Flow Logic

09/27/2026

What happens to the fuel signal and jet needs when running restrictor plates on AKRA, NKA, or WKA box stock carburetors??

Same carb. Same jet, only the plate changes. 👀

Plate | Signal (H2O) | CFM
🔴 Red | 1.6” | 10.68 CFM
🟢 Green | 2.7” | 13.53 CFM
🟣 Purple | 5.0" | 19.0 CFM
🔵 Blue | 7.2” | 23.1 CFM
🚫 None |24.9” | 42.5 CFM

🔥We ran the numbers and found the real reason plate engines need a bigger jet…and it’s not what you think…

📖 Full breakdown on the Flow Logic Laboratory blog: link in comments.

09/26/2026

🏁 Flow Logic's new website is officially LIVE! 🏁

👉 Shop now: https://flowbenchlogic.com

Everything we build is now in one place:
🔧 Flow Bench development information
🔧 Racing carburetors for various classes

No math, no guesswork — just plug in and flow.

Have a question? Comment below or message us anytime. Thanks to everyone who's supported us so far!

Precision flow benches for small engine enthusiasts — no math, just plug in and flow. Proudly built in Arkansas by Flow Logic LLC.

09/07/2026

🔥Carb comparison between AKRA stock and MARS Pro Stock!

🟰Both carbs have .615 Venturi and .750 throttle bore. Pro Stock is not AKRA legal and considered a cheater carb that will make considerable more power than AKRA legal.

AKRA Stock 💨 42.2 CFM
MARS Pro Stock 💨 57.9 CFM

09/07/2026

Flowbench update!!

💨 Accuracy and Precision is within 1%
⚡️ 120 volt standard power
📶 90 CFM at 28” flow capacity

Let me know in the comments if you want to see additional features!!

Stop guessing, start flowing…

08/31/2026

Flowbench mount for Predator 212 head…things about to get interesting!!

08/31/2026

What to build?? A Pro Stock, Red, Green, or Blue plate. I can’t decide!! What ever it is pretty sure it is gonna flow the MAX!!

08/30/2026

Fresh batch of MARS Jr carbs headed to Black Flag Karts n Parts tomorrow!! I see builders use stock carbs on their MARS engine builds…watch and see how much flow you are missing!!

💨 More air in….equals
🏇 More horsepower to the track!!

05/03/2026

💨How many CFM can you squeeze through a .615 Venturi carburetor??

👀Watch to find out!!!

05/01/2026

Flow Logic Carburetor Jet Calculator

Prototype here shrinking it down to pocket size in the future!!

Another project I have been working on in addition to the Flow Bench.

I will be at Jonesboro Karting Complex tomorrow and will have it set up if you are curious about air density and the effect it has on carburetor jetting!!

04/25/2026

Ever wonder what happens when you run with the bottom O-ring off the low jet on AKRA carbs?

Watch to find out.