USA Diesel

04/23/2024

We love hearing from happy customers! 🤩 Thank you for the kind words Chris. We hope to see your truck on the road for years to come!

"Return customer here. Ed and the gang are awesome to work with and are why I keep coming back. The amount of technical knowledge they have and are willing to openly share helps me keep the old Ford on the road. Recently did the Atlas 40 FICM and love the results. Better running and more efficient truck!" ~ Chris

04/22/2024

What do you do when your low pressure oil gauge says 'CHECK GAUGES' and you see that you have no indicated low pressure oil on a Powerstroke 6.0? Check out our video to learn more! 👉https://ow.ly/F3Py50RlxWs

What to do when your low pressure oil gauge says 'CHECK GAUGES' and you see that you have no indicated low pressure oil.Here are some parts mentioned in the ...

04/20/2024

Got a dirty EGR valve? Taking time to clean it will ensure a smoother running truck!

- Remove the two screws holding it in & disconnect the electrical wires to it.
- Rotate the valve to expose the mounting flanges.
- Install a wire loop to connect the two flanges over the top of the module (leaving a loop that sits a few inches above the valve)and use the alternator as a lever in conjunction with a pry bar or long screwdriver to pop the valve up and out.
- Clean up the (hopefully dry) gunk that you find.
- Carefully inspect the two seals for damage, ensure that the valve moves as it's supposed to, and reinstall it.
Looking for more information? Check out our site! https://ow.ly/2axW50QgtGV

04/19/2024

Not only do we love helping folks across the country get the best parts and FICM/ECM repair for their trucks, we are pretty much obsessed with our own trucks too! Check out the latest fun project happening for our very own Founder, Ed's 2005 Excursion! One of our team members, Paul, built a custom engine and is preparing to install it this week. So cool! 🙌😎

04/18/2024

Innovative Performance Research is the first to develop the only 100% inline stainless steel coolant filter in the industry. This filter is the only one the in the market that can be used as a full flow filter, allowing you to install it inline on the OEM oil cooler housing with the coolant manifold, capable of filtering 100% of the coolant that runs through the OEM oil cooler. This method is the most effiecient.
✅ The stainless filter can be fully disassembled and washed with any conventional degreaser or solvent.
✅ The filter element is stainless steel and features a magnet on the bottom to attract metallic particles such as corroded cast iron that separate from the engine block after years of service.
✅ This High Flow Coolant Filter is much more effective because it uses 3/4" hoses and fittings.
✅ Other manufacturer's kits use only small 1/4 or 3/8 heater hose.
✅ IPR's High Flow Coolant Filtration out flows anything in the market by 83%!

👉SHOP OUR SELECTION HERE: https://ow.ly/RyYo50Rjf8Z
👉CALL US at 515-897-4459

04/16/2024

Your transmission is what delivers all that torque and horsepower to the pavement. If you're starting to see the dreaded 3-5 shift flare, getting high on the odometer, towing heavy, pushing heavy horsepower or just wanting to proactively protect your investment, our 5R110 transmission upgrade kit provides a very solid solution. You can even custom build your kit! Get yours here>> or call us at 515-897-4459!

04/12/2024

Monster-Ram improves airflow from the intercooler. Flows 906 cfm (69.22 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). Raises boost without increasing backpressure at the turbine. Result: a more responsive, power efficient engine. Up to four 1/8 inch NPT ports for flexibility! The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass while preventing wall wetting. Accommodates stock mounting points including temperature and pressure sensors, wire harness and dipstick tube. It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine.

Banks Monster-Ram¬ Intake System 3.5-inch with Fuel Line for 2007.5-2018 6.7 Cummins 42788-PC
🔥 Improves airflow from the intercooler
🔥 Raises boost without increasing turbine drive pressure
🔥 Larger and less restrictive than stock intake
🔥 Improves flow of oxygen-rich air into cylinders
🔥 Quicker throttle response
🔥 Outflows stock over 109 percent
🔥 3.5 inch CNC machined inlet
🔥 Four 1/8 inch NPT ports (Top ports targeted for optimal atomization of Straight-Shot water-methanol)
🔥 Accommodates stock mounting points

Order here 👉https://ow.ly/sYae50RexAm
or call us at 515-897-4459!

04/10/2024

It's National Pet Day and at USA Diesel/FICM Repair, we love our furry, feathered and finned friends! Drop a photo of your pet in the comments and make our day!

04/06/2024

So great to meet Enrique with True Spike Lug Nuts at the Florida Truck Meet! Our very own USA Diesel monster truck features their ! 🙌