Rieker Inc. - Tilt Sensing Solutions

Rieker Inc. - Tilt Sensing Solutions Rieker is an international leader in manufacturing & distribution of accelerometers, inclinometers.

ENGINEERED AROUND THE REQUIREMENT.CARS + SIGNS, ADAM, and Rieker Smart Connected Measurement began with real-world probl...
08/26/2026

ENGINEERED AROUND THE REQUIREMENT.

CARS + SIGNS, ADAM, and Rieker Smart Connected Measurement began with real-world problems requiring better ways to measure, document, and act on field conditions.

Those requirements shaped the core capabilities of the NEW H7 platform:

✔ Accurate angle and slope measurement relative to gravity
✔ GNSS location associated with the measurement, sensor, or asset
✔ Bluetooth connectivity for mobile App interaction, processing, and data storage

Purpose-built Apps and Portal capabilities transform this shared platform into distinct Total Solutions.

The H7 also demonstrates Rieker’s broader requirement-driven approach. Discovery determines whether an application can be served by an existing software-configurable platform, including the H6, H6EX, H4360, H3, and H2, or requires a tailored solution.

Often, the best-fit platform can be configured and integrated with the necessary outputs, power supply, connections, cabling, displays, software, and system components. When existing platforms cannot fulfill the complete requirement, Rieker can develop, test, and deliver a purpose-built solution.

RIEKER ENGINEERED SOLUTIONS.
REQUIREMENT-DRIVEN. RESULTS-FOCUSED.

MEASURE. CONFIRM. PROGRESS.Measure performance against defined requirements. Confirm fulfillment in real time. Progress ...
08/20/2026

MEASURE. CONFIRM. PROGRESS.

Measure performance against defined requirements. Confirm fulfillment in real time. Progress confidently – or immediately address the corrections needed.

Rieker Smart Connected Measurement solution provides the real-time decision support needed to approve work to progress or direct corrective work on the spot.

From site preparation through construction and completion, custom form workflows build project requirements directly into the Rieker App. Each workflow can define:

✔ What needs to be measured
✔ The acceptable thresholds or tolerances
✔ The documentation required
✔ The steps needed to complete the task

Field teams can then evaluate critical components, sections, surfaces, and areas as the project progresses.

The connected H7 provides accurate, direct-contact slope measurements in real time. The Rieker App brings those results together with dimensions, GNSS location, photos, and field notes – creating a complete record of the work and its performance against the defined criteria.

When fulfillment is confirmed, the work can progress. When it is not, teams can immediately identify the corrections needed, complete the work, and evaluate it again before proceeding.

Use structured forms for consistent project workflows or work ad hoc when greater flexibility is needed. Multiple teams can collect the same, different, or complementary datasets while moving efficiently through the project.

Ergonomic accessories also support upright operation, reducing the need to stoop, bend, or kneel while helping personnel maintain better visibility of the surrounding worksite.

Build the requirements into the workflow. Measure performance in the field. Confirm conformance before moving forward.

WORK SMART. WORK SAFE.

Place. Measure. Record.

Safer mobility begins with accurate, actionable information about the pedestrian environment.ADAM gives agencies, engine...
08/11/2026

Safer mobility begins with accurate, actionable information about the pedestrian environment.

ADAM gives agencies, engineering consultants, and contractors a scalable path from immediate field assessment to comprehensive spatial analysis and engineering-ready data.

Start with the scope you need today. Expand the workflow as project requirements evolve.

ASSESS NOW

Capture real-time slope and dimensional measurements, catalog assets, and document existing conditions with GNSS location, photos, videos, and field notes.

SEE THE COMPLETE SPACE

Use photogrammetry to capture detailed 3D models of sidewalks, curb ramps, crossings, and surrounding features for accurate ADA compliance analysis and reporting.

CREATE ENGINEERING-READY DATA

Produce point clouds and other spatial deliverables that can inform design, support construction, and guide remediation.

Whether you are evaluating current conditions, planning accessibility improvements, verifying completed work, or preparing data for engineering use, ADAM helps connect each stage through a consistent measurement and documentation process.

Your work. Your scope. Your scalable path to safer mobility.

FROM ROADWAY CAPTURE TO ACTIONABLE RECOMMENDATIONS - AUTOMATICALLY.Rieker CARS transforms continuously collected roadway...
08/07/2026

FROM ROADWAY CAPTURE TO ACTIONABLE RECOMMENDATIONS - AUTOMATICALLY.

Rieker CARS transforms continuously collected roadway data into curve-specific advisory speed recommendations, warning sign recommendations, and sign placement reports consistent with MUTCD guidance.

For curve analysis, each curve can be captured during one continuous drive – in either direction and at any safe speed. There is no need to turn around and repeat the curve at or above the recommended advisory speed, reducing unnecessary maneuvers, field time, and personnel exposure.

Now available with sign recognition, cataloging, and mapping, the solution also identifies roadside signs, connects them to their geographic locations, and organizes them into a mapped roadway inventory.

For comprehensive sign coverage, the corridor is driven in both directions to capture the signs intended for each direction of travel.

Together, these capabilities show:

✔ What advisory speed and warning signage the measured curve supports
✔ What signage is currently installed for each direction of travel

Roadway officials and engineering teams can compare recommendations with existing driver guidance, identify where action is needed, and prioritize improvements across individual curves, corridors, or an entire road network.

The result is a coordinated curve analysis and sign management resource supporting engineering review, signage planning, installation, maintenance, and ongoing roadway safety decisions.

Your roadway. Your reports. Your next actions – clearly defined.

Built to Perform Below the Waterline. Trusted to Inform Above It.Marine infrastructure doesn't get easier to maintain on...
07/30/2026

Built to Perform Below the Waterline. Trusted to Inform Above It.

Marine infrastructure doesn't get easier to maintain once it's underwater.

Whether monitoring marine pilings, piers and wharves, bridge foundations, offshore platforms, mooring systems, lock and dam structures, or water intake systems, continuous inclination data helps operators detect movement before it becomes a larger structural concern.

These environments demand sensors built for long-term reliability:

• Continuous immersion
• Corrosive saltwater environments
• Limited maintenance access
• Critical infrastructure that can't afford unexpected downtime

That's where design and material matter.

The Rieker H6 Flex Series, available in rugged aluminum or corrosion-resistant 316 stainless steel, is engineered for dependable long-term deployment in harsh marine environments.

✔ IP68 rated for continuous submersion
✔ Corrosion-resistant aluminum or 316 stainless steel housings
✔ 360° dual-axis inclination measurement
✔ Daisy-chain capable for simplified multi-sensor installations using a single communication cable
✔ Flexible analog and digital outputs for easy system integration

When continuous monitoring matters, your sensor shouldn't become the maintenance problem.

Learn more:
https://www.riekerinc.com/find-product/h6/

The Rieker H6 Inclinometer simplifies system integration by moving key configuration controls into software. Instead of ...
07/21/2026

The Rieker H6 Inclinometer simplifies system integration by moving key configuration controls into software. Instead of relying on a rigid, single-purpose device, the H6 provides a configurable sensing platform that adapts to your system requirements.

Software-enabled configuration allows:

✔ Selection of analog or digital outputs to match your PLC or controller
✔ Adjustment of measurement range and damping to manage vibration
✔ Deployment of the same hardware platform across multiple applications
✔ Fine-tuning sensing performance without replacing hardware

The result is greater flexibility for system integration and the ability to deploy a single configurable platform across multiple applications – reducing the need to stock multiple sensor variants.

Learn more –
https://www.riekerinc.com/find-product/h6/
https://www.digikey.ca/en/product-highlight/r/rieker/h6-configurable-digital-inclinometer






Not every hazardous location has the same requirements.Different environments present different risks. Different systems...
07/14/2026

Not every hazardous location has the same requirements.

Different environments present different risks. Different systems demand different outputs. Different operations require different levels of protection, monitoring, and response.

That's why Rieker doesn't start with a certification.

We start with the requirement.

The H6EX Intrinsically Safe Inclinometer is configured to meet the needs of the application and certified for the environment in which it operates. Whether the requirement is operator awareness, equipment protection, alarm activation, or process control, every solution is built to satisfy the operational objective first and validated through the certifications required for that environment.

✔ Intrinsically Safe Design
✔ Hazardous Location Certifications
✔ Configurable Outputs & Alarm Integration
✔ Shock & Vibration Resistant
✔ Built for Demanding Industrial Environments

DESIGNED FOR THE REQUIREMENT.

CERTIFIED FOR THE ENVIRONMENT.

Precision Inclinometers & Accelerometers for Hazardous Location Applications.

https://www.riekerinc.com/find-product/h6ex-intrinsically-safe-inclinometers/

The Evolution of Connected Measurement Has Arrived.Infrastructure professionals rely on measurements every day to assess...
07/07/2026

The Evolution of Connected Measurement Has Arrived.
Infrastructure professionals rely on measurements every day to assess conditions, document assets, verify compliance, and support decision-making.

Rieker's Smart Measurement ecosystem combines precision sensor technology, Bluetooth connectivity, GNSS location services, mobile imaging, and augmented reality measurement tools into a single connected workflow.

Capture:
✔ Slope and grade measurements
✔ Length, width, and height dimensions
✔ GPS-located observations
✔ Photos and video
✔ Notes and annotations
✔ Asset and condition information
✔ Guided workflows for consistent, repeatable results

Whether assessing curb ramps, documenting infrastructure, verifying grades, cataloging assets, or supporting construction and engineering projects, Rieker's Smart Measurement tools help transform measurements into organized, actionable information.

Measure. Document. Defend. Deliver.

Address

34 Mount Pleasant Road
Aston, PA
19014

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+16105002000

Website

Alerts

Be the first to know and let us send you an email when Rieker Inc. - Tilt Sensing Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Rieker Inc. - Tilt Sensing Solutions:

Shortcuts

Share

Category