The Great Chainsaw Revival LLC

The Great Chainsaw Revival LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from The Great Chainsaw Revival LLC, Boise, ID.

Hello everyone, I’m gearing up for spring and ordered over 200 ft of bulk Oregon chain in 3/8” x .050” both full skip 72...
03/21/2018

Hello everyone, I’m gearing up for spring and ordered over 200 ft of bulk Oregon chain in 3/8” x .050” both full skip 72jgx and full comp. 72lgx. A 20”chain, or a 72 drive link chain will run $23.00 a 24” chain, or an 84 drive link chain for $25.50 and up from there.i can make any chain in 3/8” .050” from a 16” bar all the way up to 35”plus. Call me for pricing today! I can also order any Oregon chain and have it here in two days! Shipping is extra.

Hello everyone, I’m gearing up for spring and ordered over 200 ft of bulk Oregon chain in 3/8” x .050” both full skip 72jgx and full comp. 72lgx. A 20”chain, or a 72 drive link chain will run $23.0…

Hello everyone,I’m gearing up for spring and ordered over 200 ft of bulk Oregon chain in 3/8” x .050” both full skip 72j...
03/21/2018

Hello everyone,

I’m gearing up for spring and ordered over 200 ft of bulk Oregon chain in 3/8” x .050” both full skip 72jgx and full comp. 72lgx. A 20”chain, or a 72 drive link chain will run $23.00 a 24” chain, or an 84 drive link chain for $25.50 and up from there.i can make any chain in 3/8” .050” from a 16” bar all the way up to 35”plus. Call me for pricing today!

I can also order any Oregon chain and have it here in two days! Shipping is extra.

This week on what’s on my bench!Well it’s been awhile since I have put a what’s on my bench up. It’s been pretty hectic ...
02/12/2018

This week on what’s on my bench!

Well it’s been awhile since I have put a what’s on my bench up. It’s been pretty hectic around the house and shop but here goes nothing!

I was given a nice old craftsman 50 cc 2 stroke rototiller for free the other day. All it really needed was a carb cleaning and a new fuel line and she is ready to go. I took her out in the dirt and let her dig and she does a pretty good job! It’s not much of a post but it’s a re start of sorts for “what’s on my bench”

I may be putting her up for sale soon so if anyone is interested please contact me through Facebook or call 208-596-0714.

Thanks!
Andy
TGCR

12/07/2017

Hello everyone, firewood season may be slowing a bit because of the cold weather but snow is right around the corner! Don’t wait to schedule your appointment for a preseason snowblower tune up until the last minute! I have appointments open the rest of this week and some next week!

I am also running a 20% off new customer special all of December towards any parts and services the whole month. So get your appointment today and mention the Facebook December promotion to get your 20% off.

We also offer winterization on all your small engines and chainsaws as well. Call, message or email me today for your appointment!

Thanks,
Andy
TGCR

Today TGCR is proud to announce that we now have professional chain saw sharpening as one of our services! i recently bo...
11/07/2017

Today TGCR is proud to announce that we now have professional chain saw sharpening as one of our services! i recently bought a new Oregon professional chain sharpener and am now taking chains in to sharpen. Up to 84 links is $8.00 and anything above 84 links is $11.00 and can be done the same day. We we also got a nice shiny new roll of Oregon 72 lgx full comp chain Ins 3/8 .050” to build your custom chain to fit your needs. [ 42 more words ]

Today TGCR is proud to announce that we now have professional chain saw sharpening as one of our services! i recently bought a new Oregon professional chain sharpener and am now taking chains in to…

Today TGCR is proud to announce that we now have professional chain saw sharpening as one of our services!i recently bou...
11/07/2017

Today TGCR is proud to announce that we now have professional chain saw sharpening as one of our services!
i recently bought a new Oregon professional chain sharpener and am now taking chains in to sharpen. Up to 84 links is $8.00 and anything above 84 links is $11.00 and can be done the same day.

We we also got a nice shiny new roll of Oregon 72 lgx full comp chain Ins 3/8 .050” to build your custom chain to fit your needs. We can also order in any chain you need and have it in 3 business days. A 60 link chain starts at $20.00 and it goes up from there. For example: a 114 link 72lgx 3/8 .050 chain will run $34.00 and can be built in one business day.

This week on what’s on my bench!!! I decided to accessorize..... my Chainsaw! I did not have a set of bumper spikes for ...
10/22/2017

This week on what’s on my bench!!! I decided to accessorize..... my Chainsaw! I did not have a set of bumper spikes for the dolmar 120si so I made a set. All be it a little ridiculous but they are bad ass!!! I can make any set of custom spikes for any saw that has them too. If you are interested pm, call, text or come by to my shop! Without further ado....

This week on what’s on my bench!!! I decided to accessorize….. my Chainsaw! I did not have a set of bumper spikes for the dolmar 120si so I made a set. All be it a little ridiculous but they …

This week on what’s on my bench!!! I decided to accessorize..... my Chainsaw! I did not have a set of bumper spikes for ...
10/22/2017

This week on what’s on my bench!!! I decided to accessorize..... my Chainsaw! I did not have a set of bumper spikes for the dolmar 120si so I made a set. All be it a little ridiculous but they are bad ass!!! I can make any set of custom spikes for any saw that has them too. If you are interested pm, call, text or come by to my shop! Without further ado....

The temperature is dropping and that means the leaves are dropping! Remember to tune up your leaf blowers before the lea...
10/12/2017

The temperature is dropping and that means the leaves are dropping! Remember to tune up your leaf blowers before the leaves hit the ground! Leaf blower and back pack blower tune ups start at $45.00 plus parts! And if you schedule your appointment before October 26th I'll knock 20% off the total price!

I also do winterizations on all your spring and fall machinery such as chainsaws, trimmers mowers as well as blowers! Get your tune up and winterizations before it too late!

Remember 20% off on blower tune ups and chainsaw trimmer mower and blower winterizations as well!

Thanks,

Andy
TGCR

This weeks what's on my bench is a husqvarna t540 xt top handle saw. This thing pulled over very easily and would not st...
10/10/2017

This weeks what's on my bench is a husqvarna t540 xt top handle saw. This thing pulled over very easily and would not stay running. I did a quick compression test and came up with 80 psi compression on 5 pulls. I tore down the saw and found that the sealing ring has Small pits in the sealing face with no cylinder damage which is very weird and the carb diaphragm is stiff. [ 42 more words ]

This weeks what’s on my bench is a husqvarna t540 xt top handle saw. This thing pulled over very easily and would not stay running. I did a quick compression test and came up with 80 psi comp…

This weeks  what's on my bench is a husqvarna t540 x2 top handle saw. This thing pulled over very easily and would not s...
10/10/2017

This weeks what's on my bench is a husqvarna t540 x2 top handle saw. This thing pulled over very easily and would not stay running. I did a quick compression test and came up with 80 psi compression on 5 pulls. I tore down the saw and found that the sealing ring has Small pits in the sealing face and the carb diaphragm is stiff. I tore down the saw and found that the sealing ring has Small pits in the sealing face with no cylinder damage which is very weird and the carb diaphragm is stiff. So this saw is getting a new sealing ring, crank seals intake diaphragm carb kit and fuel lines as well as a minor tune. This saw is now waiting for parts. I'll update the progress next week. Thanks and enjoy!

Andy
TGCR

This weeks what's on my bench is the Vermeer  sc252 stump grinder. I have finished The tune up and oil change as well as...
10/08/2017

This weeks what's on my bench is the Vermeer sc252 stump grinder. I have finished The tune up and oil change as well as repaired the wicked exhaust leak on the exhaust fl**ge. There are a few things left to be done to the grind and will leave that to a later date. In the meantime, here's some photos and a video of it running. Thanks TGCR!

This weeks what’s on my bench is the Vermeer sc252 stump grinder. I have finished The tune up and oil change as well as repaired the wicked exhaust leak on the exhaust fl**ge. There are a fe…

Address

Boise, ID
83704

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

(208) 596-0714

Alerts

Be the first to know and let us send you an email when The Great Chainsaw Revival LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share