3D Scan OC

07/25/2023

3D scanning a BMW E46 for Arcade Ultra Design product development

3D Scan OC can scan all shapes and sizes and can be mobile to anywhere in and out of state for your larger projects.

Send a message to learn more

04/26/2022

! Swipe to see it all. Soon after the last FoosGoneWild project was asked if a beer tap handle could be designed, 3D printed, painted and assembled in a week or less for the release of the new PISTO beer.

A quick 2D drawing was provided to be used as a reference and work immediately began on the design and 3D printing. Followed by that was sanding, body filling, painting and assembly.

The logo that was designed and had to be carefully painted by hand.

After that was all done a threaded stud and the metal beer tap adapter was installed and this beer tap was good to go a day earlier than the requested date of completion. 🥳🍻

12/03/2021

PolyMide PA6-GF is no problem at all on the inhouse 2x4.

PolyMide PA6-GF is super strong, dissipates heat really well and sands very very well! A great choice for end-use parts or for making plugs as this will hold up to the composites mold making process.

With a print volume of 1400mm x 605mm x 800mm, 3D Scan OC can print LARGE PA6-GF parts.

Feel free to send a message, email or call for more information about getting your parts made OR for additional information on the MAKEiT 2x4.

|