Inteccon

Call Directions Website Contact the business

Inteccon For over 25 years, Inteccon has been leading the way in Occupational Health, Safety, and Environmental solutions.

Trusted across five continents, It specializes in advanced monitoring instruments, ensuring the highest standards in safety and environmental management. From sound and vibration to air quality monitoring, our cutting-edge technology protects what matters most.

Three days at FISP 2026 in São Paulo, alongside safety and occupational health professionals from across Latin America a...
10/08/2026

Three days at FISP 2026 in São Paulo, alongside safety and occupational health professionals from across Latin America and beyond. The 25th edition brought together 800 exhibiting brands and visitors from 48 countries.

The conversations that matter to us happen in rooms like this one: what gets measured, how it gets documented, and what it takes for a reading to hold up when someone asks.

Today is the last day. If you haven't stopped by yet, we're here until 8pm at the Play Safer Pavilion.

👉 Learn how Inteccon can support your occupational health and safety program.

Hashtags:

WE ARE AT FISP 2026FISP is one of Latin America’s leading events for occupational safety, industrial protection, and ris...
10/07/2026

WE ARE AT FISP 2026

FISP is one of Latin America’s leading events for occupational safety, industrial protection, and risk prevention, bringing together professionals and companies from across the industry.

Here, we’re showcasing gas detection, environmental monitoring, and occupational safety solutions together with our partners at GfG – Smart Gas Detection Technologies.

It’s a great opportunity to connect with industry professionals, exchange ideas, and explore technologies that help create safer workplaces.

Are you at FISP? Come meet us!

📍 São Paulo Expo
📅 October 6–8, 2026

A semiconductor plant moves solvents every shift. Photoresists, st*****rs, cleaning agents. They pass through chemical d...
10/05/2026

A semiconductor plant moves solvents every shift. Photoresists, st*****rs, cleaning agents. They pass through chemical delivery rooms, through tool hookup during install, through the support areas that sit below the cleanroom.

The difficulty is not knowing they are there. It is that exposure in those spaces is intermittent and tied to specific tasks, so it appears and disappears with the work itself. A measurement taken once the task is finished describes something that already happened.

The Tiger XT is built for the opposite case. It responds in under two seconds in T90 and clears down just as fast, so the second reading does not carry the error of the first. Its internal gas table covers more than 750 volatile organic and toxic compounds, and it offers the widest measurement range on the market in a handheld instrument, from parts per billion to parts per million.

What keeps it reliable in a working facility is the patented Fence Electrode Technology, independently verified as best performing for speed, accuracy and resistance to humidity and contamination.

A late reading is a record. A fast one is a control.

👉 Learn how Inteccon can support your VOC monitoring program.

09/24/2026

More than a month has passed since the magnitude 7.4 earthquake struck Colombia on August 10, with its epicenter in San José del Palmar, Chocó. The news cycle has moved forward, but for many of the families affected, rebuilding their lives is still very much a present reality.

That’s why Inteccon decided this was the right moment to act.

Led by our VP of International Sales, Wilson Rodriguez, we made a donation to Fundación FASEMA Colombia, helping support their efforts to reach families in Chocó who continue to need assistance.

FASEMA is a nonprofit organization that works to foster human development through education, sports, culture, environmental initiatives, recreation, and the arts, with a particular focus on children and young people.

For us, Protect What Matters has never been only about the technologies we provide or the industries we serve. It’s also about recognizing when people and communities need support, even after the cameras have moved on.

Because recovery doesn’t end when the headlines do.

A rack runs hot. The reflex is to lower the setpoint for the whole room, which raises the energy bill for a problem conf...
09/24/2026

A rack runs hot. The reflex is to lower the setpoint for the whole room, which raises the energy bill for a problem confined to a few square meters.

Most hot spots are not a cooling capacity problem. They are a distribution problem. The CRAC units are delivering, but the air is not arriving where the load is. Perforated tiles opened in the wrong places, bypass through unsealed cutouts, recirculation over the top of a partial containment.

None of that is visible until someone measures what each tile actually delivers.

The AccuBalance 8380 captures airflow directly at perforated tiles and diffusers, reading from 42 to 4,250 m³/h within ±3%. Its back pressure compensation matters here specifically, because a capture hood placed over a high velocity tile alters the very flow it is trying to measure unless that effect is corrected.

Tile by tile, the map of where your cooling is actually going stops being an assumption.

👉 Learn how Inteccon can support your data center airflow management.

A blast is over in seconds. The complaint that follows can take months to resolve, and by then the only version of event...
09/21/2026

A blast is over in seconds. The complaint that follows can take months to resolve, and by then the only version of events that exists is the one written by whoever was standing outside the fence.

Air overpressure travels well beyond the pit. It rattles windows, it gets described as an explosion, and it becomes a record in a file that shows up again during the next permit review.

The SV 810 measures what actually happened. Peak readings up to 168 dB across a frequency range of 2 Hz to 250 Hz, in full compliance with the ISEE Blasting Seismograph Standards 2022, with real-time FFT analysis and audio recording on demand.

At 270 grams with up to 8 hours of autonomy and 8 GB of integrated memory, it deploys as a single-point meter or as one node alongside SV 803, SV 804 and SD 311 systems, depending on how much of the perimeter needs covering.

The blast is the shortest part of the story. The record is what lasts.

👉 Learn how Inteccon can support your blast monitoring strategy.

Fixed gas detection is only half the system. The other half is whether the alarm reaches the person who needs to act on ...
09/17/2026

Fixed gas detection is only half the system. The other half is whether the alarm reaches the person who needs to act on it.

In a process unit, that person is rarely near a control panel. They are on a walkway, behind a column, inside a maintenance envelope, wearing hearing protection. A signal on a screen does not reach them.

The ATEX beacon light turns detection status into something visible across the unit. Certified for zones 1, 2, 21 and 22 with IP65 protection, it uses 78 ultra-bright RGB LEDs to indicate atmospheric status at a distance, and its Modbus-controlled relay can trigger a siren or an additional device alongside it.

It installs as a direct replacement for existing ATEX traffic lights, so upgrading visibility does not mean rebuilding the system.

Detection tells the system. The beacon tells the people.

👉 Learn how Inteccon can support your fixed gas detection program.

09/15/2026

Residents near data centers are buying sound meters and posting what they find. The measurements are informal, the conclusions are not, and by the time they reach a public hearing the operator is responding to someone else's number.

The SV 307A changes what you bring to that conversation. It is the world's first Class 1 monitoring station with a MEMS microphone to receive PTB type approval, which matters because a type approved instrument is the one an authority cannot dismiss.

Built for permanent outdoor installation, it runs five to six days on internal battery with a solar option, transmits over 4G with GPS synchronization, and streams live audio to SvanNET so a level and its source can be reviewed together. A patented dual verification system checks the measurement in real time through a microphone array and raises an alarm if it detects a discrepancy, so the record verifies itself.

Chillers, cooling towers and generator testing all cross the property line. Knowing exactly how much, and when, is what turns a complaint into a conversation you can have.

You are not disputing someone else's number. You are presenting your own.

👉 Learn how Inteccon can support your environmental noise monitoring program.

A single particle landing on a wafer at the wrong moment produces a defect. Enough of them and the yield number for that...
09/09/2026

A single particle landing on a wafer at the wrong moment produces a defect. Enough of them and the yield number for that lot tells the story after the fact, when there is nothing left to correct.

Classification protects the cleanroom itself. What sits around it moves constantly: gowning rooms, airlocks, pass-throughs, tool hookup zones during install. Those spaces feed the cleanroom, and between scheduled certifications nobody is looking at them.

The AeroTrak 9303 puts that check in the hands of whoever is already walking the floor. It counts from 0.3 to 25 µm and reports three particle sizes at once, with a middle channel selectable at 0.5, 1.0, 2.0 or 2.5 µm depending on what matters in that area. It complies with ISO 21501-4 and is calibrated with NIST traceable PSL spheres, so the reading holds up when it needs to be documented.

At 1.3 lbs with 4.5 hours of continuous use and 1,500 sample records stored on board, it goes where the question is rather than waiting for the question to come to the instrument.

Yield problems are traced backwards. Particle counts are what make that trace possible.

👉 Learn how Inteccon can support your contamination control program.

Every flow measurement in a controlled environment rests on a reference. The mass flow controller, the sampling pump, th...
09/07/2026

Every flow measurement in a controlled environment rests on a reference. The mass flow controller, the sampling pump, the instrument being verified before a run. If that reference has drifted, nothing downstream is defensible, and the drift is invisible until an audit finds it.

The DryCal 800 is a primary standard with direct, defensible traceability to NIST. It measures gas flow instantly through a touchscreen interface that requires little training, which means calibration is not restricted to one person on the team.

Its design is built around interchangeable cells on a single base, covering 0.5 sccm to 100 slm. One standard handles the ultra-low flows of a particle counter and the higher flows of a sampling pump, with ±0.15% standardized accuracy across the Low, Medium, High and Ultra High cells. That makes it over four times more accurate than most mass flow controllers, so calibrating them in house becomes a real option instead of an outsourced line item.

When service is due, Mesa Labs is the only laboratory in North America able to repair and adjust the instrument, in an ISO 17025 lab accredited by NVLAP of NIST.

The instrument everything else is measured against should be the one you trust most.

Address

6590 W Rogers Circle Suite 11 & 12
Boca Raton, FL
33487

Telephone

+15619129809

Website

Alerts

Be the first to know and let us send you an email when Inteccon posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Inteccon:

Shortcuts

Share

Category