名陽機械股份有公司 MYLAS Machinery

名陽機械股份有公司 MYLAS Machinery 名陽機械為CNC 車銑複合機製造商，我們的使命為提供一站式的解決方案，並且幫助客戶快速地減少加工時間，主要製造多軸CNC自動車床 MYLAS is a leading CNC manufacturer company based in Taichung, Taiwan. http://www.mym.com.tw/en/

With over 30 years of experience, we aim to provide ONE-STOP-SOLUTIONS for customers in different industries worldwide to strengthen their competitiveness, optimize production processes, and to achieve their goals with our high precision, and high-end machines. MYLAS is recognized as one of the most capable manufacturers in the globe and all our machines are manufactured to the highest quality mee

ting both ISO9001 and CE certification. Our offices and dealers spread around the world. Our aim is to provide services that better boost and benefit our customers' business. For more info, please visit our website.

25/08/2026

針對機台進行改善測試，利用雷射干涉儀檢驗 X 軸與 Z 軸的重覆定位精度。

即使是推出多年的機型，我們仍會透過實際量測來確認改善效果，找出可再優化的空間。

雷射檢驗能清楚反映各軸的運動精度，是機台精度分析與改善的重要工具。

好的機台不是一次做到最好，而是在每一次測試與調整中持續精進。

• 驗證改善成果
• 確認重覆定位精度
• 提升加工穩定性
• 持續優化機台性能

Improving Precision, Even on Existing Models

As part of our machine improvement project, laser interferometer testing was carried out to verify the repeatability accuracy of the X-axis and Z-axis.

Even for models that have been in production for years, we continue to measure and evaluate machine accuracy to confirm improvement results and identify opportunities for further optimization. Laser inspection provides reliable data for analyzing and improving machine performance.

A good machine is not built through a single improvement, but through continuous testing, evaluation, and refinement.

• Verify improvement results
• Check repeatability accuracy
• Improve machining stability
• Continuously optimize machine performance

#雷射檢驗 #重覆定位精度 #精度改善 #機台優化 #精密加工

Contact information:
https://linktr.ee/MYLAS_MACHINERY

21/08/2026

防爆電纜接頭（Explosion-proof Cable Gland）廣泛應用於能源、電力、工業自動化及半導體設備等領域，是許多電氣設備中不可或缺的關鍵零件。

這次的零件採用鋁棒材加工，透過一次裝夾完成：
• 車削（Turning）
• 銑削（Milling）
• 鑽孔（Drilling）
• 車牙（Threading）
• 攻牙（Tapping）

將多道製程整合於同一台設備中完成，減少重複定位與換線時間，同時兼顧加工一致性與生產效率。

應用領域包括：
• 電力配電系統
• 能源基礎建設
• 工業自動化設備
• 半導體設備
• 電氣設備與控制箱

加工現場總有不同的做法與思維。

如果是您來加工這類零件，會優先從刀具配置、程式優化、切削參數，還是自動化上下料著手改善？

歡迎分享您的經驗與看法，也想聽聽大家面對這類複合加工零件時，最常遇到的挑戰是什麼。

Explosion-proof Cable Gland components are widely used in power, energy, industrial automation, semiconductor equipment, and electrical systems where reliability and consistency are critical.

This aluminum component is manufactured using one-setup CNC machining, combining:
• Turning
• Milling
• Drilling
• Threading
• Tapping

in a single process.

By integrating multiple operations into one setup, the machining process helps reduce part handling, improve dimensional consistency, and support efficient production.

Applications include:
• Power Distribution Systems
• Energy Infrastructure
• Industrial Automation Equipment
• Semiconductor Equipment
• Electrical Equipment & Control Panels

Precision machining solutions for demanding industrial environments.

Every shop has its own approach to improving productivity. For a part like this, what would you focus on first to reduce cycle time or improve efficiency?

Would it be tooling, machining strategy, cutting parameters, automation, or something else?

Feel free to share your experience and insights.



Contact information:
https://linktr.ee/MYLAS_MACHINERY

13/08/2026

真正困難的不是加工，而是穩定量產。

這類導電連接零件同時具備車削、滾花、鑽孔及異形銑削等加工特徵。

若採用傳統加工方式，往往需要多次換夾與多台設備接力完成，不僅增加製程時間，也提高尺寸誤差風險。

透過車銑複合加工技術，可將多道工序整合於同一機台完成，大幅降低換夾誤差，同時提升加工精度與量產穩定性。

作為真正的一站式加工解決方案，車銑複合能有效提高生產效率，並滿足複雜導電零件的加工需求。

材質說明：
為呈現更清晰的拍攝效果，影片展示件採用黃銅材質拍攝；實際量產規格為紅銅 Cu-ETP（C11000）材質。

The Real Challenge Isn't Machining, It's Consistent Production.

This Electrical Connection Bushing combines multiple machining features, including turning, knurling, drilling, and profile milling.

With conventional machining methods, multiple setups and machine transfers are often required, increasing production time and the risk of dimensional variation.

By utilizing Turn-Mill Machining, multiple operations can be completed in a single setup on one machine. This significantly reduces setup errors, improves machining accuracy, and ensures greater production consistency.

As a true One-Stop Machining Solution, Turn-Mill technology helps manufacturers streamline the production of complex electrical components while maintaining quality and efficiency.

Note:
For better visual clarity during filming, the part shown in this video was machined from brass. The actual production specification is Cu-ETP Copper (C11000).

Contact information:
https://linktr.ee/MYLAS_MACHINERY

#車銑複合 #一站式加工 #導電零件 #銅件加工 #紅銅加工 #黃銅加工 #精密加工 #異形件加工 #金屬加工 #電力設備

每天都在追求 ±0.01mm，卻很少計算爸爸為家庭付出了多少。加工出了誤差，可以重新來過；人生走偏了方向，總有個人默默拉你一把。小時候覺得爸爸什麼都會，長大後才發現，他也會累、也有壓力。只是把擔心留給自己，把最好的留給家人。就像那些關鍵零件...
07/08/2026

每天都在追求 ±0.01mm，
卻很少計算爸爸為家庭付出了多少。

加工出了誤差，可以重新來過；
人生走偏了方向，總有個人默默拉你一把。

小時候覺得爸爸什麼都會，
長大後才發現，他也會累、也有壓力。

只是把擔心留給自己，把最好的留給家人。

就像那些關鍵零件，平時不顯眼，
卻支撐著整個系統穩定運轉。

父親節到了，別忘了跟爸爸說一句：
「爸，辛苦了，謝謝你。」

MYLAS 向每一位默默守護家庭的爸爸致敬，
祝天下所有父親 父親節快樂！❤️

We pursue ±0.01 mm precision every day, yet rarely measure how much our fathers have given for the family.

A machining error can be corrected.

When life takes a wrong turn, there is always someone quietly guiding us back.

When we were young, we thought our fathers could do anything.

As we grow older, we realize they get tired and carry burdens too.

Just like the critical components inside a machine, they may go unnoticed, but they keep everything running smoothly.

This Father's Day, don't forget to say:
"Dad, thank you. You've worked so hard."

MYLAS salutes every father who quietly supports and protects his family.

Happy Father's Day! ❤️

#父親節快樂 #精密製造 #爸爸辛苦了 #台灣製造

29/07/2026

精度的藝術，來自每一道工藝細節
高精度 CNC 機台的表現，不只是來自設計。

更來自每一道組裝、調校與檢驗程序。
本次展示 CNC 機台組裝過程中的關鍵精度控制：
• 精密鏟花修整接觸面高點
• 接觸點數 17–23 點/in²
• 油袋深度 0.05–0.08 mm
• 基座垂直度 ≤ 0.005 mm
• 上仰量測 ±0.003 mm / 300 mm
• 主軸偏擺 ≤ 0.003 mm

透過鏟花工藝建立均勻承載點分布，提升接觸面貼合性與儲油潤滑效果，降低摩擦與磨耗。

再經由嚴格的幾何精度量測與主軸檢驗，確保機台具備穩定的加工精度與長期可靠性。

真正的精度，不是來自單一零件。
而是每一個細節累積而成的結果。

The Art of Machine Precision

---

The Art of Machine Precision
Machine accuracy is not achieved by design alone.

It is built through every assembly, adjustment, and inspection process.

Key precision control procedures include:
• Precision Hand Scraping
• 17–23 Bearing Contact Points per in²
• Oil Pocket Depth: 0.05–0.08 mm
• Base Verticality: ≤ 0.005 mm
• Angular Alignment: ±0.003 mm / 300 mm
• Spindle Runout: ≤ 0.003 mm

Hand scraping creates uniform bearing contact, improves lubrication retention, and enhances long-term machine stability.

Combined with rigorous geometric inspection and spindle verification, every machine is built to deliver reliable machining accuracy.

Precision is not a specification.
It is the result of every detail.



Contact information:
https://linktr.ee/MYLAS_MACHINERY

21/07/2026

一個孔位偏差，就可能影響整套液壓系統。

液壓閥體負責控制系統的壓力、流量與流動方向。這件 316 不鏽鋼精密液壓閥體，透過 MYLAS CNC 車銑複合加工，整合車削、定位鑽、階梯鑽、精密鑽孔與銑削製程。
從多段孔徑、深孔與小徑孔，到交叉流道及精密座面，每一道工序都考驗孔位精度、同軸度、切屑控制與製程穩定性。

316 不鏽鋼容易產生加工硬化、連續切屑與刀具磨耗。孔位偏差、內部毛邊或殘留切屑，都可能影響密封效果、流體控制及液壓系統的可靠性。

透過 CNC 車銑複合加工將多道工序集中於同一製程，可減少重複裝夾與跨機台轉序，進一步：
• 降低累積誤差與人工作業風險
• 提升關鍵特徵的相對精度
• 改善批量生產一致性
• 強化製程與交期穩定性

這類液壓閥體可應用於工業自動化、CNC 工具機、工程機械、航太液壓系統、船舶及耐腐蝕流體控制設備。

當液壓系統結合壓力、溫度、流量與振動感測器，設備數據還能支援異常偵測、故障診斷與預知保養，協助降低非預期停機風險。

對量產加工而言，重點不只是完成一件合格零件，而是讓每一批產品都維持一致的精度與穩定性。

AI 讓設備更聰明，精密加工讓控制更可靠。

One hole-position error can affect an entire hydraulic system.

A hydraulic valve body controls the pressure, flow rate, and flow direction of the system. This 316 stainless steel precision hydraulic valve body is machined using MYLAS CNC Turn-Mill technology, integrating turning, spot drilling, step drilling, precision drilling, and milling in one setup.

From multi-diameter bores and deep holes to intersecting flow passages and precision valve seats, every operation demands accurate positioning, concentricity, effective chip control, and stable machining performance.

Machining 316 stainless steel involves challenges such as work hardening, continuous chip formation, and tool wear. Hole-position errors, internal burrs, or residual chips can affect sealing performance, fluid control, and overall system reliability.

By consolidating multiple operations into one setup, CNC Turn-Mill machining helps:
• Reduce accumulated setup errors and manual handling risks
• Improve feature-to-feature accuracy
• Maintain consistent quality across production batches
• Support stable production and reliable delivery

These hydraulic valve bodies are used in industrial automation, CNC machine tools, construction machinery, aerospace hydraulic systems, marine equipment, and corrosion-resistant fluid-control applications.

When hydraulic systems are integrated with pressure, temperature, flow, and vibration sensors, operating data can support anomaly detection, fault diagnosis, and predictive maintenance—helping reduce unplanned downtime.

For production machining, the goal is not simply to produce one qualified part. It is to maintain consistent accuracy and process stability across every batch.

AI makes equipment smarter. Precision machining makes control more reliable.



Contact information:
https://linktr.ee/MYLAS_MACHINERY

10/07/2026

CNC自製動力刀座的完整製程，從培林安裝、齒輪傳動、油封密封到潤滑與最終偏擺檢驗。

透過自製動力刀座進行品質控管，確保每一道組裝工序皆符合精度要求。

每一道組裝工序都影響整體性能，透過精密控制，確保：
✔ 低偏擺（Low Runout，≤ 2μm）
✔ 高剛性（High Rigidity）
✔ 穩定傳動（Stable Transmission）

偏擺精度嚴格控制於 2μm 以內，以確保加工穩定性與品質一致性。

適用於高精度車銑複合加工與長時間穩定量產需求。

The complete assembly process of a custom CNC live tool holder, from bearing installation and gear transmission to oil seal assembly, lubrication, and final runout inspection.

By leveraging in-house custom live tool holders for quality control, every assembly step is precisely managed to meet strict accuracy standards.

Every assembly step directly impacts overall performance.
Through precise control, we ensure:
✔ Low Runout (≤ 2μm)
✔ High Rigidity
✔ Stable Transmission

Runout is strictly maintained within 2 microns, ensuring consistent machining quality and stability.

Designed for high-precision turn-mill applications and long-term stable mass production.



Contact information:
https://linktr.ee/MYLAS_MACHINERY

CNC 平面工作台動態精度怎麼看？將千分表固定於主軸，沿工作台進行全行程量測，透過實際運動軌跡，直接檢驗機台在運轉狀態下的精度表現，而不僅限於靜態數據。 量測過程中，可同時觀察工作台的平面度、移動中的平行度變化，以及機構在連續運動下的整體穩...
06/07/2026

CNC 平面工作台動態精度怎麼看？

將千分表固定於主軸，沿工作台進行全行程量測，透過實際運動軌跡，直接檢驗機台在運轉狀態下的精度表現，而不僅限於靜態數據。

量測過程中，可同時觀察工作台的平面度、移動中的平行度變化，以及機構在連續運動下的整體穩定性。相較靜態量測，此方式更貼近實際加工條件，也更能反映真實的加工精度。

📏 實測 0.003 mm，相較標準 0.005 mm

代表精度具備一定餘裕，可有效降低長時間運轉所累積的誤差，並在批量加工中維持更高的一致性與穩定性。

How to Evaluate Dynamic Flatness Accuracy of a CNC Table

A dial indicator is mounted on the spindle and moved across the full table travel, capturing machine accuracy under real motion conditions rather than static inspection.

This method allows simultaneous evaluation of table flatness, parallelism during movement, and overall structural stability.

Compared to static measurement, it provides a more realistic reflection of actual machining performance.

📏 Measured: 0.003 mm (Standard: 0.005 mm)

The result indicates an available accuracy margin, helping reduce cumulative error during long-running operations and ensuring better consistency in mass production.

#動態精度 #平面精度 #加工穩定性 #量產能力


Contact information:
https://linktr.ee/MYLAS_MACHINERY

25/06/2026

重切削正在進行中，
但這杯水，依然穩定不動。

就像 Lexus LS 的水杯測試，
用最直覺的方式驗證穩定性。

透過堆疊水杯結合重車削，
直接檢驗主軸穩定性與床台剛性。

水沒灑、杯沒倒，
加工穩定完成。

沒有多餘震動，
才能創造真正可靠的加工精度。

Heavy cutting is in progress,
yet the water remains completely still.

Just like the classic Lexus LS water glass test,
it provides the most intuitive proof of stability.

By stacking water cups during an actual heavy turning process,
we directly evaluate spindle stability and machine bed rigidity.

No spills. No movement.
Machining remains stable throughout.

Without unnecessary vibration,
true and reliable machining accuracy can be achieved.






Contact information:
https://linktr.ee/MYLAS_MACHINERY

龍舟開划，粽子開吃，連假開跑。平常忙著把事情做好，這幾天就先把自己顧好。吃粽子、睡飽一點、陪重要的人，或單純什麼都不做，也很可以。願大家都像浮世繪裡的龍舟，有浪、有風，也有自己的節奏。端午節快樂，平安順心！粽子包緊就好，壓力先不用。📌 6/...
19/06/2026

龍舟開划，粽子開吃，連假開跑。
平常忙著把事情做好，
這幾天就先把自己顧好。

吃粽子、睡飽一點、陪重要的人，
或單純什麼都不做，也很可以。

願大家都像浮世繪裡的龍舟，
有浪、有風，也有自己的節奏。
端午節快樂，平安順心！

粽子包緊就好，壓力先不用。

📌 6/19（五）– 6/21（日）端午休假
假期後恢復正常服務，造成不便，敬請見諒。

Dragon boats are ready, zongzi is ready, and so are we for the long weekend.

We’re usually busy getting things done,
so these few days are for slowing down a bit.

Eat well, sleep more,
spend time with your favorite people,
or do absolutely nothing.

Honestly, that counts too.
Hope everyone enjoys the holiday at their own pace,
just like a dragon boat riding through a ukiyo-e wave.

Happy Dragon Boat Festival!
Keep the zongzi wrapped tight,
but leave the stress out of it.

📌 Holiday Notice
We will be closed from June 19 (Fri.) to June 21 (Sun.).
Regular service will resume after the holiday.
Sorry for any inconvenience caused.

#端午節快樂 #龍舟 #浮世繪 #休假公告 #連假開跑 #壓力先不用

Address

No. 40, E. 3rd Lane , Xingfeng Villa, Tanzi Dist.
Taichung
427

Opening Hours

Monday 08:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 08:00 - 17:00

Telephone

＋886-4-25377564

Website

Alerts

Be the first to know and let us send you an email when 名陽機械股份有公司 MYLAS Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 名陽機械股份有公司 MYLAS Machinery:

Shortcuts

Share

Category