Nashville Pump and Power

Call Directions Website Contact the business

Nashville Pump and Power Nashville Pump & Power is an industry leader in pumping applications with over a decade of experience and knowledge with all of the latest technology!

At Nashville Pump & Pond, we have everything you need to successfully install your pumps with service-oriented staff and pumps for all purposes. We work hard to combine cutting-edge technology and a deep understanding of our market to provide solutions that successfully fulfill the demands of our clients while staying competitively priced. With more than 12 years of experience in the industry, we at Nashville Pump & Pond are ready to help you find the right pump equipment for your business. Our water pumps are designed for a wide range of uses: industrial, commercial and agricultural. No matter what your clients are looking for, we have the perfect array of inventory to satisfy their needs. Have a question about our products? Contact us today! Follow us on Twitter: https://twitter.com/pumpandpond

Call Us: 615-835-3145

Email Us: [email protected]

Visit Us:
1435 Spencer Mill Road
Burns, TN 37029


Our social media accounts are an extension of our brand that intend to foster and develop the relationship we have with our customers. Nashville Pump and Pond will use its different accounts to educate customers about pond pumps and more. Our accounts were created to act as open channels of communication between Nashville Pump and Pond and our customers. All parties are encouraged to express their comments, questions or concerns, as well as share their own photos, videos and links that relate to the topics related to each account. We want these accounts to be a fun, family-friendly, and informative source for all users interested in concrete. To keep our accounts clean and family friendly, we ask that you follow our posting guidelines here:

• Posts that are graphic, obscene, explicit, abusive, hateful or intended to defame anyone or any organization will be deleted.
• Irrelevant or nonsensical posts will be deleted.
• Comments or photos that suggest or encourage illegal activity will be deleted.
• You participate at your own risk, taking personal responsibility for your comments, your username and any information provided. Immediate Response Issues

While our policy is to respond to any post or private message within 24 hours on any of our social media accounts, contacting our office directly is the best way to resolve immediate-response questions or requests.

APEX Heavy Duty — American-made submersible dewatering and mine-duty pumps. No offshore parts in the build.According to ...
10/03/2026

APEX Heavy Duty — American-made submersible dewatering and mine-duty pumps. No offshore parts in the build.

According to APEX: permanent-mold high-silicon aluminum castings, Class H motors for tough ambient and duty cycles, 17-4 PH stainless impellers, and tungsten carbide seal faces aimed at mining wear. Site range is about 6–60 HP, up to ~1000 GPM and ~150 PSI.

We stock and support APEX for distributors and installers from Dickson, TN.
615-835-3145 · pumpandpower.com

Submersible motors are not one construction for every well.Tesla builds canned-stator water-filled motors (smaller frame...
10/03/2026

Submersible motors are not one construction for every well.

Tesla builds canned-stator water-filled motors (smaller frames) and rewindable motors for larger frames — so the construction matches the duty, not just the horsepower. According to Tesla/DAB's catalog: canned-type water-filled lines in the smaller diameters, plus rewindable builds through larger frames. NP&P pairs Tesla motors with submersible turbine packages when the job calls for it.

Questions on canned vs rewindable for a well or irrigation job? We're in Dickson, TN.
615-835-3145 · pumpandpower.com

Not every sewage job needs the same kind of solids handling.A standard sewage pump is built to pass solids (often up to ...
10/03/2026

Not every sewage job needs the same kind of solids handling.

A standard sewage pump is built to pass solids (often up to 2"). A grinder is different — it shears difficult debris into a slurry before it hits the line. Liberty's Omnivore LSG200-Series uses V-Slice cutter technology in hardened stainless steel for residential and light commercial jobs where wipes, rags, and tough solids show up.

We stock Liberty grinders, sewage, and sump pumps for distributors and installers from Dickson, TN.
615-835-3145 · pumpandpower.com

Construction dewatering and abrasive slurry are not the same job — and they should not share the same wet end.Mody build...
10/02/2026

Construction dewatering and abrasive slurry are not the same job — and they should not share the same wet end.

Mody builds electric submersible pumps for dewatering, slurry, and wastewater. Dewatering models focus on drainage at pits, tunnels, and job sites. Slurry models use high-chrome wet ends, with agitators available for abrasive solids. Matching the series to the fluid beats chasing GPM alone.

We supply Mody to distributors and installers from our shop in Dickson, TN.
615-835-3145 · pumpandpower.com

Built to be serviced: a look inside an SME USA submersible motor.SME's water-filled motors are wet-wound, and SME's cata...
10/01/2026

Built to be serviced: a look inside an SME USA submersible motor.

SME's water-filled motors are wet-wound, and SME's catalog says they can be rewound and repaired. Inside you'll find a Kingsbury-type thrust bearing (a carbon disc with hardened stainless steel shoes), carbon sleeve bearings at both ends, a stainless steel stator jacket, and PT100 temperature sensors in the windings.

Questions about SME 60 Hz motors? Give us a call.
615-835-3145 · pumpandpower.com

Sizing a submersible motor for a 60 Hz well or irrigation job? We supply SME USA motors.SME's 60 Hz lineup includes 6" s...
10/01/2026

Sizing a submersible motor for a 60 Hz well or irrigation job? We supply SME USA motors.

SME's 60 Hz lineup includes 6" single-phase 230 V motors from 5 to 15 HP, plus three-phase motors from 6" up, with 230, 460, and 575 V options.

Send us your HP, voltage, and phase, and we'll help match the right SME motor to the job. 💧
615-835-3145 · pumpandpower.com

Staged in our Dickson yard: a vertical turbine bowl assembly and column pipe sections, ready to go.Getting the bowls, co...
09/28/2026

Staged in our Dickson yard: a vertical turbine bowl assembly and column pipe sections, ready to go.

Getting the bowls, column, and discharge head matched to your well or wet pit is what we do every day.

Need a VT for a municipal, ag, or industrial job? Call us.
615-835-3145 · pumpandpower.com

Three vertical turbines, one floating station. 🌊When a quarry pit rises and falls, a floating platform keeps every pump ...
09/28/2026

Three vertical turbines, one floating station. 🌊

When a quarry pit rises and falls, a floating platform keeps every pump at the right depth, so you're not chasing water with a fixed bank.

We design and sell floating pump systems for quarry, irrigation, and industrial intake.

Nashville Pump & Power · Dickson, TN
615-835-3145 · pumpandpower.com

NP&P 4"–8" water well strap pumps — multi-stage stainless builds for the well.Our 5.5SS Series 1 strap pumps are sized f...
09/25/2026

NP&P 4"–8" water well strap pumps — multi-stage stainless builds for the well.

Our 5.5SS Series 1 strap pumps are sized for water-well duty with staged horsepower options across the line. Stainless investment-cast impellers are standard; all-stainless construction options are available when the water calls for it. A distinct NP&P line — not your everyday submersible turbine.

Distributors and installers: 615-835-3145 · [email protected]
pumpandpower.com

Cornell pump skid packages — pump, motor, controls, and skid as one ready unit.We package Cornell pumps with the motor, ...
09/25/2026

Cornell pump skid packages — pump, motor, controls, and skid as one ready unit.

We package Cornell pumps with the motor, controls, and skid your installers need on site. Heavy skid base with pumpandpower.com right on the frame so the job shows up branded and install-ready.

Distributors and installers: 615-835-3145 · [email protected]
pumpandpower.com

Address

195 Taylor Street
Dickson, TN
37055

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 4pm
Thursday 8am - 4pm
Friday 8am - 4pm

Telephone

(615) 835-3145

Alerts

Be the first to know and let us send you an email when Nashville Pump and Power posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nashville Pump and Power:

Shortcuts

Share