scale, and debris. When that happens, condensate builds up inside your air receiver, air dryer, filter, or moisture separator, leading to corrosion, equipment damage, poor air quality, and unnecessary maintenance.

The Midwest Controls MD Series Motorized Ball Valve Automatic Condensate Drain is designed to solve this problem.

Instead of a small or***ce, it uses a full-port forged brass motorized ball valve that opens completely during each drain cycle, allowing dirty condensate to pass through with minimal risk of clogging.

✔ Rated up to 600 PSI
✔ Fully programmable drain intervals from 1 second to 999 hours
✔ Adjustable discharge times from 1 second to 999 hours
✔ IP65 / NEMA 4 environmental protection
✔ UL Approved
✔ Over 200,000 tested operating cycles
✔ Compatible with 115V and 230V

Ideal for:
• Rotary screw air compressors
• Reciprocating compressors
• Refrigerated air dryers
• Desiccant dryers
• Air receiver tanks
• Coalescing filters
• Moisture separators
• Drip legs
• Manufacturing facilities
• Automotive repair shops
• CNC machining centers
• Woodworking operations

Choosing the right automatic condensate drain can reduce maintenance, minimize compressed air loss, and improve the reliability of your entire compressed air system.

At Compressed Air Advisors Online, we help businesses select the right condensate drains, air dryers, filters, compressors, and moisture management equipment to maximize system performance.

📞 Have questions? Our compressed air specialists are ready to help.

07/22/2026

🇺🇸 American-Made Air Compressors Built to Last

When your business depends on compressed air every day, reliability isn't optional.

That's why professionals across the United States trust Saylor-Beall air compressors. Manufactured in St. Johns, Michigan, Saylor-Beall compressors feature heavy-duty cast iron pumps, slow-running designs, and industrial-grade components built for decades of dependable service.

Whether you own an:
✔ Automotive Repair Shop
✔ Woodworking Shop
✔ CNC Machine Shop
✔ Manufacturing Facility
✔ Maintenance Department

we have a Saylor-Beall compressor sized for your application.

At Compressed Air Advisors Online, we carry a complete lineup including:

• Horizontal Air Compressors
• Vertical Air Compressors
• Pressure Lubricated Compressors
• Performance Packages
• Duplex Systems
• Complete Air Treatment Solutions

Need help sizing your system? Our compressed air experts are here to help.

👉 Shop the complete collection:
https://www.compressedairadvisors.com/collections/saylor-beall

🇺🇸 Free Shipping to the Lower 48 States

Shop Saylor-Beall air compressors. Made in the USA, durable, high-performance reciprocating compressors for industrial and shop use.

06/22/2026

🇺🇸 AMERICA'S 250TH BIRTHDAY SALE IS HERE! 🇺🇸

Water in your compressed air can ruin blasting jobs, damage air tools, and slow productivity on the jobsite.

For a limited time, save $250 on the Van Air Systems COOL PAK™ 250 CFM Aftercooler & Filter Combo.

✔ Removes bulk moisture

✔ Cools compressed air

✔ Protects air tools

✔ Built for portable diesel compressors

✔ Ideal for blasting, construction, and mobile operations

🎆 Limited Time Offer

Use Promo Code: COOL250USA

💲 Save $250 at Checkout

👉 Shop Now:
https://www.compressedairadvisors.com/products/van-air-cool-pak-aftercooler-filter-combo-250-cfm

🚚 Nationwide Shipping Available

Compressed Air Advisors Online
Your Compressed Air Partner

06/17/2026

⚙️ READY TO UPGRADE FROM A PISTON COMPRESSOR?

If your shop relies on compressed air all day long, it may be time to step up to a Chicago Pneumatic QRS Rotary Screw Compressor with Integrated Dryer.

The QRS Series combines:

✔ Rotary Screw Compressor

✔ Refrigerated Air Dryer

✔ Air Receiver Tank

✔ Quiet Operation

✔ Continuous Duty Performance

Available from 5.5 HP to 30 HP, these all-in-one systems are ideal for:

🪵 Woodworking Shops

🚗 Auto Repair Facilities

🎨 Auto Body Shops

⚙️ CNC Machine Shops

🔧 Fabrication Shops

🏭 Manufacturing Facilities

Why choose a QRS?

✅ Clean, Dry Compressed Air

✅ Lower Noise Levels

✅ Reliable Day-Long Operation

✅ Compact, Space-Saving Design

✅ Built-In Air Treatment

Stop fighting moisture, downtime, and noisy piston compressors.

🌎 Nationwide Shipping Available

👉 Shop the Chicago Pneumatic QRS Series:
https://www.compressedairadvisors.com/collections/chicago-pneumatic-qrs-rotary-screw-air-compressors-with-dryer

Follow Compressed Air Advisors Online for expert compressed air tips, troubleshooting advice, and equipment recommendations.

06/15/2026

🇺🇸 AMERICA TURNS 250. SAVE $250. 🇺🇸

Compressed air condensate doesn't belong down the drain untreated.

For a limited time, save $250 on Clean Resources Oil-Water Separators designed to remove compressor lubricant from condensate before discharge.

💥 Eligible Models:
✔ IDC-350
✔ CRP-500
✔ CRP-750
✔ CRP-1000
✔ CRP-1500
✔ CRP-2000

Why Clean Resources?

✅ Removes compressor oil from condensate
✅ Handles synthetic and glycol-based lubricants
✅ No messy bag change-outs
✅ Cradle-to-grave warranty
✅ Easy maintenance and long service life

Use Promo Code: CRUSA250

⏳ Limited-Time Promotion

Shop Now:
https://www.compressedairadvisors.com/collections/oil-water-separators/manufacturer_clean-resources

06/10/2026

☀️ IT'S HEATING UP OUT THERE...

And that means one thing for your compressed air system:

💧 MORE WATER

As temperatures and humidity rise, so does the amount of moisture entering your compressed air system.

That excess moisture can lead to:

❌ Water in air lines
❌ Rust & corrosion
❌ Damaged air tools
❌ Poor paint finishes
❌ Equipment downtime

The new Hankison HRHT Series High Temperature Refrigerated Air Dryers are designed specifically for high-temperature applications and can handle inlet temperatures up to 200°F.

✔ Available from 15-100 SCFM
✔ Perfect for reciprocating compressors
✔ Ideal for small HP rotary screw compressors
✔ Reliable moisture removal
✔ Plug-and-play 115V operation

Quit putting it off.

If you're seeing water in your compressed air system, now is the time to install or replace your air dryer.

👉 Learn More:
https://www.compressedairadvisors.com/collections/hankison-hrht-high-temperature-refrigerated-air-dryers

🌎 Nationwide Shipping Available

👉 Follow Compressed Air Advisors Online for more compressed air tips, troubleshooting advice, and equipment recommendations.

06/09/2026

🇺🇸 AMERICA TURNS 250. SAVE $250. 🇺🇸

We're celebrating America's 250th birthday with savings on one of the most respected names in compressed air.

💥 Save $250 on all Saylor-Beall Air Compressor Packages
💥 American Made
💥 Industrial Duty Cast-Iron Pumps
💥 Free Freight to Most Locations

For over a century, Saylor-Beall has built compressors designed for shops, manufacturers, maintenance facilities, and professionals who depend on reliable compressed air every day.

Use Promo Code: SBUSA250

⚠️ Limited-Time Promotion

Shop Now:
www.compressedairadvisors.com/collections/saylor-beall

06/05/2026

⚔️ ROTARY SCREW vs PISTON AIR COMPRESSORS

One of the most common questions we get is:

"Should I buy a rotary screw compressor or a piston compressor?"

The answer depends on your application.

🔧 PISTON (RECIPROCATING) COMPRESSORS

Best For:
✅ Intermittent air demand
✅ Small shops
✅ Auto repair
✅ Woodworking
✅ Lower initial investment

Advantages:
✔ Lower purchase price
✔ Simple design
✔ Excellent for occasional use

⚙️ ROTARY SCREW COMPRESSORS

Best For:
✅ Continuous operation
✅ Manufacturing
✅ CNC equipment
✅ Fabrication shops
✅ High air demand applications

Advantages:
✔ Quieter operation
✔ Higher efficiency
✔ Continuous duty
✔ Longer service life in demanding environments

A common mistake?

Buying a piston compressor for a shop that runs compressed air all day long.

Another common mistake?

Overspending on a rotary screw compressor when a piston unit would do the job perfectly.

The right answer isn't about horsepower.

It's about airflow demand, duty cycle, future growth, and your specific application.

Need help determining which compressor is right for your shop?

🌐 www.compressedairadvisors.com

🌎 Nationwide Shipping Available

👉 Follow Compressed Air Advisors Online for more expert compressed air tips, sizing advice, and troubleshooting guidance.

06/04/2026

❄️ WHAT IS DEW POINT AND WHY SHOULD YOU CARE?

If you've ever dealt with water in your compressed air system, you've probably heard someone mention "dew point."

But what does it actually mean?

Dew point is the temperature at which water v***r in compressed air begins to condense into liquid water.

The lower the dew point, the drier your compressed air.

For example:

🔹 Refrigerated Air Dryers typically provide a pressure dew point around 38°F.

🔹 Desiccant Air Dryers can achieve dew points as low as -40°F or even -100°F.

Why does this matter?

A lower dew point means:

✅ Less moisture in your air system
✅ Better protection for equipment
✅ Reduced corrosion
✅ Fewer product quality issues
✅ Improved reliability

Industries such as CNC machining, woodworking, food processing, pharmaceuticals, automotive painting, and electronics manufacturing often require very dry compressed air to prevent costly problems.

The wrong dew point can lead to:

💧 Water in air lines
💧 Rust inside piping
💧 Damaged air tools
💧 Poor paint finishes
💧 Product contamination

Understanding dew point is one of the most important steps in selecting the right air dryer for your application.

🌎 Nationwide Shipping Available

🌐 www.compressedairadvisors.com

👉 Follow Compressed Air Advisors Online for more expert compressed air tips, troubleshooting advice, and equipment sizing guidance.