เว็บไซต์คืออะไร?

https://www.facebook.com/104146428645676/

CR Asia Group

Name: CR Asia Group
Address: 15/1 Moo 3, Bankoh/Mabkha Road, T. Mabkha, Nikompattana, Rayong, 21180, TH
Telephone: +6638698399

โทร เส้นทาง

ข้อมูลติดต่อ แผนที่และเส้นทาง แบบฟอร์มติดต่อ เวลาทำการ บริการ คะแนนรีวิว รูปภาพ วิดีโอ และข่าวสารจาก CR Asia Group, บริการด้านวิศวกรรม, 15/1 Moo 3, Bankoh/Mabkha Road, T. Mabkha, Nikompattana, Rayong

14/10/2026

Our Group Projects Director, Callum Smith, will present at the upcoming ADIPEC 2026 alongside Clint Arnold, Director of Reactor Solutions at ZymeFlow.

Their talk covers how specialist decontamination chemistry and CR3's Eco-Hydrodrilling remove hardened catalyst from refinery reactors, making catalyst replacement safer, faster, and more sustainable.

If you're attending, add it to your schedule:
Tuesday 3 November, 15:00–15:20
Session 6, Capital Suite 15

Swipe through for the full session details.

06/10/2026

Our CR3 India team has completed maintenance on five pumps on a Crude Distillation Unit at a refinery in western India, returning each one to service ahead of the client's planned schedule.

The scope covered mechanical seal and bearing replacements and full pump overhauls on pumps in critical hydrocarbon transfer and circulation services.

In total, the team completed 24 planned days of work in 18, a 25% reduction against plan. These pumps keep feed moving to downstream units and help hold process conditions stable, so every day out of service counts.

In their letter of appreciation, the client noted the team's "𝘤𝘰𝘮𝘮𝘦𝘯𝘥𝘢𝘣𝘭𝘦 𝘧𝘰𝘤𝘶𝘴 𝘢𝘯𝘥 𝘸𝘰𝘳𝘬𝘮𝘢𝘯𝘴𝘩𝘪𝘱" and said their efforts set "𝘢 𝘱𝘰𝘴𝘪𝘵𝘪𝘷𝘦 𝘦𝘹𝘢𝘮𝘱𝘭𝘦 𝘧𝘰𝘳 𝘢𝘤𝘩𝘪𝘦𝘷𝘪𝘯𝘨 𝘴𝘢𝘧𝘦, 𝘳𝘦𝘭𝘪𝘢𝘣𝘭𝘦, 𝘢𝘯𝘥 𝘳𝘪𝘨𝘩𝘵-𝘧𝘪𝘳𝘴𝘵-𝘵𝘪𝘮𝘦 𝘮𝘢𝘪𝘯𝘵𝘦𝘯𝘢𝘯𝘤𝘦 𝘦𝘹𝘦𝘤𝘶𝘵𝘪𝘰𝘯."

Thank you to everyone involved, from planning and engineering to ex*****on, safety, operations and our site partners.

We also thank our client for their recognition and their continued trust in our team.

29/09/2026

𝗧𝗮𝗸𝗶𝗻𝗴 𝗽𝗲𝗼𝗽𝗹𝗲 𝗼𝘂𝘁 𝗼𝗳 𝘁𝗵𝗲 𝗿𝗲𝗮𝗰𝘁𝗼𝗿, 𝗻𝗼𝘁 𝗼𝗳𝗳 𝘁𝗵𝗲 𝘀𝗰𝗵𝗲𝗱𝘂𝗹𝗲

Catalyst handling on offshore platforms is among the more hazardous jobs in our industry. On a recent project for a multinational oil and gas operator, two mercury removal units required a full catalyst change-out, in confined spaces contaminated with mercury, arsenic and other toxins.

Historically, catalyst removal from vessels like these has meant sending people into confined, contaminated spaces. Robotic handling removes that need. On this project, we completed the work without a single confined-space entry.

We deployed our Zone-rated CR3 Rover, custom-engineered to fit the 20-inch manways. Fitted with pneumatic extraction tools and an explosion-proof camera, our team operated and monitored the Rover in real time from a safe distance.

The catalyst was removed with zero personnel entry, the platform kept running, and the maintenance window stayed on track.

As regulators tighten the rules on human exposure in hazardous environments, robotic catalyst handling is moving from a specialist option to standard practice. CR3 operates a fleet of purpose-built Rovers built for exactly this work.

21/09/2026

CR3 is deeply saddened by the passing of the late Sheikh Ahmed bin Rashid Al Maktoum.

We extend our sincere condolences to His Highness Sheikh Mohammed bin Rashid Al Maktoum, Vice President and Prime Minister of the UAE and Ruler of Dubai, and to the Al Maktoum family.

Having worked across the region for many years, we hold deep respect for the leadership of Dubai and the United Arab Emirates, and for Sheikh Ahmed's long service to the emirate and its people.

إِنَّا لِلَّٰهِ وَإِنَّا إِلَيْهِ رَاجِعُونَ

Inna lillahi wa inna ilayhi raji'un.

To God we belong, and to Him we shall return.

15/09/2026

𝗣𝗿𝗲𝗰𝗶𝘀𝗶𝗼𝗻 𝗖𝘂𝘁𝘁𝗶𝗻𝗴 𝗼𝗻 𝘁𝗵𝗲 𝗖𝗿𝗶𝘁𝗶𝗰𝗮𝗹 𝗣𝗮𝘁𝗵

A refinery client in Singapore needed critical static equipment removed during a scheduled turnaround, with the cutting scope sitting on the project's critical path. The plenum, primary cyclones and secondary cyclones all required precise cuts so replacement equipment could be installed without adjustment.

CR3 combined diamond wire and hydro-abrasive cutting methods, using guides and magnetic track systems to control material loss and maintain precision. Nozzles were positioned at agreed angles to reduce the bevel preparation needed by the downstream mechanical contractor.

The attached case study covers the full scope, cutting methods, and outcomes for the client.

10/09/2026

𝗡𝗲𝗮𝗿𝗹𝘆 𝘁𝗵𝗿𝗲𝗲 𝘆𝗲𝗮𝗿𝘀 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗮 𝗹𝗼𝘀𝘁-𝘁𝗶𝗺𝗲 𝗶𝗻𝗷𝘂𝗿𝘆.

That's what CR3 Malaysia has just marked, alongside passing 2 million safe working hours, the latest milestone in a safety record that spans every region we operate in.

The achievement was recognised across all of CR3's operations in Malaysia, with teams at every location marking the occasion.

"𝘛𝘸𝘰 𝘮𝘪𝘭𝘭𝘪𝘰𝘯 𝘴𝘢𝘧𝘦 𝘸𝘰𝘳𝘬𝘪𝘯𝘨 𝘩𝘰𝘶𝘳𝘴 𝘥𝘰𝘯'𝘵 𝘩𝘢𝘱𝘱𝘦𝘯 𝘣𝘺 𝘤𝘩𝘢𝘯𝘤𝘦; 𝘵𝘩𝘦𝘺 𝘩𝘢𝘱𝘱𝘦𝘯 𝘣𝘦𝘤𝘢𝘶𝘴𝘦 𝘦𝘷𝘦𝘳𝘺 𝘵𝘦𝘢𝘮 𝘮𝘦𝘮𝘣𝘦𝘳 𝘶𝘯𝘥𝘦𝘳𝘴𝘵𝘢𝘯𝘥𝘴 𝘵𝘩𝘦 𝘧𝘰𝘤𝘶𝘴 𝘰𝘯 𝘱𝘳𝘰𝘢𝘤𝘵𝘪𝘷𝘦 𝘴𝘢𝘧𝘦𝘵𝘺 𝘮𝘢𝘯𝘢𝘨𝘦𝘮𝘦𝘯𝘵 𝘢𝘯𝘥 𝘤𝘰𝘮𝘮𝘪𝘵𝘴 𝘵𝘰 𝘸𝘰𝘳𝘬𝘪𝘯𝘨 𝘦𝘢𝘤𝘩 𝘢𝘯𝘥 𝘦𝘷𝘦𝘳𝘺 𝘴𝘩𝘪𝘧𝘵 𝘴𝘢𝘧𝘦𝘭𝘺. 𝘛𝘩𝘢𝘵'𝘴 𝘸𝘩𝘢𝘵 𝘴𝘩𝘰𝘸𝘴 𝘶𝘱 𝘪𝘯 𝘢 𝘯𝘶𝘮𝘣𝘦𝘳 𝘭𝘪𝘬𝘦 𝘵𝘩𝘪𝘴. 𝘐𝘵 𝘴𝘩𝘰𝘸𝘴 𝘮𝘰𝘳𝘦 𝘪𝘯 𝘩𝘰𝘸 𝘵𝘩𝘦 𝘵𝘦𝘢𝘮 𝘸𝘰𝘳𝘬𝘴 𝘥𝘢𝘺 𝘵𝘰 𝘥𝘢𝘺."

- 𝗚𝗮𝘃𝗶𝗻 𝗔𝗺𝗲𝘀, 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗠𝗮𝗻𝗮𝗴𝗲𝗿, 𝗠𝗮𝗹𝗮𝘆𝘀𝗶𝗮, 𝗧𝗵𝗮𝗶𝗹𝗮𝗻𝗱 𝗮𝗻𝗱 𝗩𝗶𝗲𝘁𝗻𝗮𝗺

"𝘙𝘦𝘢𝘤𝘩𝘪𝘯𝘨 𝘵𝘩𝘪𝘴 𝘴𝘵𝘢𝘯𝘥𝘢𝘳𝘥 𝘢𝘭𝘰𝘯𝘨𝘴𝘪𝘥𝘦 𝘰𝘶𝘳 𝘰𝘵𝘩𝘦𝘳 𝘳𝘦𝘨𝘪𝘰𝘯𝘴 𝘪𝘴 𝘢 𝘳𝘦𝘢𝘭 𝘤𝘳𝘦𝘥𝘪𝘵 𝘵𝘰 𝘵𝘩𝘦 𝘵𝘦𝘢𝘮. 𝘐'𝘮 𝘱𝘳𝘰𝘶𝘥 𝘰𝘧 𝘸𝘩𝘢𝘵 𝘵𝘩𝘦𝘺'𝘷𝘦 𝘣𝘶𝘪𝘭𝘵 𝘩𝘦𝘳𝘦, 𝘢𝘯𝘥 𝘰𝘶𝘳 𝘧𝘰𝘤𝘶𝘴 𝘯𝘰𝘸 𝘪𝘴 𝘰𝘯 𝘮𝘢𝘪𝘯𝘵𝘢𝘪𝘯𝘪𝘯𝘨 𝘵𝘩𝘪𝘴 𝘮𝘰𝘮𝘦𝘯𝘵𝘶𝘮 𝘢𝘴 𝘸𝘦 𝘸𝘰𝘳𝘬 𝘵𝘰𝘸𝘢𝘳𝘥𝘴 𝘵𝘩𝘦 𝘯𝘦𝘹𝘵 𝘵𝘢𝘳𝘨𝘦𝘵."

- 𝗗𝗲𝘄𝗮𝗹𝗱 𝗣𝗶𝗲𝘁𝗲𝗿𝘀𝗲, 𝗛𝗦𝗘 𝗠𝗮𝗻𝗮𝗴𝗲𝗿, 𝗖𝗥𝟯 𝗠𝗮𝗹𝗮𝘆𝘀𝗶𝗮

Well done to the whole Malaysia team, and thank you to our customers there for their continued support and partnership in safe operations.

While this achievement centres on Malaysia, the safety systems and culture behind it are applied consistently across CR3's regions - from Thailand and Singapore to India, Vietnam, and the Middle East.

The same standards, procedures, and reporting discipline operate group-wide, so this result reflects how CR3 works everywhere, not just in one market.

08/09/2026

CR3 Malaysia is now an ECITB-approved training provider, having completed Levels 1 to 3 for mechanical joint integrity training covering hand torquing, hydraulic torquing, and hydraulic tensioning.

Malaysia is the fourth CR3 operation to achieve ECITB approval, following Thailand, India, and Singapore. This extends accredited training capability across four of CR3's operations.

ECITB approval confirms that a training provider meets the Engineering Construction Industry Training Board's standards for delivering technical training and qualifications. Completing Levels 1 to 3 means CR3 Malaysia can now deliver the full progression of this training in-country, from foundation through to advanced competency.

Our trainers in Malaysia deliver hands-on programmes in mechanical joint assembly, giving personnel the skills to carry out these techniques safely and to the required standard.

"𝘛𝘩𝘪𝘴 𝘪𝘴 𝘢 𝘳𝘦𝘢𝘭 𝘮𝘪𝘭𝘦𝘴𝘵𝘰𝘯𝘦 𝘧𝘰𝘳 𝘵𝘩𝘦 𝘵𝘦𝘢𝘮 𝘪𝘯 𝘔𝘢𝘭𝘢𝘺𝘴𝘪𝘢. 𝘙𝘦𝘢𝘤𝘩𝘪𝘯𝘨 𝘌𝘊𝘐𝘛𝘉 𝘢𝘱𝘱𝘳𝘰𝘷𝘢𝘭 𝘢𝘯𝘥 𝘤𝘰𝘮𝘱𝘭𝘦𝘵𝘪𝘯𝘨 𝘓𝘦𝘷𝘦𝘭𝘴 1 𝘵𝘰 3 𝘮𝘦𝘢𝘯𝘴 𝘸𝘦 𝘤𝘢𝘯 𝘯𝘰𝘸 𝘵𝘳𝘢𝘪𝘯 𝘯𝘰𝘵 𝘫𝘶𝘴𝘵 𝘰𝘶𝘳 𝘰𝘸𝘯 𝘱𝘦𝘰𝘱𝘭𝘦, 𝘣𝘶𝘵 𝘤𝘭𝘪𝘦𝘯𝘵𝘴 𝘢𝘤𝘳𝘰𝘴𝘴 𝘵𝘩𝘦 𝘪𝘯𝘥𝘶𝘴𝘵𝘳𝘺 𝘸𝘩𝘰 𝘯𝘦𝘦𝘥 𝘌𝘊𝘐𝘛𝘉-𝘤𝘦𝘳𝘵𝘪𝘧𝘪𝘦𝘥 𝘴𝘬𝘪𝘭𝘭𝘴."

— Michael Velders, Area Manager, CR3 Malaysia

Contact us to learn more about our ECITB-approved training courses in Malaysia.

01/09/2026

𝗪𝗵𝗲𝗻 𝗮𝗻 𝗶𝗻𝗱𝘂𝘀𝘁𝗿𝗶𝗮𝗹 𝗴𝗮𝘀 𝗽𝗿𝗼𝗱𝘂𝗰𝗲𝗿 𝗶𝗻 𝗠𝗮𝗹𝗮𝘆𝘀𝗶𝗮 𝗳𝗼𝘂𝗻𝗱 𝗮 𝘀𝘂𝗽𝗽𝗼𝗿𝘁 𝗴𝗿𝗶𝗱 𝗺𝗶𝘀𝘀𝗶𝗻𝗴 𝗳𝗿𝗼𝗺 𝘁𝗵𝗲 𝘁𝗼𝗽 𝗼𝗳 𝗮 𝗰𝗮𝘁𝗮𝗹𝘆𝘀𝘁 𝗯𝗲𝗱, 𝘁𝗵𝗲𝘆 𝗻𝗲𝗲𝗱𝗲𝗱 𝗮 𝘁𝗲𝗮𝗺 𝗼𝗻 𝘀𝗶𝘁𝗲 𝗳𝗮𝘀𝘁.

Our CR3 Malaysia team mobilised within a day of the callout. On inspection, they found the grid and three sets of wire mesh buried within the bed.

The team unloaded the catalyst and inspected the top and bottom mesh. With the vessel cleared and checked, they reloaded to the approved loading diagram, reinstalled three layers of mesh, and completed the support grid installation before handing the reactor back for box-up.

We delivered the full scope in two days, safely and on schedule. The client was impressed with our response time, ex*****on and result.

Unplanned catalyst work needs a team that can mobilise fast and get the details right. CR3 does both, which is why operators have trusted us with their reactors for over three decades.

24/08/2026

𝗢𝗻 𝟭𝟱 𝗔𝘂𝗴𝘂𝘀𝘁, 𝗼𝘂𝗿 𝘁𝗲𝗮𝗺𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗖𝗥𝟯 𝗜𝗻𝗱𝗶𝗮 𝗰𝗮𝗺𝗲 𝘁𝗼𝗴𝗲𝘁𝗵𝗲𝗿 𝘁𝗼 𝗺𝗮𝗿𝗸 𝗜𝗻𝗱𝗲𝗽𝗲𝗻𝗱𝗲𝗻𝗰𝗲 𝗗𝗮𝘆.

The day marks the anniversary of 15 August 1947, when India gained independence after nearly two centuries of British colonial rule. It is observed each year with flag hoisting, the national anthem, and remembrance of those who worked towards independence.

Our own celebrations began with the flag hoisting at our offices and operations yards, as colleagues stood together for the unfurling of the tricolour and the national anthem.

The CR3 offices were decorated for the occasion, and the day continued with a cake cutting and a few party games, with everyone getting into the spirit.

It was a good moment to step away from the day-to-day, come together as a team, and mark the occasion.

18/08/2026

𝗕𝗲𝘁𝘄𝗲𝗲𝗻 𝗗𝗲𝗰𝗲𝗺𝗯𝗲𝗿 𝗮𝗻𝗱 𝗝𝘂𝗻𝗲, 𝗖𝗥𝟯 𝗜𝗻𝗱𝗶𝗮 𝗿𝗲𝗰𝗼𝗿𝗱𝗲𝗱 𝟭𝟬 𝗺𝗶𝗹𝗹𝗶𝗼𝗻 𝘀𝗮𝗳𝗲 𝘄𝗼𝗿𝗸𝗶𝗻𝗴 𝗵𝗼𝘂𝗿𝘀 𝘄𝗶𝘁𝗵 𝗻𝗼 𝗟𝗼𝘀𝘁 𝗧𝗶𝗺𝗲 𝗜𝗻𝗷𝘂𝗿𝗶𝗲𝘀 (𝗟𝗧𝗜𝘀).

That figure reflects consistent, careful work by our employees, contractors, clients, and partners. It reflects a safety culture where people take responsibility for doing the job properly and looking out for one another.

Behind the number are countless everyday decisions: someone stopping to flag a hazard, checking a procedure, or speaking up when something didn't look right. That is what keeps people safe.

Project teams across our sites marked the milestone together, taking a moment to recognise the shared effort behind it.

Thank you to everyone who played a part. We're proud of what the team has built, and we stay focused on the goal that matters most: everyone going home safe at the end of every shift.

Well done to the entire CR3 India team.

ที่อยู่

15/1 Moo 3, Bankoh/Mabkha Road, T. Mabkha, Nikompattana
Rayong
21180

เบอร์โทรศัพท์

+6638698399

เว็บไซต์

facebook.com

แจ้งเตือน

เป็นคนแรกที่รู้ข่าว: เราจะส่งอีเมลแจ้งเมื่อ CR Asia Group โพสต์ข่าวสารและโปรโมชั่น อีเมลของคุณจะไม่ถูกนำไปใช้เพื่อวัตถุประสงค์อื่น และคุณสามารถยกเลิกการรับข่าวสารได้ทุกเมื่อ

ต้องการให้ธุรกิจของคุณขึ้นเป็นอันดับหนึ่งในหมวด บริการอุปกรณ์ ที่ Rayong หรือไม่?

แชร์

หมวดหมู่

บริการด้านวิศวกรรม