Logicbus Inc

Logicbus Inc Logicbus is a well-established company, founded in October 2001, being the representative in United S https://blog.logicbus.com/

06/23/2026

Why replace an expensive field instrument when you can just translate its data? 🛑🔌

Change the protocol. Not the instrument. That is the definition of smart modernization.

When upgrading PLCs or SCADA systems, integrating legacy HART devices can be a massive headache. The HRT-710 Modbus to HART gateway allows you to bridge that communication gap without the heavy capital expenditure of replacing functional field hardware.

Why integrators choose the HRT-710:
✔️ Universal Connectivity: Flawless Modbus RTU to HART conversion via RS-232/485/422.
✔️ High Capacity: Supports up to 16 HART commands simultaneously for deep data access.
✔️ Industrial Design: 24VDC operation and easy DIN rail mounting directly in your control cabinet.

Lower your integration costs and keep your proven field devices online.

🔗 Check the full datasheet and grab your HRT-710 here: https://www.logicbus.com/HRT-710_p_1523.html

Stop replacing broken office keyboards on your factory floor. 🛑⌨️Standard keyboards cannot survive the dust, spills, and...
06/19/2026

Stop replacing broken office keyboards on your factory floor. 🛑⌨️

Standard keyboards cannot survive the dust, spills, and heavy use of a manufacturing environment. Every broken peripheral means unnecessary downtime for your operators.

Equip your HMI stations with the D-8605B Industrial Keyboard:
✔️ Resistant to dust, moisture, and industrial conditions.
✔️ Designed for long-term, continuous operation.
✔️ Drastically reduces maintenance and hardware replacements.

Because industrial environments require industrial-grade devices.

🔗 Check the specs and upgrade your hardware here: https://www.logicbus.com/D-8605B_p_31163.html

Your process is generating valuable force data every second. However, traditional force measurement systems often requir...
06/17/2026

Your process is generating valuable force data every second. However, traditional force measurement systems often require amplifiers, dedicated DAQ hardware, complex wiring, and lengthy setup times.

The FUTEK USB220 eliminates complex signal conditioning and accelerates data acquisition by connecting force sensors directly to your computer.

With the USB220, you can simplify data acquisition and get:

Direct USB connectivity

Real-time force measurement

Plug-and-play operation

Faster testing and validation workflows

Built for modern industrial applications, the USB220 transforms raw sensor signals into data engineers can immediately visualize, record, and analyze. Spend less time configuring hardware and more time analyzing results.

Swipe through the carousel to see how you can go from sensor to software in real time.

06/17/2026

How much money are you losing on blind downtime from your remote assets? 💸📉

When a remote pumping station or isolated generator fails, the cost isn't just the repair—it's the travel time, the delayed response, and the lost production.

The SENECA Z-LTE-WW transforms how you manage distributed assets. By providing secure, high-speed LTE connectivity, this IIoT gateway pushes your critical machine data directly to your SCADA or Cloud platform from anywhere in the world.

Operational Advantages:
🔹 True Predictive Maintenance: Monitor vibration, temperature, and power consumption remotely to predict failures.
🔹 Eliminate Unnecessary Site Visits: Diagnose faults and read PLC data without dispatching a truck.
🔹 Seamless IT/OT Convergence: Easily bridge industrial protocols (Modbus) to IT standards (MQTT/HTTP) with built-in VPN security.

Stop treating remote locations as black boxes. Gain total visibility of your entire operation today.

🔗 Speak with one of our engineers and view the Z-LTE-WW specs here: https://www.logicbus.com/Z-LTE-WW_p_30418.html

Connecting strain gauges directly to a PLC over long distances is a recipe for EMI noise and ground loops.The SENECA Z-S...
06/12/2026

Connecting strain gauges directly to a PLC over long distances is a recipe for EMI noise and ground loops.

The SENECA Z-SG signal conditioner delivers rock-solid data to your control systems by eliminating interference right at the source:

🔹 Signal Conversion: Translates low-level mV into stable 4–20 mA, 0–10V, or Modbus RTU.
🔹 1,500 Vac Isolation: Actively protects your PLC/SCADA I/O cards from transients.
🔹 Smart Filtering: Built-in digital filters eliminate fluctuations caused by mechanical vibrations (like hoppers or mixers).

🔗 Protect your process and check the specs here: https://www.logicbus.com/Z-SG_p_4195.html

06/12/2026

How much time are your technicians wasting wiring pushbuttons and pilot lights? ⏱️📉

Moving from traditional hardwired panels to a modern HMI is a game-changer for OEMs and system integrators. Physical buttons limit your machine's capabilities and make troubleshooting a nightmare of traced wires.

The P2070NA HMI transforms your operator stations:
🔹 Drastically reduces assembly time: Eliminate complex point-to-point wiring.
🔹 Empowers the operator: Real-time process visualization and intuitive graphics.
🔹 Simplifies troubleshooting: Instant, plain-text alarms and fault diagnostics.
🔹 Future-proofs your design: Add new controls via software without drilling new holes in the cabinet.

Modernize your control systems and lower your integration costs.

🔗 Grab the P2070NA for your next project here: https://www.logicbus.com/p2070na

06/11/2026

How much money have you wasted replacing perfectly good sensors?

You changed the load cell three times, but the readings are still unstable. The truth is, your sensor isn't failing, your signal is.

Industrial environments are full of electrical noise that destroys raw analog data. The FUTEK IAA200 Signal Amplifier stabilizes and boosts that signal, ensuring your PLC gets reliable measurements every single time.

Stop treating the symptoms. Amplify your signal, eliminate false alarms, and reduce unnecessary downtime.

🔗 Learn how to condition your signals properly and grab the IAA200 here: https://www.logicbus.com/FSH03863_p_11841.html

You replaced the sensor 3 times. The problem was never the sensor. 🛑VFDs, electric motors, and long cables generate elec...
06/10/2026

You replaced the sensor 3 times. The problem was never the sensor. 🛑

VFDs, electric motors, and long cables generate electrical noise that corrupts your data before it even reaches the PLC. The result? Unstable readings and false alarms.

Stop replacing good hardware. The FUTEK IAA100 Signal Amplifier shields and strengthens your analog signals directly from the control panel:

✔️ Clean output: Configurable ±5 or ±10 VDC.
✔️ High-speed: 25 kHz bandwidth.
✔️ Easy install: DIN-rail mount with removable terminals.

Swipe to see how to protect your instrumentation and get reliable data. 👉

🔗 Grab the datasheet and upgrade your architecture here: https://www.logicbus.com/FSH03863_p_11841.html

06/09/2026

Stop wasting integration time wiring your HMI to your PLC.

For OEMs and panel builders, minimizing hardware footprint and reducing communication wiring is critical. The "all-in-one" industrial architecture solves this instantly.

The FATEK P2070NA puts a powerful PLC and a high-resolution HMI in the exact same box. Connect your sensors and actuators directly to the unit and start controlling your process.

🔹 7" TFT LCD (16.7M colors) for clear visualization.
🔹 800x480 resolution with 400 nits LED backlight.
🔹 Industrial 4-wire resistive touch.
🔹 128M Flash memory.

Automate and visualize your machine from one central hub.

🔗 Secure your hardware with Logicbus USA today: https://www.logicbus.com/p2070na

06/05/2026

The hidden cost of your cold chain: Blind Spots. 📉❄️

If your quality control team is still walking around downloading data manually from individual loggers, your operation is exposed. A delay in data retrieval means a delay in spotting a temperature excursion.

Upgrade to a fully automated architecture with the MadgeTech RFRHTemp2000A wireless data logger.

🔹 Real-Time Reaction: Get SMS and email alerts immediately if parameters are breached.
🔹 Uncompromised Accuracy: External RTD sensor for ultra-fast response times.
🔹 Audit-Ready: ISO 17025 certified out of the box, and fully FDA 21 CFR Part 11 compliant via MadgeTech 4 software.

Stop reacting to product loss. Prevent it with wireless continuous monitoring.

🔗 Build your wireless network today: https://www.logicbus.com/RFRHTEMP2000A_p_6664.html

Address

863 Bowsprit Road
Chula Vista, CA
91914

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm
Saturday 10am - 1pm

Website

Alerts

Be the first to know and let us send you an email when Logicbus Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category