JTK Weld & Machine

JTK Weld & Machine We are a small welding and machine shop in Dalton City.

What do you do when your grandson's crib is missing a part? Well, you go out to the shop and make one.
01/10/2026

What do you do when your grandson's crib is missing a part? Well, you go out to the shop and make one.

Had to cut the bellhousing off a Powerglide. It is getting replaced with an SFI approved aftermarket bellhousing.
12/15/2025

Had to cut the bellhousing off a Powerglide. It is getting replaced with an SFI approved aftermarket bellhousing.

Hydraulic cylinder repair for a log splitter.
10/13/2025

Hydraulic cylinder repair for a log splitter.

Customer needed some flats machined on a few washers.
10/13/2025

Customer needed some flats machined on a few washers.

Turning some brake drums in the old Southbend.
10/10/2025

Turning some brake drums in the old Southbend.

Had to weld up the bearing area, turn, and cut a new snap ring groove in a shaft for a horizontal band saw.
10/10/2025

Had to weld up the bearing area, turn, and cut a new snap ring groove in a shaft for a horizontal band saw.

Made new Ladder Bar bushings and reworked the transmission x-member for 65 Mustang that was C4 swapped from a Liberty 4s...
09/21/2025

Made new Ladder Bar bushings and reworked the transmission x-member for 65 Mustang that was C4 swapped from a Liberty 4spd. Great feeling when customer text and says everything fit perfect.

The customer asked for two of these engagement pins to be made as soon as possible and requested six in total.
09/16/2025

The customer asked for two of these engagement pins to be made as soon as possible and requested six in total.

Had to rework these heads, removing .007 from the deck surface and completing a valve job.
09/15/2025

Had to rework these heads, removing .007 from the deck surface and completing a valve job.

Customer needed .250 milled off these brackets for an aftermarket roof rack.
09/02/2025

Customer needed .250 milled off these brackets for an aftermarket roof rack.

Customer needed the hole opened up to 1.375 for clearance and .750 milled of the step.
07/29/2025

Customer needed the hole opened up to 1.375 for clearance and .750 milled of the step.

Customer needed a .750 spacer to move his steering wheel on his street rod truck.
07/26/2025

Customer needed a .750 spacer to move his steering wheel on his street rod truck.

Address

Dalton City, IL
61925

Telephone

+12175218074

Website

Alerts

Be the first to know and let us send you an email when JTK Weld & Machine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category