Zuroweste Welding LLC

Zuroweste Welding LLC Custom welding and semi trailer repair. We have a 5x10 plasma table, 250 ton press brake, and machining equipment. We weld carbon, aluminum, and stainless steel.

We specialize in custom fab work and more. Design and produce the Hay Hand bale unroller.

05/27/2026

It didn’t take long for the new shop to start looking busy!

From current projects to new builds getting underway, there’s been a lot happening lately — and we’re loving every minute of it. Seeing this place come to life and watching the business continue to grow is something we’re truly grateful for.

We’ve got some big plans ahead and plenty more in the works. Excited for what’s next and thankful for everyone who’s been part of the journey so far! 🔧🔥

05/05/2026

Long video, but it only took 8 minutes to pick and set the press. Having the right equipment sure makes things fast and easy. The truck was rated at picking 34,000 and according to the gages on the truck, it was at 99% capacity, so we was pushing it, but worked out perfectly.

05/05/2026

Picking the press off the trailer.

05/05/2026

Backing into the shop with the press.

8,000 square feet filling up, but still more room than the old shop. We are super excited to get in the new shop. More r...
05/05/2026

8,000 square feet filling up, but still more room than the old shop. We are super excited to get in the new shop. More room, faster turn around time, and room to grow. Did I mention MORE ROOM. We have been cramped and on top of each other for far too long. Stop by and see us and check out the new work place!

The final puzzle piece. Today we moved the 34,000 pound press brake into the new shop. It was tight, it was nerve wrecki...
05/05/2026

The final puzzle piece. Today we moved the 34,000 pound press brake into the new shop. It was tight, it was nerve wrecking, and exciting all at the same time. Once we got it out of the old shop, we was able to get it on a trailer and backed it into the new shop. From there, it only took 8 minutes to pick, move, and set in place. Everything worked out perfect. Excited to get to work in the new shop now!

New shop update! We are so close to moving in now! Down to just getting it wired and final touches on the office and bat...
03/11/2026

New shop update! We are so close to moving in now! Down to just getting it wired and final touches on the office and bathroom. We are beyond ready! Can not wait to have more room!

Trailer axle swap. Trailer came in with the front axle ripped out. We replaced with new axle, new brake chambers, slack ...
03/11/2026

Trailer axle swap. Trailer came in with the front axle ripped out. We replaced with new axle, new brake chambers, slack adjusters, and abs sensors. Fixed a mud flap bracket and air tank brackets. Road ready again.

Fuel tank for a rock crusher we rebuilt. One side was rotted out so we cut it off and cut out a new plate for that side....
03/11/2026

Fuel tank for a rock crusher we rebuilt. One side was rotted out so we cut it off and cut out a new plate for that side. Sand blasted and painted. No leaks. Turned out great.

Flatbed we installed on a brand new F450.
03/11/2026

Flatbed we installed on a brand new F450.

Trailer was hit in the rear and damaged the tail board. Too old to order a new one so we cut and bent a new tail board. ...
03/11/2026

Trailer was hit in the rear and damaged the tail board. Too old to order a new one so we cut and bent a new tail board. Fixed some cracks and rust spots. Turned out great.

Address

1921 County Road 156
Auxvasse, MO
65231

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

(573) 253-1864

Website

Alerts

Be the first to know and let us send you an email when Zuroweste Welding LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Zuroweste Welding LLC:

Shortcuts

Share

Category