Ben Brown Welding and Fabrication

Ben Brown Welding and Fabrication Ben Brown Welding can handle all of your Mild steel, Stainless, and Aluminum welding

05/09/2026

Sheewwee

đź‘€
05/09/2026

đź‘€

Today’s haul, 240’ of chromoly
01/02/2026

Today’s haul, 240’ of chromoly

There’s different meanings of “success“. The last couple days certainly haven’t made me any money, but were very success...
11/30/2025

There’s different meanings of “success“. The last couple days certainly haven’t made me any money, but were very successful. I’ve been busy doing some much needed maintenance and improvements out at the shop. I picked up two bolt bins a couple weeks ago loaded with mixed up standard coarse and fine thread hardware. After painstakingly going through every nut and bolt, both bins are now perfectly organized. I modified my V rollers to instead be a backer to feed my bandsaw. Spent some time on the property and added gravel getting into the door. No more plywood and 2x4s. Finally got these gates welded out that have been laying around here since last year (for a different property). And lots of other little things

This weekends shenanigans;Ford 8.8, remove and re weld shock and 4 link brackets, add brace kit. Sweet V8 Lexus ISF got ...
11/02/2025

This weekends shenanigans;
Ford 8.8, remove and re weld shock and 4 link brackets, add brace kit.
Sweet V8 Lexus ISF got some new high flow cats

Added a funny car cage to this 10pt RSM kit, and a dash bar. It was a little touchy integrating it into the cage with th...
10/27/2025

Added a funny car cage to this 10pt RSM kit, and a dash bar. It was a little touchy integrating it into the cage with the radius of my bender dies 🤷‍♂️ but we made it 👏 The seat will be positioned several inches forward of the main hoop

I’m told it’s time to let this cat out of the bag. Back in February I got this unit to receive a fresh new turbo kit. Pr...
09/29/2025

I’m told it’s time to let this cat out of the bag. Back in February I got this unit to receive a fresh new turbo kit. Problem was I was in a time crunch, and so was the car. So it was dropped off, then picked up 9 days later

Brought my rear end pucks and bar out to shop, which means it’s almost time to do something fun again
09/28/2025

Brought my rear end pucks and bar out to shop, which means it’s almost time to do something fun again

Moved some bungs and tabs around
09/25/2025

Moved some bungs and tabs around

I always liked these, but they never made it in previous posts
09/08/2025

I always liked these, but they never made it in previous posts

Address

Dayton, OH

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

(937) 689-1139

Website

Alerts

Be the first to know and let us send you an email when Ben Brown Welding and Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category