S.A. Dygert's

S.A. Dygert's S.A. Dygert's specializes in construction and agricultural parts. We are an individually owned and operated company based in upstate New York.

Originally founded in 1989 as a repair facility for heavy equipment only. Since that time we have expanded our services to include farm equipment repair, welding & fabricating and machine shop service. In 2000 we began selling new aftermarket parts and are an authorized dealer for A&I Products, a large aftermarket supplier. In March of 2008 we teamed up with Value Part, a leading aftermarket under

carriage supplier. With our aftermarket parts we offer a low cost alternative to OEM with the same quality. Our service department is dedicated to providing our customers with expert repair for all types of farm and heavy equipment. In our machine shop we are able to manufacture or repair some parts that are not yet available on the aftermarket and which are too costly through OEM.

G9-43A SkyTrak hose replacement inside boom.
05/21/2026

G9-43A SkyTrak hose replacement inside boom.

05/19/2026

Minor leak needing repair on this G9-43A SkyTrak

924G is next on deck for a complete service and possible repairs. Subject to a good looking over.
05/13/2026

924G is next on deck for a complete service and possible repairs. Subject to a good looking over.

Caterpillar IT28-G in for complete service as well as a few minor repairs.
05/13/2026

Caterpillar IT28-G in for complete service as well as a few minor repairs.

Kubota KX080 wiring repair. Roughly 6 wires spliced, soldered and shrink tubed for Sperryco.com.
05/11/2026

Kubota KX080 wiring repair. Roughly 6 wires spliced, soldered and shrink tubed for Sperryco.com.

Here’s a few pictures of the extend/retract cylinder re-seal on the JLG 944. Just over 15’ long.
04/23/2026

Here’s a few pictures of the extend/retract cylinder re-seal on the JLG 944. Just over 15’ long.

Currently in the shop, a JLG 944E-42 telehandler. This unit is getting a full service, boom wear pads, boom extend/retra...
04/15/2026

Currently in the shop, a JLG 944E-42 telehandler. This unit is getting a full service, boom wear pads, boom extend/retract cylinder re-seal and possible brake work. In addition to that, we need to diagnose a no heat issue and an inoperable engine temperature gauge.

Valve cover replacement on Cummins QSF 3.8 in a JLG 8042 telehandler. Wonderful access.
04/15/2026

Valve cover replacement on Cummins QSF 3.8 in a JLG 8042 telehandler. Wonderful access.

Up next…Rex SP700 vibratory roller. Customer complaint, sluggish reverse. Especially after warm. Stay tuned.Update: Prob...
03/16/2026

Up next…Rex SP700 vibratory roller. Customer complaint, sluggish reverse. Especially after warm. Stay tuned.

Update: Problem found to be 2 O-rings blown out under control valve. This was caused by a previous installation of 2 gaskets between control valve and pump body. Thus, not allowing the needed "crush" on the O-rings.

A quick job we recently did for a customer and friend. Oversize the holes in some hub pilot wheel hubs to facilitate the...
03/13/2026

A quick job we recently did for a customer and friend. Oversize the holes in some hub pilot wheel hubs to facilitate the use of the next size larger wheel studs.

Address

6699 State Route 31
Cicero, NY
13039

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Friday 7:30am - 4:30pm
Saturday 8am - 12pm

Telephone

+13155594992

Website

Alerts

Be the first to know and let us send you an email when S.A. Dygert's posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category