Pertech-LLC

Pertech-LLC Located in Mid-Missouri we have been providing engineering solutions for the area for over 20 years.

A look at one of our production runs in progress 🔧While custom projects often get the spotlight, a big part of what we d...
06/16/2026

A look at one of our production runs in progress 🔧

While custom projects often get the spotlight, a big part of what we do is producing quality parts consistently and efficiently.

Every part in this tote represents the same goal—making sure each part is built to the same standard from the first piece to the last.

Whether it’s a single custom component or a large production run, we take pride in delivering quality work every time.

A look at what’s moving through the shop this week 🔧From fabrication work to control panel installs, we’ve got a mix of ...
06/06/2026

A look at what’s moving through the shop this week 🔧
From fabrication work to control panel installs, we’ve got a mix of projects in progress right now.
Every job is a little different, but the goal is always the same—build it right and make sure it performs the way it’s supposed to.
More to come as these projects come together.

Sometimes the best investment isn’t new equipment—it’s improving what you already have.We built a set of custom fixtures...
05/29/2026

Sometimes the best investment isn’t new equipment—it’s improving what you already have.
We built a set of custom fixtures to replace worn-out units that were slowing things down and affecting consistency.
With updated fixtures, the customer now has:
âś” Better repeatability
âś” Improved efficiency
âś” Longer service life
Small upgrades like this can make a big difference in day-to-day operations.
If you’ve got tooling or fixtures that aren’t performing like they used to, it might be time for an upgrade.
Send us a message—we’d be glad to take a look.

Not every job fits on a small machine.We regularly handle large parts that require the right equipment, the right setup,...
05/16/2026

Not every job fits on a small machine.
We regularly handle large parts that require the right equipment, the right setup, and attention to detail to get it done right.
Whether it’s big plates, heavy components, or custom work—this is the kind of work we’re set up for.
If you’ve got something too big for most shops, it’s probably right in our wheelhouse.
Send us a message—we’d be glad to take a look.

We recently helped a customer upgrade an older linear motion system that had been in service for years and was starting ...
05/08/2026

We recently helped a customer upgrade an older linear motion system that had been in service for years and was starting to show its age.
The old setup was limiting performance and creating reliability concerns — so it was time for an upgrade.
➡️ We installed a new Rexroth linear system designed for smoother operation, better precision, and long-term durability.
Check out the difference 👇
The result:
âś… More consistent performance
âś… Increased reliability
âś… Less downtime and maintenance
Projects like this are all about helping our customers keep things running efficiently and avoid costly disruptions.
If you’ve got equipment that’s overdue for an upgrade, we’d be happy to take a look.

A customer came to us needing more flexibility out of their conveyor system.Their setup didn’t allow them to easily chan...
05/01/2026

A customer came to us needing more flexibility out of their conveyor system.
Their setup didn’t allow them to easily change how product was routed, which slowed things down and limited how they could run.
We built custom removable diverter arms so they can quickly switch configurations and keep things moving efficiently.
Simple upgrade—but it makes a big difference in day-to-day operation.
If you’re working around equipment limitations, it might be time to fix the root of the problem. Send us a message and we’ll take a look.

Not everything looks pretty during the process… and that’s where the real work gets done 🔧This is a look at one of our b...
04/24/2026

Not everything looks pretty during the process… and that’s where the real work gets done 🔧
This is a look at one of our builds mid-progress—fitting, fabricating, and dialing everything in before it ever gets finished and painted.
It might not look like much yet, but this stage is what makes the difference between something that just looks good and something that actually holds up in the field.
We take pride in doing it right from the ground up.
Got a piece of equipment that needs built or rebuilt? Send us a message—we’d be glad to take a look.

From worn-out to work-ready đź’ŞThis piece of equipment came to us heavily rusted, weathered, and worn down from years of h...
04/19/2026

From worn-out to work-ready đź’Ş

This piece of equipment came to us heavily rusted, weathered, and worn down from years of hard use. With the right process—cleaning, repair, fabrication, and a full refinish—we brought it back to life.

At Pertech, we don’t just build new… we restore and extend the life of your existing equipment, saving you time and money while getting you back up and running.

If you’ve got equipment that looks like the “before,” don’t write it off just yet. Let’s talk about what it could look like after.

đź“© Reach out to get a quote or discuss your next project.

#2001
09/11/2023

#2001

#2023
09/04/2023

#2023

Address

51 N RANGELINE Road
Columbia, MO
65201

Opening Hours

Monday 7am - 3:30pm
Tuesday 7am - 3:30pm
Wednesday 7am - 3:30pm
Thursday 7am - 3:30pm
Friday 7am - 3:30pm

Telephone

(573) 303-3737

Website

Alerts

Be the first to know and let us send you an email when Pertech-LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pertech-LLC:

Shortcuts

Share

Category