Hester Welding and Fabrication LLC

Hester Welding and Fabrication LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Hester Welding and Fabrication LLC, Metal Fabricator, Desloge, MO.

Owner/Operator: Brock Hester
Specializes in turbo kits, exhaust fabrication, farm equipment repair, frame rust repair, race car part repair and fabrication, body panel welding, etc.

•12-Shirt sleeve aluminum platen boards fabricated. •Mobile grapple claw fabricated and welded for wider width for custo...
09/09/2026

•12-Shirt sleeve aluminum platen boards fabricated.
•Mobile grapple claw fabricated and welded for wider width for customers needs.
• Excavator injection pump crack welded to get customer up and going.
• Cellar door fabricated and welded.
•Hard line repaired and welded to get customer up and going. 
• Discontinued, tractor ends, fabricated, sleeved, and welded
• Mobile pump truck repair.
• Call with any of your welding or fabrication needs. 573-366-5733

•Wrecker boom repaired and welded to get customer back and going. •Aluminum basket bent tubing cut out, new tubing fit a...
08/07/2026

•Wrecker boom repaired and welded to get customer back and going.
•Aluminum basket bent tubing cut out, new tubing fit and welded.
•Trailer tounge supports welded for tool box, diamond tread cut and tool box installed.Trailer jack supports welded on rear of trailer.
Call with any of your welding or fabrication needs. 573-366-5733

•Buick Lesabre 3” stainless exhaust fabricated and welded. Brackets fabricated for air to water intercooler,ice tank, ca...
07/29/2026

•Buick Lesabre
3” stainless exhaust fabricated and welded. Brackets fabricated for air to water intercooler,ice tank, catch can and aluminum lsa intercooler brick reinforcement plates welded.

•Excavator aluminum hydraulic oil cooler weld side tanks and radiator tubes that were broke to get customer up and going.

• Kenworth w900 engine mount broke and new one fabricated to get customer back on the road.

•New Holland skid steer cast manifold broke and multiple stress cracks. Manifold is discontinued. Built him a new one o...
07/20/2026

•New Holland skid steer cast manifold broke and multiple stress cracks. Manifold is discontinued. Built him a new one out of stainless to get him back to work.
•Transmission cast aluminum bell housing ears broke off and dowel pin repaired and welded.
•Bent and cracked trailer tounge repaired and welded.
• Bucket outer shanks welded, bottom patched and hardfaced.
• Call with any of your welding or fabrication needs. 573-366-5733

•Excavator blade repaired and welded. •Aluminum fuel transfer tank top busted and b**g. New top and b**g welded. • Trail...
06/30/2026

•Excavator blade repaired and welded.
•Aluminum fuel transfer tank top busted and b**g. New top and b**g welded.
• Trailer axle that’s no longer available for parts new spindle welded and hub installed to get them back on the road.
•Call with any of your welding or fabrication needs. 573-366-5733

•1980s Ford p/uStainless 3” exhaust fabricated and welded to fit fenderwell headers. Traction bars welded and installed....
06/25/2026

•1980s Ford p/u
Stainless 3” exhaust fabricated and welded to fit fenderwell headers.
Traction bars welded and installed.
Rear bumper brackets reworked to line up with body.
• Aluminum boat customer wanted some holes filled on the transom and new winch bracket fabricated and welded.

•Call with any of your welding or fabrication needs 573-366-5733

•Aluminum handle repaired and welded. •Excavator stationary arm fabricated and welded to get customer going. •Call with ...
06/03/2026

•Aluminum handle repaired and welded.
•Excavator stationary arm fabricated and welded to get customer going.
•Call with any of your welding and fabrication needs. 573-366-5733

•Hayabusa aluminum engine case broke and side case bolt bosses repaired,welded, drilled and tapped. Broken aluminum fair...
05/22/2026

•Hayabusa aluminum engine case broke and side case bolt bosses repaired,welded, drilled and tapped. Broken aluminum fairing stay welded.
•Pontoon aluminum toon holes, crack repaired and welded to get customer ready for the weekend.
• Call with any of your welding or fabrication needs. 573-366-5733

•Z turn mower engine plate broke off repaired and welded back on. •Antique cast aluminum cracked chairs welded. •Trailer...
05/15/2026

•Z turn mower engine plate broke off repaired and welded back on.
•Antique cast aluminum cracked chairs welded.
•Trailer tongue bent new tounge fabricated and new hitch welded.
•Aluminum engine case crack repaired to get customer going.
•Call with any of your welding or fabrication needs. 573-366-5733

•61 Chevy c10 customer wanted a budget friendly stainless exhaust fabricated and welded. •Camshaft aluminum cap broke th...
05/07/2026

•61 Chevy c10 customer wanted a budget friendly stainless exhaust fabricated and welded.
•Camshaft aluminum cap broke the boss off for valve cover welded up for hole to be threaded.
•Camper jack leveler bent arm new arm fabricated and welded to get customer going for part not available.
•Dog trailer axle fabricated and welded customer wanted certain track width and wider tires for his off road dog trailer.

Address

Desloge, MO

Telephone

+15733665733

Website

Alerts

Be the first to know and let us send you an email when Hester Welding and Fabrication LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hester Welding and Fabrication LLC:

Shortcuts

Share

Category