On Site Machine Works

On Site Machine Works Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from On Site Machine Works, Machine Shop, 3775 W Highway 166, Carrollton, GA.

Sometimes you find this when opening a 55 year old gearbox. A few shafts and a couple gears it'll work good as new.
11/29/2025

Sometimes you find this when opening a 55 year old gearbox. A few shafts and a couple gears it'll work good as new.

Looking at the test dates on one of our gas cylinders. Oldest was 4-47 (April 1947) and thought about what this old cyli...
04/23/2021

Looking at the test dates on one of our gas cylinders. Oldest was 4-47 (April 1947) and thought about what this old cylinder has seen through the years, especially considering the rather lax safety rules and regulations back in the day.

01/30/2021

Testing our new laser engraving machine

Another product of what happens when a mechanic uses the power of Thor's mighty hammer. This slip fit shaft was beaten a...
07/24/2020

Another product of what happens when a mechanic uses the power of Thor's mighty hammer. This slip fit shaft was beaten and mushroomed to the point that the end is almost 1/8" larger than the shaft itself.

Gearbox secrets revealed: You can still see the snap ring groove on this shaft, just above the bearings. However due to ...
07/16/2020

Gearbox secrets revealed:
You can still see the snap ring groove on this shaft, just above the bearings. However due to the vigorous hammering during the installation process, there's no way those bearings are coming off without removing material first.

TBT circa 2011...Here's a project we did for a major sports drink bottler...these sliding machine guard panels were over...
07/09/2020

TBT circa 2011...
Here's a project we did for a major sports drink bottler...these sliding machine guard panels were over $10K each from Germany, and it takes 3 to do one side of a machine. We took them right out of the crate they came in and cut off the tracks and installed our own design carriers. The customer insisted that we do this based on our earlier repairs of their damaged doors.

Mailbox back up again... maybe three's a charm 😁
07/02/2020

Mailbox back up again... maybe three's a charm 😁

A customer just picked up the world's first 6.5 turbo diesel powered M114 and it has arrived safely at it's Midwestern h...
06/27/2020

A customer just picked up the world's first 6.5 turbo diesel powered M114 and it has arrived safely at it's Midwestern home.

This machine lifts and dispenses rolls of paper in excess of 4000lbs at high rates of speed. The original redesign exper...
05/08/2020

This machine lifts and dispenses rolls of paper in excess of 4000lbs at high rates of speed. The original redesign experienced frequent breakdowns from broken shafts, chains or worn sprockets..."frequent" meaning as much as 50 times a year. Our redesign with the elimination of chains and sprockets along with the weak (undersized) chuck shaft should virtually eliminate their downtime related to the failures referenced.

That bolt isn't bent, the hole is drilled and tapped that way. Seems like folks these days will believe anything... well...
05/07/2020

That bolt isn't bent, the hole is drilled and tapped that way. Seems like folks these days will believe anything... well maybe anything except "good ain't cheap and cheap ain't good"

Address

3775 W Highway 166
Carrollton, GA
30117

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 6pm
Sunday 8am - 6pm

Website

Alerts

Be the first to know and let us send you an email when On Site Machine Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to On Site Machine Works:

Shortcuts

Share

Category