Ride Naked Creations

  • Home
  • Ride Naked Creations

Ride Naked Creations Right now our products consist of mainly horseshoe art and small metal fabrication.

Started building a tractor for a special little guy today. Going to be mounted to a ground stake for outside display.
12/10/2024

Started building a tractor for a special little guy today. Going to be mounted to a ground stake for outside display.

Sent the red Night Train home today. She should be ready for many years of trouble free riding. Mike's ready to rack up ...
02/09/2024

Sent the red Night Train home today. She should be ready for many years of trouble free riding. Mike's ready to rack up some miles!

Slowly welded up the worn spots on the engine plate to prevent getting it too hot and warping. Got it roughed out with a...
30/08/2024

Slowly welded up the worn spots on the engine plate to prevent getting it too hot and warping. Got it roughed out with a flap wheel on the grinder. Now the tedious process of hand filing it to make everything nice and flat.

Here's a perfect example of total lack of workmanship. Customer paid another shop a substantial amount of money to insta...
24/08/2024

Here's a perfect example of total lack of workmanship. Customer paid another shop a substantial amount of money to install a new engine on his zero turn mower last year.

That shop is out of business now so I got asked to check out an oil leak. The new engine has a cracked oil pan. I pulled the engine to inspect the damage and this is what I find. The old engine had worked loose and damaged the engine plate. The out-of-business shop simply bolted the expensive new engine to the damaged engine plate and this caused the oil pan to crack.

I will need to weld the damaged areas, grind them flat, re-drill the mounting holes and install the new oil pan. Not an impossible job but a lot more involved than I expected.

Haven't posted any updates in a bit. As soon as we get some tires the Night Train will be ready to go home.Also working ...
24/08/2024

Haven't posted any updates in a bit. As soon as we get some tires the Night Train will be ready to go home.

Also working on another horseshoe motorcycle to donate to the Anamosa Hillclimb.

Next project on the lift. 2009 Harley Night Train in for it's first service ever at 695 miles. Going to change all the f...
03/08/2024

Next project on the lift. 2009 Harley Night Train in for it's first service ever at 695 miles. Going to change all the fluids and give it a thorough inspection/adjustment from front to back. I'm sure the miles are going to add up a little faster once Mike gets in the saddle.

Totally Naked beer from New Glarus Brewing Co. The official beer of Ride Naked Creations. 🍺😋
30/06/2024

Totally Naked beer from New Glarus Brewing Co. The official beer of Ride Naked Creations. 🍺😋

30/06/2024

A little more motorcycle work in the shop this week. Installed some new Hogworks tail lights on Mark's trike last week. The brake lights didn't seem to be as bright as they should have been but they worked. Brought it back in this week for another looking over and found a cobbled up mess of a convertor module. Replaced the module with the correct one and things are working as they should be. If you can't see these brake lights now, you're blind!

Next project on the bench. Building a frame to mount this antique Western trap thrower. This was built some where around...
30/05/2024

Next project on the bench. Building a frame to mount this antique Western trap thrower. This was built some where around 1920-1930's. I will be giving this a total restoration to return it to working condition and will be taking it to local trap ranges as a working display.

This machine was made to throw clay targets on a regulation trap range and is equipped to throw doubles as well. The thrower was mounted in a trap house where a setter put targets on and varied the angle the targets were thrown by turning the machine. The control stand was mounted about 75' behind the trap house and connected to the trap by a pipe in a pipe. The puller cocked the trap by moving a long handle forward and back. The bird was thrown by pulling the handle back another inch or so. My brother and I set and pulled a lot of targets on this trap back in the early 70's when a group of guys set up a trapshooting range at the old city dump outside of Atkins, Iowa.

New saddlebag brackets fabricated for Lea's Softail. The original mounts use hairpin clips that fail and allow the saddl...
26/05/2024

New saddlebag brackets fabricated for Lea's Softail. The original mounts use hairpin clips that fail and allow the saddlebags to fall off on the road. They should be more secure with k**b bolts holding them on.

Address


52209

Telephone

+13195603453

Website

Alerts

Be the first to know and let us send you an email when Ride Naked Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

  • Want your business to be the top-listed Equipment Service?

Share