Metal America - Building Project Consultant - Steven Wright

Metal America - Building Project Consultant - Steven Wright Metal America helps you plan and price garages, shops, RV covers, barns, barndominium shells, and commercial steel buildings.

See project options on our website or request a quote to start. https://metalamerica.my.site.com/mystore/ Metal America helps homeowners, ranchers, contractors, and business owners in DFW, Texas, and nearby markets plan garages, shops, RV covers, barns, barndominium shells, and small commercial steel buildings with clearer scope, factory pricing, permit help, and install coordination. Start on the

website, then use the request-a-quote page for the fastest structured next step. If you're already warm, DM your ZIP code, building type, target size, and site surface.

Permits stall good projects when packets miss basics. Core lesson: center the packet on engineered plans and a clear sit...
09/03/2026

Permits stall good projects when packets miss basics. Core lesson: center the packet on engineered plans and a clear site plan, not a generic kit drawing.

Dallas requires PE-sealed foundation/structural plans and a site plan for commercial new construction; Dallas and many North Central Texas cities operate under 2021 ICC codes with local amendments. TBPELS rules govern sealing procedures for Texas engineers. Expect site plan review per Dallas Code 51A-4.803/13.703.

Quick checklist:
- Ask your slab engineer about sealing requirements for your jurisdiction.
- Confirm site plan scale, north arrow, and utility notes match submittal format.
- Keep contractor, parcel, and address info consistent across sheets.



DM PERMIT PACKET for our one-page submittal index and a quick pre-check on your drawings.

Planning a small commercial metal building in Dallas? Core lesson: a permit-ready site plan must show fire access, hydra...
09/01/2026

Planning a small commercial metal building in Dallas? Core lesson: a permit-ready site plan must show fire access, hydrants, driveways/turning, and drainage—not just a floor plan. Reviewers kick back sets that miss these basics.

Quick checklist:
- Show compliant fire lanes and a turnaround sized for the apparatus.
- Locate hydrants and note distances to all exterior doors.
- Draw driveway widths/radii for truck entry and peak-hour turns.
- Indicate drainage arrows and positive slope away from the pad.

Permits and load requirements vary by location—always verify with your local building department.



DM SITE PLAN for our one-page Dallas fire-lane and site-plan pre-check before you submit.

Building a garage, carport, or small shop in DFW? Permits and setbacks decide where it can go and what plans you need. M...
08/09/2026

Building a garage, carport, or small shop in DFW? Permits and setbacks decide where it can go and what plans you need. Make quotes comparable by checking these first:

- City and zoning district (Dallas vs Fort Worth rules differ)
- Setbacks: Dallas notes many carports need 5' unless all-metal due to firewall separation
- Fort Worth: all carports need permits; any new or repair foundation needs a permit and engineered building plans
- Engineering: example threshold—Fort Worth commercial shells over 5,000 sf require sealed plans; residential accessories can still trigger engineered details (foundations/wind)

Permits and load requirements vary by location—verify with your local building department. DM “DFW checklist” and we’ll send a one‑page prep list with your city links, or include it with your quote.



DM “DFW checklist” for a one-page prep list, or request a quote and we’ll include it.

Two buildings can look similar and still price very differently. The usual reason is not footprint. It is the spec behin...
07/30/2026

Two buildings can look similar and still price very differently. The usual reason is not footprint. It is the spec behind the quote.

Before you compare numbers, confirm:
- wind and load assumptions
- whether the package is permit-ready
- if site plan review is part of the path
- what drawings are included
- what the quote excludes

Specs before price. That is how you avoid surprises later.

Call or form in a quote for a spec check.

If your build is near the coast or in a windstorm area, paperwork comes before price. A quote is not really comparable u...
07/30/2026

If your build is near the coast or in a windstorm area, paperwork comes before price. A quote is not really comparable until you know which code path applies and what the permit office wants in writing.

Check these before you order:
- which code edition your site falls under
- whether a WPI-1 or similar windstorm path applies
- if stamped drawings are required
- whether site plans or engineer seals are needed

Permits and load requirements vary by location - always verify with your local building department.

DM us your county and we’ll tell you what to verify first.

Planning big overhead or roll‑up doors in DFW? Inspections today follow 2021 codes, which tie your door’s design pressur...
07/20/2026

Planning big overhead or roll‑up doors in DFW? Inspections today follow 2021 codes, which tie your door’s design pressure (DP) to ASCE 7 wind speed and site exposure. Core lesson: match door DP to your site’s ASCE data before you order.

Quick checklist:
- Use your address to pull 3‑sec gust and exposure (ASCE Hazard Tool).
- Confirm enclosed vs partially enclosed classification on plans.
- Cross‑check door size against manufacturer DP tables (positive/negative PSF).
- Select the operator/hardware set rated for that DP.

Permits and load requirements vary by location—verify with your building department.



DM “Door Check” with your address and planned door sizes—we’ll run the ASCE lookup and send DP‑correct options.

07/19/2026

Spend The Footprint On Living

Use the shell for the rooms you need and keep covered outdoor space as a separate verified component. The square footage shown is the verified main-building footprint, before the attachment. Use the attached covered section for arrival, outdoor living, or a protected daily transition.

28x36x10 main building + 11x28x8 lean-to
IdeaRoom building price: $25,227.

Verified July 16, 2026 for delivery ZIP 78703. Taxes and the final site-specific quote are additional.

View the exact design: https://design.metalbuildingsnorthamerica.com/

Message your room, porch, storage, and ZIP requirements for a custom quote.

Building in DFW? Coastal windstorm rules don’t apply here, and code editions vary by city. Core lesson: confirm your cit...
07/18/2026

Building in DFW? Coastal windstorm rules don’t apply here, and code editions vary by city. Core lesson: confirm your city’s code edition and any PE‑seal triggers before you request quotes so loads, drawings, and timelines line up.

Quick checklist:
- Verify your jurisdiction with an address/parcel lookup.
- Check your city’s adopted code and amendments (e.g., Dallas lists 2021 IBC).
- Windstorm (2024 IBC/IRC effective 4/1/2026) is for TDI coastal counties—DFW is not in that zone.
- Share rough square footage to flag seal thresholds (e.g., Fort Worth requires a Texas PE over 5,000 sf).



DM “DFW Code Check” with your address and rough SF—I’ll confirm code edition and seal triggers before you get quotes.

Finish warranties don’t cover every kind of rust or staining. Install details and cleanup determine coverage.Confirm the...
07/14/2026

Finish warranties don’t cover every kind of rust or staining. Install details and cleanup determine coverage.

Confirm these in your quote:
- Keep panel edges off wet/green concrete—contact can void finish coverage.
- Protect cut edges and remove all metal shavings; leftover swarf causes rust spots that aren’t covered.
- Keep corrosives away (animal waste, fertilizers, harsh chemicals).

CTA: DM “warranty” and we’ll share our base‑trim stand‑off and cleanup checklist so you know what’s included.

Address

Dallas, TX

Telephone

+18172077007

Website

Alerts

Be the first to know and let us send you an email when Metal America - Building Project Consultant - Steven Wright posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Metal America - Building Project Consultant - Steven Wright:

Shortcuts

Share

Category