Alaska Mechanical Repair

Alaska Mechanical Repair 17 year, Alaskan owned auto/trk repair business. I specialize in customer service! Most of my customers consoder me a friend. I am blessed!

Work on a little of everything from automotive to industrial. Lots of chassis and brake work thanks to our fine roads! Custom engine rebuilding and installations on your hot rod or your motor home. Work on a lot of older rigs, not scared of carburetors.

Almost a real engine! Right now, I'm lacking pushrods and a dipstick. I don't think the tr**ny in this '59 will be happy...
06/08/2026

Almost a real engine! Right now, I'm lacking pushrods and a dipstick. I don't think the tr**ny in this '59 will be happy for long....

The braided steel lines are replacement for the rubber lines provided by the factory. I guarantee these for as long as y...
05/22/2024

The braided steel lines are replacement for the rubber lines provided by the factory. I guarantee these for as long as you own the automobile.

Indaho: Mechanical term for "back from whence it came"!
05/20/2024

Indaho: Mechanical term for "back from whence it came"!

About to load a hungry Chevy!!
05/19/2024

About to load a hungry Chevy!!

This started with a customer telling me the van that he just bought was really hard to start. He got it fired up and bro...
04/12/2024

This started with a customer telling me the van that he just bought was really hard to start. He got it fired up and brought it down for me to tune up. Turned into a no start that the customer drove in! Couldn't start it on the lot so my son and I pushed it up the hill into the bay. Pulled a spark plug and it was drenched with gas. It was also an offbrand plug, so we reloaded it with Champions and a new cap and rotor. Still no start. Spark check was weak so pulled coil with bracket and trashed both screws in the swap. The famed junk drawer provided the necessary fasteners and reinstalled new Blue Streak coil. Fired on first turn!! Ran smooth after a few seconds. Here's the challenge. #2 plug wouldn't come out when doing the change. Oh, it turned! It just wouldn't back out of the hole. I'm kind freakin'!! 😳😳

02/15/2024

Kudos to Eagle Connecting Rods for answering their customer service calls !
Ray Huffman, Sales and Customer Service, not only answered the phone, but couldn't answer my initial question and called me back in about five minutes and gave me the info that I needed. I had called with a concern about a critical clearance on the connecting rod, and turns out, I was using a tape measure where I should've used a micrometer. That's a pun. When measured with the correct machinist tools. They were exactly to spec. Whew!!

How about a Xerox machine for steel tubing? This is as close as I can get today. Shadow does some great angles, too!
09/05/2023

How about a Xerox machine for steel tubing? This is as close as I can get today. 
Shadow does some great angles, too!

Top virologists claim dropping an engine on your foot will make ya holler! So, don't!Here's a couple looks at a Buick 40...
08/25/2023

Top virologists claim dropping an engine on your foot will make ya holler! So, don't!

Here's a couple looks at a Buick 401, called a Nailhead. The head has a very short, direct ability to move air! That equates to power. The finished product goes in a '63 Riviera....

It is official! Can't kill me too early, got to much work promised. Gotta sanitize every rig I'm working with.
07/11/2023

It is official! Can't kill me too early, got to much work promised. Gotta sanitize every rig I'm working with.

This is a '63 Ranchero that we did a power disc brake conversion. The original torque struts wouldn't allow for the new ...
05/07/2023

This is a '63 Ranchero that we did a power disc brake conversion. The original torque struts wouldn't allow for the new master cylinder. Cut those out and built these. Had CWM weld up the shock tower supports. I reinforced the firewall with a custom fab'd
bracket for a little more strength.

Address

8173A Dimond Hook Drive
Anchorage, AK
99507

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 6pm
Friday 9am - 6pm
Saturday 10am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Alaska Mechanical Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Alaska Mechanical Repair:

Shortcuts

Share

Category