Stick shift transmissions & Parts

Stick shift transmissions & Parts Specializing in stick shift (manual) transmissions and parts for street and racing applications.

Never used Transmission TCET17805 TremecTKX still in its original boxGear ratios: 2.87, 1.89, 1.28, 1.00, 0.68.26-spline...
04/17/2026

Never used Transmission TCET17805 Tremec
TKX still in its original box
Gear ratios: 2.87, 1.89, 1.28, 1.00, 0.68.
26-spline Summit
Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing
The TKX has 600 Ibs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm.
I can get you a video of it inside the box if you would love that

They're currently going for $2,895 before tax on Summit. Looking to get $2600.00

For sale is my new in box TUET11010 close ratioT56 Magnum.Gear ratios are 2.66, 1.78, 1.30, 1.00, .80, .63.26 spline inp...
04/17/2026

For sale is my new in box TUET11010 close ratio
T56 Magnum.

Gear ratios are 2.66, 1.78, 1.30, 1.00, .80, .63.
26 spline input shaft

$3100.00

Up for sale is a D&D Viper T56 (This is an actual Viper trans, NOT a Viper-spec, which is just an upgraded T56 with some...
03/19/2026

Up for sale is a D&D Viper T56 (This is an actual Viper trans, NOT a Viper-spec, which is just an upgraded T56 with some Viper parts), for $2800. I will be shipping it truck freight.

It has the .50 sixth gear, and with 3.73's, I would be revving about 1800 RPM at 80 MPH. It has about 12000 miles on it right now, and comes with a modular bellhousing, Pro 5.0 shifter, yoke, new throwout bearing, clutch cable, clutch quadrant, and clutch fork. The handle on the shifter is out of a GT500 and I customized it with a small pushbutton that's had the wiring contained within the handle for a clean look. I had the button activating a relay to turn on my line lock.

ST1200 LENCO Transmission with 5 Speed + Reverse Gears: 2.81, 2.14, 1.64, 1.25, and 1.00.Gear Sets Included: Comes with...
02/25/2026

ST1200 LENCO Transmission with 5 Speed + Reverse

Gears: 2.81, 2.14, 1.64, 1.25, and 1.00.

Gear Sets Included: Comes with #31, 31, 31, 25,

Clutch System: The ST1200 LENCO Transmission comes with a new SECO 11-inch Clutch Disc, Pressure Plate, and Throw Out Bearing.

Additional Components: Along with the transmission itself, the package includes a new shifter and clutch for comprehensive installation and compatibility with various vehicle setups.

$6000.00 + plus shipping

GForce- GSR 4spd Dogbox Transmission32 spline output26in setback shifter mountTransmission has less than 10hrs drive tim...
02/09/2026

GForce- GSR 4spd Dogbox Transmission
32 spline output
26in setback shifter mount

Transmission has less than 10hrs drive time on a fresh build. Everything except the driveshaft is included

1st 3.06
2nd 2.05
3rd 1.45
4th 1.00

Shifter arm and handle
Custom made aluminum Miata bellhousing adapter
Transmission mount & custom cross member
Wilwood clutch master cylinder
Braided clutch line
Braided extra-long bleed line
Tilton clutch slave cylinder
ACT Prolite Flywheel (1.8)
ACT Extreme clutch pressure plate
ACT 6 puck sprung disc

$9500.00

I have a 5 speed cs3 lenco. It's out of my BMW set up. Custom built vertical gate shifter. Purchased from Rod Saboury a ...
02/07/2026

I have a 5 speed cs3 lenco. It's out of my BMW set up. Custom built vertical gate shifter. Purchased from Rod Saboury a few years back. Never had any issues. The shifter works awesome.

Video of a pass with it.

$6000.00 + freight cost

02/07/2026

I have a 5 speed cs3 lenco. It's out of my BMW set up. Custom built vertical gate shifter. Purchased from Rod Saboury a few years back. Put new sprags in it when I got it. Never had any issues. The shifter works awesome.

Video of a pass with it.

Good Richmond/Doug Nash 4+1 5-speed with the following ratios:1st= 3.38 2nd= 2.13 3rd=1.57 4th= 1.24 5th= 1.0Performed w...
02/07/2026

Good Richmond/Doug Nash 4+1 5-speed with the following ratios:
1st= 3.38 2nd= 2.13 3rd=1.57 4th= 1.24 5th= 1.0

Performed well with under 3K miles on it. Has a hydraulic throw out bearing with braided hoses, Wilwood slave cylinder and u-joint yoke plus a Hurst shifter.
(Also selling the SBF bellhousing, 10.5" clutch and pressure plate in a separate ad)

$2500.00 + shipping

I have a Ford T5 Transmission (1352-238) which is a world class, but from a V6 (its from a 95-97 Mustang).I also came ac...
01/31/2026

I have a Ford T5 Transmission (1352-238) which is a world class, but from a V6 (its from a 95-97 Mustang).

I also came across a rare bell housing that had the Chevy 350 bolt pattern (bell housing has a part number of 3251268), and a T5 bolt pattern. There is some mod work that needs to be done to make this work, but from all the research I did, its a very doable project to get a T5 ford trans to work on the 350 SBC.

I have the following stuff

T5 transmission 1352-238
Bell Housing 3251268
Clutch fork,
old clutch disk
Transmission related stuff shown in the pic.
(if its not in the pics, its not included)

Gear ratios
3.35
1.93
1.29
1.00
0.72

$1500.00 takes everything

Like new condition G-force 101A transmission.I bought new from Austtran services.Includes slip yoke and long shifter.The...
01/26/2026

Like new condition G-force 101A transmission.
I bought new from Austtran services.
Includes slip yoke and long shifter.
The transmission is currently still in the car.
It is set up behind an LS engine, and it has 26 spline input.

Ratios 2.311 1.671 1.281 1.000

$4800.00

Hurst pistol grip ratchet shifter #3162009I was gonna use this for a 4r70w swap but I recently bought the stock shifter...
01/26/2026

Hurst pistol grip ratchet shifter #3162009

I was gonna use this for a 4r70w swap but I recently bought the stock shifter from here. This is a direct bolt on for a c4 c6 transmission. If you search people have used this on a Aod and 4r70w as well by making a bracket.

$350.00 shipped buyer covers PayPal fees

Address

Albuquerque, NM
87101

Opening Hours

Monday 8am - 6pm
Tuesday 8am - 6pm
Wednesday 8am - 6pm
Thursday 8am - 6pm
Friday 8am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Stick shift transmissions & Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stick shift transmissions & Parts:

Shortcuts

Share

Category