Xineering

Xineering American-made motorsport electronics & suspension solutions. Precision & Reliability shipped from Florida.

From plug‑and‑play modules enabling spark‑cut, throttle‑blip, rev‑matching shifting to MagneRide bypass kits for GM & Ford. Custom - Engineered - Solutions
Xineering is an engineering design firm that provides custom solutions to a wide variety of industries. Hardware - Software - Firmware - Embedded Circuit Design - Reverse Engineering

05/13/2026

New personal best at Circuit of the Americas - 2:22.77

E. McCloskey brought his 2013 C6 Z06 to COTA running 606rwhp on Hoosier A7s with AP Racing brakes and our Downshift Blip Module. Consistent, perfectly rev-matched downshifts lap after lap so he can focus on hitting his marks.

In his words: "You've got a great product that works very well on the track!"

The Downshift Blip Module delivers active rev matching on every downshift. No tuning required! Whether you're chasing lap times or just want smoother, faster shifts on track, it's the easiest upgrade you'll make.

Check it out → xineering.com

Calling all Central Florida Mustang GT owners! 👋We're developing the ShockSims VDM-E to support the S550 Mustang GT (201...
04/27/2026

Calling all Central Florida Mustang GT owners! 👋

We're developing the ShockSims VDM-E to support the S550 Mustang GT (2015-2023) [Including the Bullitt], and we need a local car to work with. Auto or manual is fine, but it needs to be equipped with MagnaRide suspension.

Have a manual GT? We're also exploring a way to simplify our Downshift Blip Module installation on the 15-23 range, too, so you could help us move two projects forward at once.

Based in the Greater Orlando area? Tag someone, comment, or DM us! If we end up working with you, your time will be compensated.

The car community has a way of connecting the right people. 🤝We were at Classic Mazda's 18th Annual Race Exhibition two ...
04/20/2026

The car community has a way of connecting the right people. 🤝

We were at Classic Mazda's 18th Annual Race Exhibition two weekends ago when we got talking to a Subaru owner who told us about his recommended shop. He said he'd called around and Solo Subie Solution was the only place willing to take on his build. That kind of reputation gets your attention. So we made the trip to DeLand and visited.

Kerry's shop did not disappoint. Subaru performance and maintenance specialists with a Mustang Dyno on-site, 800+ hp builds in the bays, and a genuine passion for the platform. Subaru daily driver oil change or full-send build, they handle it all.

We had a great conversation about what the Downshift Blip Module brings to Subaru owners, and Kerry is already eyeing our GCU for himself. 👀 We're also planning to link up again at Subiefest Florida 2026, so stay tuned...

This is exactly what the car community is about. One conversation leads to another, and before you know it, you've found a shop putting in the work. 💪

If you're in the DeLand area and drive a Subaru, go give Solo Subie a visit.

BTW when you give them a call, Kim knows her stuff and will get you any info you need!

🏁 We are heading to the 18th Annual Classic Mazda Race Exhibition this Saturday, April 11th!If you're in the Orlando are...
04/08/2026

🏁 We are heading to the 18th Annual Classic Mazda Race Exhibition this Saturday, April 11th!

If you're in the Orlando area and drive an NC/ND Miata or an RX8, this is your chance to come see the Downshift Blip Module in person. We'll be set up at Classic Mazda all evening for you to ask us anything, see how active rev matching actually works, and grab some time with the team.

📍 Classic Mazda | 1983 N Semoran Blvd, Orlando
🗓 Saturday, April 11th | 5:00 PM – 8:00 PM

🔗 Full product info: xineering.com/dbw_mazda.html

The event itself is a great time! BSI Racing is bringing two race cars out, there's a six-lane Hot Wheels track, a full car show, simulators, food trucks, and special guests, including Shea Holbrook and Tyler Gonzalez.

Whether you're already running our system or just Mazda-curious, come hang. We'll see you there. 🔴

RSVP at the link: events.classicmazda.com/annual-race-exhibition

Upgrading your Sierra Denali or Silverado High Country shouldn’t mean living with a “Service Suspension System” warning ...
10/15/2025

Upgrading your Sierra Denali or Silverado High Country shouldn’t mean living with a “Service Suspension System” warning on the dash. At ShockSims, we manufacture plug‑and‑play modules that let you remove the factory Z45 Adaptive Ride Control shocks without any calibration.

* OBD/SS ARC (2019–2022.5 gas): connects behind the OBD‑II port and bypasses the Z45 system on earlier trucks.
* ARC‑R (2022.5–2025 gas): plugs into an 8‑pin connector under the passenger seat and eliminates the warning on newer trucks.
* ARC‑MAX (2019+ Duramax): a set of four plug‑and‑play shock simulators with OE connectors designed specifically for Duramax‑equipped 1500s.

Every module is assembled and tested in-house, uses motorsport‑grade wiring, and installs in about 10–20 minutes. You’ll get rid of dash warnings, gain full control over your suspension, and be ready for lift kits or aftermarket shocks. Made and supported in the USA.

Ready to lift or upgrade? Visit ShockSims.com to find the right module for your truck.

07/01/2025

Raw. Loud. Unapologetic.
Cold start on a track-prepped C6 Z06

The GR86 doesn’t include iMT rev-matching on the manual transmission, but it doesn't have to stay that way.Say hello to ...
06/30/2025

The GR86 doesn’t include iMT rev-matching on the manual transmission, but it doesn't have to stay that way.

Say hello to our Downshift Blip Module!

Designed for all manual GR86s, first and second gen, it brings smooth, consistent rev-matching to every downshift, without needing to heel-toe.

✔️ Tunable throttle blip
✔️ OEM-style, plug-and-play install (2022+)
✔️ Pre-Calibrated

If you’re looking for more control, smoother corner entries, and a better drive, this is the upgrade the GR86 should’ve come with.

We added some more Sadev HR6 photos from the great weekend! 👊🏁 ..[SADEV USA 🇺🇸]Strong Debut for Howe Racing / Turnkey...
06/24/2025

We added some more Sadev HR6 photos from the great weekend! 👊🏁


..
[SADEV USA 🇺🇸]

Strong Debut for Howe Racing / Turnkey Automotive HR6 at Mid-Ohio TransAm!🏁

The racing debut of the Howe Racing / Turnkey Automotive HR6 was a resounding success this past weekend at the Mid-Ohio event.
The HR6—a tube chassis race car engineered by Howe Racing and powered by a Turnkey Automotive GM 4.3L V6—made a strong impression in its first competitive outing. 💥

🏎️ Three HR6 cars hit the track, piloted by Rich Rinke, Jack Rinke, and Todd Napieralski.
Each driver showcased the car’s performance and reliability, with Todd Napieralski securing an impressive 3rd place finish in the GT class—a testament to the platform’s potential.

The HR6 transmits its power to the ground through the proven SADEV SCL8217 inline six-speed sequential transmission, further enhancing its competitive edge. ⚙️

👉 This marks a promising start for the HR6, signaling great things ahead for the collaboration between Howe Racing and Turnkey Automotive. 🤝

We added some more HR6 photos 👍Great recap!! ..🏁 Race Weekend Recap 🏁Proud sponsor moment! The Cynergy Composites car ...
06/24/2025

We added some more HR6 photos 👍
Great recap!!

..
🏁 Race Weekend Recap 🏁
Proud sponsor moment! The Cynergy Composites car landed a podium finish at Mid-Ohio, with all three Howe Enterprises cars finishing clean and strong — zero damage across the board. 💪

It was also a milestone weekend as Howe Enterprises unveiled their brand-new HR-6 Trans Am 2 cars, making a powerful debut in the GT class.

Congratulations to the entire team for a successful outing — precision, performance, and professionalism on full display.

GCU and Paddle Shift equipped Vipers at Pittsburgh International Race Complex for National Viper Event 6!Be sure to st...
06/24/2025

GCU and Paddle Shift equipped Vipers at Pittsburgh International Race Complex for National Viper Event 6!

Be sure to stop by the tent!

Let's Blipping get this!

Address

1211 S Woodlands Blvd
DeLand, FL
32720

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

https://shocksims.com/

Alerts

Be the first to know and let us send you an email when Xineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Xineering:

Shortcuts

Share

Category