Against The Grain Industries

07/26/2026

‼️BIG NEWS FOR AG INDUSTRIES‼️

We are now mobile!!

Same durability. Same craftsmanship. Same dedication.
Now delivered to your doorstep.

07/26/2026

Check this out! Track torch making quick work cutting some plates for the boiler build!

07/21/2026

Working on the next boiler for a customer. Here is the firebox so far. 36”x50” 5/16” thick. Coming along real nice…When completed this one will hold around 400 gallons of water.
🔥Heating approximately 10,000 sq ft or 360,000 btu!!

06/18/2026

Here is a nice sauna stove recently completed for a customer. This one is made to load from outside the sauna so we fabbed a collar to keep the walls away from the heat. Built all out of 1/4” steel. Turned out really good and will last a life time!!

05/16/2026

Just delivered the latest boiler build to a very happy customer to heat his shop!! Onto the next one…Stay tuned and reach out if you have a project or repair needed!

04/19/2026

Check out this door latch design for the latest wood boiler build!! Got it working perfect…now that I have the design figured out, I will add one more catch for the latch and clean it up a bit 🤌

04/05/2026

Check out the new tool in the shop!! Swag off road 50” finger brake!! Almost complete needing some hoses for the cylinders and some gussets. Then ready to bend some plate! We will be able to bend 1/4” plate 4’ wide, going speed things up and be a huge game changer for us!!

Shout out to Swag Off Road for taking care of us and of course sending us some cool wearable swag 👏🏻

03/30/2026

Hey everyone, here is an update on the latest boiler project. It’s been pressure checked @ about 7 psi for 3 days. Wrapping things up by mounting the door, wiring, insulation and some sheet metal work to get it out the door! Then on to the next one! Check us out Against The Grain Industries to schedule your project!!

02/24/2026

02/24/2026

Hey everyone, another progress update on the little boiler that could…the rear water jacket panel fittings are welded in. (Everything gets welded on both sides). Two - one inch supply lines on bottom and two return lines on top with return pipes inside the water jacket to dump the cool water towards the front of the boiler forcing it to circulate and mix the water more efficiently. One - two inch drain. The offset 3/4” b**g is for the aqua-stat which will monitor water temp and control when the damper opens and fan kicks on etc…

Next is to finish welding up the back panel to seal up the water jacket and pressure test this thing…after testing, onto the finish work! Stay tuned, more to come!