https://www.facebook.com/304008166120507/

Mr Printcraft - 印技先生, Taipei (2026)

☞ 3D 列印（FDM／MSLA）
☞ 雷射雕刻
☞ 原型製作
☞ 3D 掃描／逆向工程
☞ 3D 列印教學
☞ 價格合理
☞ 安心配送
☞ 3D printing (FDM/MSLA)
☞ Laser engraving
☞ Prototyping
☞ 3D scanning / Reverse engineering
☞ 3D printing lessons
☞ Acceptable rates
☞ Secure delivery 大家好！我是 Alex！

過去十年，台灣一直是我的家，也是我與兩個可愛的孩子建立美好家庭的地方。然而，我的熱情不僅限於家庭生活 – 過去五年來，我一直著迷於 3D 打印的世界！

一切始於興趣，我沉迷於擺弄機器，將想法化為塑料實體。但最近，一些想法突然冒出來了。看到社區裡對獨特 3D 打印作品的喜愛（有時甚至是需求！），我決定冒險嘗試，開始為其他人打印物

品。

因此，我很高兴推出此頁面 – 這是一個神奇的 3D 打印空間，您可以將您的想法化為現實。因此，無論您遇到功能性問題還是創意靈感，讓我們一起看看可以打印出什麼吧！

---

Hi everyone, I'm Alex! But my passion goes beyond just family life – I've been obsessed with the world of 3D printing for the past 5 years! It all started as a hobby, tinkering away and bringing ideas to life in plastic form. Seeing the joy (and sometimes the need!) for unique 3D printed creations in my community, I decided to take the leap and start printing for others. That's why I'm excited to launch this page – a space where you can turn your ideas into reality with the magic of 3D printing. So, whether you have a functional problem or a creative itch, let's see what we can print together!

30/06/2026

最近接到的訂單之一，是Eric Gau委託製作的卡片收納盒。這套包含 12 個部件（收納盒本體＋外蓋＋隔板）的印刷品，能滿足您所有的收納需求，並融入了色彩與圖示設計的巧思。每片外蓋耗時 9 小時，每個收納盤耗時 7 小時，所有工序均在 5 天內完成。高先生，感謝您的信任！=) （這頂安全帽是我的，請忽略 =D

One of the recent orders was a card organizer commissioned by Eric Gau. A 12 part print (container + cover + dividers) for all your organizing needs with a twist of colour and pictograms. 9 hours per cover and 7 hours per tray, all done in a course of 5 days. Thank you for your trust Mr Gau! =) (the helmet is mine, please disregard =D

31/03/2026

這是為 Kindred Spirit 製作的兩款主機外殼，採用簡約的 PLA 材質列印，並加入了特別巧思——手持遊戲機製造商的標誌。雖然只是簡單的改動，卻帶來截然不同的視覺效果！=) 圖片由客戶提供 =)

Here are two console covers for printed in simple PLA with an extra twist - the logos of the handheld manufacturers. An easy addition, but a whole new look! =) Photo courtesy of the client =)

13/01/2026

幹大事的時間到了！我剛入手了這台大機器，以後列印面具、頭盔、Cosplay 盔甲、武器，甚至是大型工程零件都變得更容易了！如果你有任何「大件」物品需要列印，儘管跟我說！

Time for big things! I have just purchased this big machine, so printing masks, helmets, cosplay armours and weapons as well as big engineering parts becomes easier now! Let me know if you need anything printed BIG!

16/12/2025

為的遊戲場次製作的 18 隻 D&D 人偶。Kevin 對成果很滿意，我也很高興最後的效果不錯。沒錯，我用了紅色樹脂而不是傳統的灰色，原因有幾個：灰色用完了（哈哈），而且這些人偶在上色前都會先上底漆，所以樹脂顏色其實不重要。實際上紅色反而可能更實用，因為在噴底漆時更容易看出有沒有漏噴的地方。=)

18 D&D figurines requested by Kevin Lee for their gaming sessions. Kevin was happy with the results and I'm happy it turned out well. Yes, I used red resin instead of the traditional gray one, mainly for several reasons: I ran out of gray (haha) and the figurines will be primed before painting, so the resin colour doesn't really matter in this case. Actually it may be useful as it'll show missed spots better when putting on layers of primer. =)

12/12/2025

工作中最棒的一部分，就是看到客戶使用你的設計後感到滿意所給予的正面回饋。這次我們遇到一個舊款 TUMI 行李箱的破損提把，主人選擇修理而不是購買新的，我個人完全支持這種做法。經過好幾個晚上的加工與四次測試列印，提把終於完成了。使用了主人最喜歡的橘色，並以 PETG 製作，兼具剛性與低成本。祝旅途愉快。

One of the best parts of the job is the positive feedback from customers who use your designs and are happy with the results. In this case, we had a broken handle on an old TUMI suitcase. The owners chose to repair it instead of buying a new one. And I'm personally all up for that! After several late evenings and four test prints, the handle was ready. It was printed in the owner’s favorite orange and made in PETG for rigidity and low cost. =) Happy travels!

Address

Taipei

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Mr Printcraft - 印技先生 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Mr Printcraft - 印技先生