Bob's Electric Motor Service

Bob's Electric Motor Service Bob's Electric Motor Service Inc. has been serving Denver, Colorado since 1968. We can service your equipment whether domestic or foreign.

Our team of experts has the knowledge to help you solve any of your electric motor or electric pump issues. We carry a large amount of inventory and maintain a fully equipped machine shop for repairs.

02/29/2024

Drum pumps are used to pump small quantities of liquid out of carboys and drums. Drum pumps are very thin, allowing them to be inserted into a drum opening; the smaller diameter tube surrounding the shaft works through the use of a hand-trigger controlled motor.

02/27/2024

Is your pump working, but giving you little to no water? This could be caused by air in the pump, a low well water level, a leak in the drop pipe, or a jammed check valve. Whatever the cause, a well expert can help fix it and get your well pumping again.

02/22/2024

A noisy water pump is usually a sign of a worn or defective pump bearing or pump impeller, loose components, or pump vibration. Inspect the pump assembly bearings and pump motor mounts for signs of wear or deterioration, and replace them if needed.

02/20/2024

A well pump located too close to the water surface won’t operate properly. It’s also subject to cavitation, a condition that occurs when the flow rate is too high or the pipe size is too small, either of which can cause v***r bubbles to form.

02/15/2024

A two-line jet pumps means that there are two pipes connecting the pump to the well. Because of how they operate, they need water to run, and priming capabilities are important. If you have a two line jet pump, and it has stopped working, check the priming mechanism.

02/13/2024

If you don't have the water pressure you need, or your pump isn't powerful enough, then a well pump expert can help by installing a booster. This booster ties into your existing equipment, but helps give it the power you need.

02/08/2024

Most water pumps use a centrifugal pump, but if you have a low volume situation with a lot of mud, you need a different kind of pump. That's why pumps for these situations are usually positive displacement, which means they pump by taking a fixed amount and pushing it through the pipe.

02/06/2024

If the well pump is short cycling, it needs to be checked and repaired or replaced as necessary. Short cycling puts undue strain on the motor, causing it to overheat and wear out well before the natural end of its service life, adding to the expense.

02/01/2024

Four forms of energy are components of industrial pump systems: pressure, velocity, elevation, and friction. Each describes or explains the movement of liquids within the system.

01/30/2024

A water hammer is created when a sudden stop in the flow transmits the pressure force back to the pump, and can cause damage to the pump. Fortunately, a water pump expert can fix the damage, and help you figure out how to keep it from happening again.

01/25/2024

Part of designing a centrifugal pumping systems involves looking at the static discharge head. This is the vertical distance between the pumps centerline and the point of discharge or the surface of the liquid in the tank, typically measured in feet.

01/23/2024

You make sure to take your car into the mechanic for regular service, right? Then you’ll want to do the same thing for your well pumps. Experts recommend that your well system and pumps get an annual checkup to make sure that everything’s functioning well.

Address

Denver, CO

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm
Saturday 8am - 12pm

Telephone

+13037443297

Website

Alerts

Be the first to know and let us send you an email when Bob's Electric Motor Service posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bob's Electric Motor Service:

Shortcuts

Share

Category