eyc-tech

Directions Website Contact the business

eyc-tech eyc-tech develops and manufactures industrial transmitters and measurement solutions for semiconductor, cleanroom, and precision process applications.

Expertise includes air velocity, humidity, dew point, pressure, flow, temperature, and air quality.

🤔 HVAC Basics | Why Does Indoor Humidity Rise After Increasing Outdoor Air Intake?💡 In HVAC systems, increasing outdoor ...
2026/11/12

🤔 HVAC Basics | Why Does Indoor Humidity Rise After Increasing Outdoor Air Intake?

💡 In HVAC systems, increasing outdoor air intake supports air exchange. However, when outdoor air has a high moisture content, it also increases the moisture load the air conditioning system must handle. If indoor humidity rises after an outdoor air adjustment, possible causes include increased intake airflow, higher outdoor moisture content, or dehumidification operation that has not been adjusted accordingly. Damper position alone cannot determine the cause.

✨ The THS302 Multifunction Temperature & Humidity Transmitter (Duct Type) can be installed in an outdoor air duct section that meets the product’s operating conditions and is protected from rainwater and condensation to measure incoming air temperature and relative humidity. The monitoring system can then calculate the humidity ratio using the applicable air pressure to assess the moisture content before the air enters the air handling unit.

Paired with the FTS34 Air Velocity Transmitter (Duct Type) at a representative location in the same outdoor air duct, the system continuously monitors air velocity to track airflow changes before and after damper or fan adjustments. This provides actual air delivery information that control settings alone cannot reveal.

🖇️ Combining the THS302 with the FTS34 enables monitoring of both incoming air moisture conditions and air delivery conditions—from outdoor air temperature and humidity to changes in duct air velocity. Together, they establish a more comprehensive outdoor air measurement solution, providing data to support outdoor air settings, HVAC moisture load assessment, and operating adjustments.

📲 THS302:https://www.eyc-tech.com/ths30x-series-multifunction-temperature-humidity-transmitter-wall-type-duct-remote-outdoor

📲 FTS34:https://www.eyc-tech.com/fts34-35-air-velocity-transmitter

💨 Can't See Your Compressed Air Consumption? Start with Precise Measurement to Better Manage Energy Use!In industrial pr...
2026/11/10

💨 Can't See Your Compressed Air Consumption? Start with Precise Measurement to Better Manage Energy Use!

In industrial processes, compressed air is an essential energy resource. But can monitoring supply pressure alone truly reveal actual compressed air consumption? 🤔

📘 Thermal Mass Airflow Measurement Technology White Paper

Explore two eyc-tech measurement products in detail:
🔹 FTM06D Insertion Type Air Velocity Transmitter
Utilizing hot-wire measurement technology, it is ideal for adding air velocity monitoring points to existing pipelines.

🔹 FDM06-I Venturi Type Flow Transmitter
Combining Venturi flow design, bypass channels, and hot-wire sensing technology, it provides instantaneous flow rate and accumulated flow monitoring.

✅ Compare the measurement principles and installation methods of both technologies
✅ Understand compressed air flow monitoring and key product selection considerations
✅ Leverage air consumption data for energy management, efficiency improvements, and energy-saving analysis

🔎 Read the Complete Technical White Paper
https://www.eyc-tech.com/ftm06d-vs-fdm06-i-thermal-mass-flow-measurement

🤔 Semiconductor Basics | Is Rising Temperature in the Process Area Caused by Increased Equipment Heat Output or Insuffic...
2026/11/05

🤔 Semiconductor Basics | Is Rising Temperature in the Process Area Caused by Increased Equipment Heat Output or Insufficient Supply Air?

✨ In semiconductor process areas, a rise in room temperature when multiple pieces of equipment operate simultaneously may be related to increased equipment heat output, insufficient air supply, or changes in airflow distribution. Monitoring room temperature alone often makes it difficult to determine whether the temperature rise is accompanied by changes in supply air conditions.

📌 The THS301 Multifunction Temperature and Humidity Transmitter (Wall-Mounted Type) can be installed at a representative location in the work area to continuously monitor temperature and relative humidity. Comparing environmental trends with equipment start and stop times helps identify when temperature rises and whether these changes are related to equipment operation.

🖇️ Paired with the FTS34 Air Velocity Transmitter (Duct Type), installed in a representative supply air duct section serving the area, it helps identify decreases or fluctuations in supply air velocity. By comparing work area temperature measured by the THS301 with supply air velocity measured by the FTS34, a temperature rise accompanied by reduced air velocity can guide initial checks of dampers, fans, and duct air delivery conditions. If air velocity remains stable, further checks of equipment heat loads, supply air temperature, and local airflow distribution can help narrow down the possible causes.

📲 THS301:https://www.eyc-tech.com/ths30x-series-multifunction-temperature-humidity-transmitter-wall-type-duct-remote-outdoor

📲 FTS34:https://www.eyc-tech.com/fts34-35-air-velocity-transmitter

2026/11/03

🙌 electronica 2026, a major global event for the electronics industry, will take place in Munich, Germany, on November 10–13, 2026.

🤗 eyc-tech will showcase a wide range of measurement products and application solutions for temperature, humidity, dew point, differential pressure, pressure, air velocity and volume, air flow, and liquid flow, with a focus on process environmental control, energy-efficient environmental control, and semiconductor process control.

We warmly invite equipment manufacturers, system integrators, semiconductor and electronics industry professionals, and partners worldwide to visit us at Hall A3|Booth A3.161/5 to discuss your measurement needs and industry applications with the eyc-tech team.

▶️ Exhibition Highlights
✔ Semiconductor Process Control
✔ Process Environmental Control
✔ Energy-Efficient Environmental Control
✔ AI Data Center Cooling Measurement
✔ CDA & Process Air Supply

▶️ Exhibition Information
Exhibition|electronica 2026
Dates|November 10–13, 2026
Venue|Messe München, Munich, Germany
Hall|A3
Booth|A3.161/5

📲 Visitor Tickets & Registration: https://electronica.de/en/trade-fair/tickets/

🤔 HVAC Basics | Why Is Supply Airflow Still Insufficient When the Fan Is Running Normally?😮 In HVAC systems, continuous ...
2026/10/29

🤔 HVAC Basics | Why Is Supply Airflow Still Insufficient When the Fan Is Running Normally?

😮 In HVAC systems, continuous fan operation does not necessarily mean sufficient airflow reaches every area. Increased filter resistance, changes in damper positions, or adjustments to branch duct airflow distribution can all affect actual supply airflow. Monitoring fan on/off status or variable frequency drive (VFD) alone often provides limited insight into airflow changes within the ducts.

⏩ The AFMC HVAC Average Flow Measuring Tube uses the Pitot tube principle, with multiple pressure ports that collect and average pressure readings from different positions within the duct. This reduces the limitations of assessing airflow at a single measurement point. Installing the tube in a suitable duct section according to duct dimensions and on-site installation conditions establishes a measurement point for continuously tracking supply air conditions.

Paired with the FDM06-X Thermal Mass Diff. Pressure Signal Processor, and configured according to the flow tube coefficient, duct cross-sectional area, and measurement conditions, the system provides air velocity and airflow rate data that can be integrated into a monitoring system through interfaces such as RS-485. Combining the AFMC’s pressure-averaging structure with the FDM06-X’s sensing and signal processing allows measured airflow rates to be compared with fan frequency, damper settings, and maintenance records. These comparisons help guide troubleshooting of insufficient supply airflow and provide a basis for airflow adjustments and ongoing operational tracking.

📲 FDM06-X:https://www.eyc-tech.com/fdm06-x-thermal-mass-diff-pressure-signal-processor

📲 AFMC:https://www.eyc-tech.com/afmc-hvac-average-flow-measuring-tube

2026/10/20

🔍 Stable semiconductor facility operations start with reliable measurement at every critical point.

Is cleanroom temperature and humidity stable?
Are FFU, MAU, and AHU airflow conditions operating as expected?
Is the CDA dew point beginning to rise?
Are cooling water flow, pressure, and liquid level within the required range?

Behind semiconductor manufacturing, facility systems such as environmental control, HVAC airflow, compressed dry air (CDA), cooling water, and process utility piping all rely on continuous and reliable measurement data.

📌 eyc-tech Semiconductor Facility Measurement Solutions
Covering:
▪ Cleanroom temperature, humidity, and differential pressure
▪ FFU / MAU / AHU air velocity, airflow, and filter differential pressure
▪ CDA dew point and air quality management
▪ Cooling water flow, temperature, pressure, differential pressure, and liquid level
▪ Equipment-room indoor air quality
▪ Local display and BMS / SCADA / PLC signal integration

Through continuous multi-point measurement from the environment to utility piping, eyc-tech helps facility teams identify system changes earlier, compare abnormal conditions across different systems, and establish a more data-driven approach to maintenance and facility management.

👉 Full Application Case | Semiconductor Facility Measurement Solutions: From Cleanroom Environments to CDA and Cooling Water System Applications:https://www.eyc-tech.com/show/semiconductor-cleanroom-cda-measurement.htm

😮 In HVAC systems, airflow passing through elbows, duct transitions, dampers, or branch ducts can easily develop differe...
2026/10/15

😮 In HVAC systems, airflow passing through elbows, duct transitions, dampers, or branch ducts can easily develop different velocity distributions. Therefore, even within the same duct, air velocity may vary depending on the measurement location, and a single-point measurement may not represent the overall airflow condition.

👍 The AFMC HVAC Average Flow Measuring Tube features a multi-point averaging pressure measurement structure that captures pressure signals from different locations across the duct cross-section, reducing the impact of variations associated with single-point air velocity measurement. When paired with the PMM330 Differential Pressure Transmitter for low differential pressure measurement and air velocity calculation, air velocity as low as approximately 1 m/s can be measured, making the combination suitable for air handling units, main ducts, and supply and return air applications.

By combining the AFMC + PMM330, more representative average air velocity data can be obtained, providing a measurement basis for airflow balancing, HVAC system adjustment, and airflow management.

📲 More Success Story:https://www.eyc-tech.com/hvac-airflow-measurement-averaging-pitot-tube

😮 In semiconductor, biopharmaceutical, and electronics manufacturing, process stability depends on more than individual ...
2026/10/13

😮 In semiconductor, biopharmaceutical, and electronics manufacturing, process stability depends on more than individual equipment.

From cleanroom temperature, humidity, and differential pressure to HVAC air velocity and flow, process exhaust, CDA, nitrogen, cooling water, and equipment piping, measurement data across different systems are interconnected.

📌 By measuring multiple parameters—including temperature, humidity, air velocity and flow, differential pressure, dew point, pressure, liquid flow, and level—facilities can continuously monitor:
✔️ Cleanroom and process equipment environments
✔️ HVAC airflow and energy-efficient environmental control
✔️ Process exhaust and waste gas treatment
✔️ CDA and high-purity gas supply
✔️ Cooling water and process piping
✔️ Air cooling and liquid cooling in AI data centers
✔️ Glove boxes and biological safety cabinets

👍 eyc-tech provides measurement solutions covering environmental conditions, airflow, gases, and liquid piping. Our solutions can also integrate with existing BMS, SCADA, PLC, or data acquisition systems to establish a continuous and traceable process measurement framework.

👉 Explore the full application article:https://www.eyc-tech.com/semiconductor-biopharma-electronics-process--environmental-control

🤔Semiconductor Process Basics | Why Can Process Equipment Still Overheat Even When Cooling Water Is Flowing? 🙁 In semico...
2026/10/08

🤔Semiconductor Process Basics | Why Can Process Equipment Still Overheat Even When Cooling Water Is Flowing?

🙁 In semiconductor process equipment, cooling water removes the heat generated during equipment operation. However, simply having water flowing through the pipeline does not mean that the actual flow rate and cooling water temperature meet the equipment requirements.

😮 When cooling water flow decreases or the temperature of the water entering the equipment increases, the actual cooling capacity may still be affected even if the water continues to circulate through the pipeline. Therefore, in addition to confirming whether cooling water is flowing, it is also necessary to monitor water flow velocity and temperature changes to further evaluate the cooling water supply conditions of the equipment.

💧 The FTC06 Temperature and Flow Transmitter utilizes the thermal mass measurement principle, with a water flow velocity measurement range of 0–3 m/s, an accuracy of ± (1% mv + 0.05 m/s), and a medium temperature range of 0–80°C. Through RS-485, water flow velocity and temperature data can be obtained simultaneously, allowing both cooling water flow and temperature changes to be monitored at a single measurement point.

🖇️ When paired with the DPM04 Flow Totalizer, operators can further monitor instantaneous flow and totalized flow directly at the equipment site, making it easier to verify the current cooling water supply conditions and accumulated usage over a period.

By combining the FTC06 with the DPM04, the cooling water conditions of process equipment can be monitored from real-time flow and medium temperature to totalized flow, establishing a more comprehensive cooling water measurement solution for process equipment.

📲 FTC06:https://www.eyc-tech.com/ftc06-flow-transmitter

📲 DPM04:https://www.eyc-tech.com/dpm04-flow-totalizer

Address

235
Xinbei
中和區橋和路15號12樓

Opening Hours

Monday 08:30 - 17:30
Tuesday 08:30 - 17:30
Wednesday 08:30 - 17:30
Thursday 08:30 - 17:30
Friday 08:30 - 17:30

Alerts

Be the first to know and let us send you an email when eyc-tech posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to eyc-tech:

Shortcuts

Share