Crack Welding

Crack Welding I Can Fill Any Crack-2013
SCTCC Certified-2016
Welding/Fabrication 2016
Becker MN
Steel, Stainless, & Aluminum
Message/Text For Inquiries
763-482-2412

Thanks for all of the support and business over the years.
12/12/2025

Thanks for all of the support and business over the years.

Photo dump, 1-4 welding trailer hinges, 5-7 another trailer ramp repair, 8 fixing a crasck on a cast aluminum race wheel...
12/05/2025

Photo dump, 1-4 welding trailer hinges, 5-7 another trailer ramp repair, 8 fixing a crasck on a cast aluminum race wheeler engine, 9-12 complete rebuild of a snowmobile trailer ramp, 13-14 tractor snow plow upgrades, 15-16 steel target repairs, 17-19 repairing a stainless steel chair.

I made a light fixture for my basement, a lot of learning, and a lot of wires. I'm a welder, not an electrition, but I f...
08/06/2025

I made a light fixture for my basement, a lot of learning, and a lot of wires. I'm a welder, not an electrition, but I figured it out through trial and error.

The fixture is made from 3/4" pipe, sectioned out into 3 different fixtures on the ceiling to minimize wire use. Supported by multiple floor joice, all running on one 3 way dimmer switch. I do pull-ups on it daily, so it's plenty strong.

If you need something welded or you have ideas floating around in your head that you would like to make, just let me know. I'd be happy to help.

Back in October, we lost 2 best friends. They were reunited together forever. You will be missed but never forgotten.In ...
07/14/2025

Back in October, we lost 2 best friends. They were reunited together forever. You will be missed but never forgotten.

In remembrance, I made 2 crosses out of horse shoes and nails.

For some reason I can't post this to Facebook from Instagram...?
06/15/2025

For some reason I can't post this to Facebook from Instagram...?

February of last year, I took on a big project for a customer to extend his new boat trailer to fit his new boat. I had ...
04/08/2025

February of last year, I took on a big project for a customer to extend his new boat trailer to fit his new boat. I had to cut the trailer, repair some cracks, add some cross members, and weld it all back together.

It looked easier on paper than I thought. I had some problems pop up just like every project. It was a fun and challenging experience that I enjoyed every minute of.

The customer is still in the process of adding the center sliders, extending the front, adding another axel, and adding some hydrologic lifts to get the boat off of the trailer. I'll be posting more photos in the future when the trailer is complete.

I'll try to post once a week at minimum once a month to catch up with all the work I've been working on.

I'm a little behind on posting. This was back in June.In this post, I'm working on a ramp for a dock and fixing another ...
01/05/2025

I'm a little behind on posting. This was back in June.

In this post, I'm working on a ramp for a dock and fixing another trailer ramp for the same customer.

Reach out to me and I'de love to help you with any problem life has thrown your way, as long as it can be welded. 😉

Alright, let's start posting here again. Here's a quick repair I did on a dump trailer for a customer. Mild steal is alw...
12/13/2024

Alright, let's start posting here again. Here's a quick repair I did on a dump trailer for a customer.

Mild steal is always fun to work with. If you need anything welded, just let me know.

I've been repairing a lot of lawn mowers this spring and summer, easy and fun jobs that keep me busy.If you need anythin...
07/09/2024

I've been repairing a lot of lawn mowers this spring and summer, easy and fun jobs that keep me busy.

If you need anything repaired, give me a call or text, I'd love to help.

I tig welded a rose for the first time. It was a lot of fun, made out of .01 thick Mild Steel. After welding it together...
04/21/2024

I tig welded a rose for the first time. It was a lot of fun, made out of .01 thick Mild Steel. After welding it together and putting some heat to the peddles to make the unique colors, I also clear coated everything so it won't rust.

If anyone is interested in purchasing one, let me know and I'd be happy to make you one, two, or a hole bouquet for your special someone. $30-$100

I helped a customer build a stainless steel gas tank for a snowmobile. This was a fun project that I learned a lot on. I...
04/08/2024

I helped a customer build a stainless steel gas tank for a snowmobile. This was a fun project that I learned a lot on. I pressure tested everything, and it had no leaks.

If you need help with any stainless steel work, let me know. I would be happy to help.

I rebuilt my dads favorite trailer for Fathers Day. I couldn't have gotten it done without the help from . Once I surise...
04/08/2024

I rebuilt my dads favorite trailer for Fathers Day. I couldn't have gotten it done without the help from .

Once I surised it to him, we talked for over an hour about it, how I fixed it, all the stories we have made with it, and all the stories we will make with this 20+ year old trailer.

Thank you, Chase Marudas, from marketplace for sand blasting and painting it for me.

Address

22662 207th Street
Becker, MN
55308

Opening Hours

Monday 5pm - 8pm
Tuesday 5pm - 8pm
Wednesday 5pm - 8pm
Thursday 5pm - 8pm
Friday 12am - 5pm
Saturday 12am - 5pm
Sunday 12am - 5pm

Telephone

+17634822412

Website

Alerts

Be the first to know and let us send you an email when Crack Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Crack Welding:

Shortcuts

Share

Category