TR'S Tool Service LLC

TR'S Tool Service LLC Small Specialty machine shop specializing in custom made Sprint car parts, carburetor adapters and Electric Pit Lifts

05/21/2026

Only 7 days left to place your order

Here is your Gen II all electric lift. We tested all of 2025 with zero issues and we are now offering them for sale. The...
05/02/2026

Here is your Gen II all electric lift. We tested all of 2025 with zero issues and we are now offering them for sale. They use 2 1700lb Linear Actuators that have a 3400 holding power each. They pick up a 3000lb stock car with ease. You can power off of a 12v battery in your car or the supplied 24v inverter. They come with 2 remotes, 1 is on a keychain. they are 17 1/4" lifting height and can be made to lift higher in the rear as an option. They will lift a 3000 car in 32 seconds and you don't have to stand there holding a button they go up to a limit switch and down to a limit switch. They can be changed to you must hold the button the entire time if wanted. We can make them any width to fit your need and with the changeable center you don't need to buy a new lift if you go from 1 class to another that have different frame widths. You can break the lift down into 2 separate halves in under a minute.

Each unit is machined and built by just 1 person.

I guess if I cant sleep I might as well be making parts....
04/30/2026

I guess if I cant sleep I might as well be making parts....

2 more new products to our line up.Aluminum 2.5 diameter hood pin scuff plates, center hole is .510 dia with .195 dia ho...
04/28/2026

2 more new products to our line up.

Aluminum 2.5 diameter hood pin scuff plates, center hole is .510 dia with .195 dia holes to rivet onto your body. Unlike others that you can not get a rivet though the hole to begin with. Made out of .05 thick aluminum unlike those cheap ones out of .02
These are made in the USA with USA materials.
Available in 2pk, 4pk or 8pk

3/16 hood pin flip over clips 4 pk

Both available to purchase at trstoolservice.com

Aluminum hood pins and carb/air filter nuts coming soon

Need to Congratulate Swanson Racing on another win at Bridgeport Speedway with a few custom built pieces for their 602 n...
04/17/2026

Need to Congratulate Swanson Racing on another win at Bridgeport Speedway with a few custom built pieces for their 602 non-wing sprint. Thats 2 for 2 for them. Just a note: custom built parts for customers are for that customer. If you call and ask me to send you what I made for them you will not get it. I am BIG on confidentiality to the customers that PAID for custom products. I will build you whatever you want to whatever specifications you want. The only thing I share with customers is what I put into my own products that I sell. When you become a customer that has has supported me by buying my products then you become "One of my Guys (or Gals)" on occasion I reach out to my people and ask them to try this and give me your opinion. On that note: Dyno numbers dont mean s**t if it doesn't race good. Thank you everyone that supports my little 1 man shop. If you are like me and every minute of every day I am trying to figure out how to make stuff faster within the rules that are in Black and White, and you have ideas but no way to implement them please dont be afraid to reach out. What we discuss stays between us.

Another new product fresh out of the Integrex.TR's Countersunk aluminum washers, 1 1/4" dia countersunk for 1/4-20 flat ...
04/03/2026

Another new product fresh out of the Integrex.

TR's Countersunk aluminum washers, 1 1/4" dia countersunk for 1/4-20 flat head cap screw. Available with Stainless 1/4-20 x 1" cap screws and nylocks or bare.

Made in the USA (Denton, Nebraska)

Purchase at trstoolservice.com

$18.00 flat rate shipping, FREE Shipping on orders $150 or more

TR's 2026 Sponsorship program:So here is what we are going to do for 2026. Every order I send out has 2 contingency stic...
03/24/2026

TR's 2026 Sponsorship program:

So here is what we are going to do for 2026. Every order I send out has 2 contingency stickers with the order. They are 7"x3" put them on the car and win an A feature, send me a picture in Victory lane, or with the "Big" check after the races with the sticker visible in the picture and you will receive $25 off your next order of at least $100. Feature win must be able to be verified by MRP or the tracks website results. Photo shopped images not accepted. Max 10 feature wins per car/driver
So here you go guys and gals. Go dig that sticker out of the garbage, get it on the car, and go win some races!

We would like to congratulate Swanson Racing on their first win of the season at Bridgeport Speedway using our new carbu...
03/22/2026

We would like to congratulate Swanson Racing on their first win of the season at Bridgeport Speedway using our new carburetor linkage adapter and custom made carb spacer on their 602 crate sprint car. They did some on track testing a few weeks ago and definitely found some speed.

We finally have all of the colors back from anodize and are ready to ship.
03/13/2026

We finally have all of the colors back from anodize and are ready to ship.

We had a successful night of testing our new 602 carb spacers at Beatrice last night. I was supposed to have 4 of them o...
03/13/2026

We had a successful night of testing our new 602 carb spacers at Beatrice last night. I was supposed to have 4 of them out there but 1 guy ended up not being able to make it and one did not have time to change it during the night. The feedback from the other 2 was nothing but positive. I told the drivers to give me their honest opinion and they both said they could feel definite improvement in the bottom end power and they both said that it felt like it pulled better all the way to the chip. We will have 1 of them for sure running tonight for the first night of the Beatrice Spring Nationals. Unfortunately I will not be able to attend tonight but I will be watching when I get back.

I have 4 of these available to purchase now and will be running 100 of them in the next week.

Address

5800 W Yankee Lake Road
Denton, NE
68339

Alerts

Be the first to know and let us send you an email when TR'S Tool Service LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share

Category