Hamar Laser Instruments, Inc.

Hamar Laser Instruments, Inc. Laser Calibration, Alignment & Measurement Systems - Machine Tools, Bore Alignment, Spindles & Rolls

05/27/2026

Flatness and leveling checks only help if they are fast enough to actually get done.

Hamar Laser’s L-730 and L-740 Flatness and Leveling systems use an auto rotating laser plane to eliminate manual pointing and constant walking back to the laser. You place the target, capture the point, and move on.

What that changes:
• Data in 2 to 6 seconds per point
• Up to 70% faster than optics and levels
• Real time wireless updates with a 100 ft (30 m) radius operating range
• Report ready results in Plane5, plus PDF export and Excel export on Windows

If you want practical checks that catch drift early, speed and repeatability are the whole game.

Today we remember and honor those who gave their lives in service to our country.From all of us at Hamar Laser, thank yo...
05/25/2026

Today we remember and honor those who gave their lives in service to our country.

From all of us at Hamar Laser, thank you to the families who carry that sacrifice.

05/20/2026

Extruder alignment does not need to be an all-day event.

The L-703B Twin-Barrel Extruder Laser Alignment Borescope is designed for fast setup at the gearbox, quick measurements, and real-time feedback during adjustment.

When the check is repeatable and practical, it stops being a last-resort job and becomes part of normal maintenance.

05/18/2026

Twin-barrel extruders are where alignment stack-up gets expensive fast.

If the check takes hours, it gets delayed. If the check is practical and repeatable, it becomes routine, and problems get corrected before wear and downtime take over.

05/13/2026

Lathe alignment is not just a one-time check. It is geometry.

Lathe10 Alignment Software supports real-time 4-axis alignment data for headstock to tailstock or turret centers, plus geometry checks like guideway straightness and spindle axis parallelism.

The point is not extra features. The point is a guided, repeatable workflow that turns measurement into a correction you can trust.

05/11/2026

Hardware measures. Software determines whether the process is repeatable.

When the workflow is clear and the data is consistent, geometry checks get done. When it is confusing, verification becomes optional and problems creep in.

05/06/2026

Transfer line productivity lives or dies on spindle axis alignment.

The L-700 Spindle Laser Alignment System is built to check and adjust transfer line machines faster and with less variability than conventional methods. It provides real-time readings so alignment errors can be corrected without constantly changing the setup.

When verification is fast and repeatable, it becomes part of the process instead of a last resort.

05/04/2026

Transfer line downtime is rarely one big failure. It is usually small spindle axis and geometry issues that build up into tool breakage and quality losses.

The fix is not more reminders. It is making verification practical enough to become routine.

04/29/2026

Bore alignment is where guessing gets expensive.

Checking an engine block’s bearing bores for concentricity and straightness can be slow and difficult with older methods, and repeatability can vary from operator to operator.

The L-703B Self-Centering Bore Alignment System is designed to make bore alignment faster and more repeatable:
- Patented self-centering targets require one measurement per bore, no 0° and 180° routine
- Setup in as little as 15 minutes, with results often analyzed in 30 minutes or less
- Simple X-Y readouts reduce training time and support consistent results between technicians

When the method is fast and repeatable, checks actually happen, and corrections stick.

04/27/2026

Baseline first. Then adjust.

Bore and centerline alignment only works when the reference is clear and the readings are repeatable. If the method is inconsistent, corrections turn into guesswork and the problem just moves.

Verification is what makes the next step matter.

04/22/2026

Roll alignment drift is slow until it is suddenly not.

Tracking issues, wrinkles, uneven wear, and quality variation usually show up long before a line forces a shutdown.

Hamar Laser’s L-732 Precision Dual Scan and L-742 Ultra-Precision Dual Scan systems are built to verify roll and machine geometry with repeatable measurement, so small drift gets caught early while it is still easy to correct.

Address

5 Ye Olde Road
Danbury, CT
06810

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 11:59pm

Telephone

+12037304600

Website

Alerts

Be the first to know and let us send you an email when Hamar Laser Instruments, Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hamar Laser Instruments, Inc.:

Shortcuts

Share

Category