07/03/2025
๐ก๐ณ ๐ฟ๐ฒ๐ฎ๐๐ผ๐ป๐ ๐ฝ๐น๐ฎ๐๐บ๐ฎ ๐ฏ๐ฒ๐ฎ๐๐ ๐ผ๐
๐๐ณ๐๐ฒ๐นโจ
๐ญ. ๐๐ฒ๐๐๐ฒ๐ฟ ๐ฐ๐๐ ๐พ๐๐ฎ๐น๐ถ๐๐
Plasma cuts have less dross, less warping, and a smaller heat-affected zone.
๐ฎ. ๐๐๐๐ ๐บ๐ผ๐ฟ๐ฒ ๐ฝ๐ฎ๐ฟ๐๐ ๐ณ๐ฎ๐๐๐ฒ๐ฟ
With significantly faster cut speeds, plasma outperforms oxyfuel even before you consider oxyfuelโs preheat time and secondary operations.
๐ฏ. ๐ฃ๐ฎ๐ฟ๐๐ ๐ฐ๐ผ๐๐ ๐น๐ฒ๐๐
With operating costs spread over more parts per hour, and with less time spent on secondary operations, you have a lower cost per part.
๐ฐ. ๐ ๐ผ๐ฟ๐ฒ ๐ฝ๐ฟ๐ผ๐ณ๐ถ๐๐ฎ๐ฏ๐น๐ฒ
Lower operating costs and greater productivity result in more profit for you.
๐ฑ. ๐๐ฎ๐๐ถ๐ฒ๐ฟ ๐๐ผ ๐๐๐ฒ
No gases to regulate, no flame chemistry to master. And thereโs no standoff to maintain. torches are designed for dragging the torch across the plate.
๐ฒ. ๐๐ป๐ฐ๐ฟ๐ฒ๐ฎ๐๐ฒ๐ฑ ๐ณ๐น๐ฒ๐
๐ถ๐ฏ๐ถ๐น๐ถ๐๐
Cut mild steel, aluminum, stainless, copper, and most other metals. Cut by hand, with a track or pipe cutter, or on an X-Y table. Cut stacked metal, metal grate, or even rusty or painted pieces.
๐ณ. ๐จ๐๐ฒ๐ ๐ผ๐ป๐น๐ ๐ฎ๐ถ๐ฟ ๐ณ๐ผ๐ฟ ๐ถ๐บ๐ฝ๐ฟ๐ผ๐๐ฒ๐ฑ ๐๐ฎ๐ณ๐ฒ๐y
No flammable gases required. With Powermax systems, compressed air is the only gas you need. The most popular fuel gas for oxyfuel is acetylene, a highly flammable and unstable gas.
๐พ๐ง๐๐๐ฉ๐๐ ๐๐ฎ ๐๐ก๐๐๐ฉ๐ง๐๐๐๐ก๐ก๐ฎ ๐๐๐๐ง๐๐๐ฃ๐ ๐ ๐๐๐จ, ๐ฅ๐ก๐๐จ๐ข๐ ๐ข๐๐๐ ๐๐ง๐ค๐ข ๐๐ค๐ข๐ฅ๐ง๐๐จ๐จ๐๐ ๐๐๐ง ๐๐๐ฃ ๐๐ช๐ฉ ๐ข๐๐ฉ๐๐ก๐จ ๐ช๐ฅ ๐ฉ๐ค 56 ๐ข๐ข (2-1/4") ๐ฉ๐๐๐๐ . ๐๐ค๐ฌ๐๐ง๐ข๐๐ญยฎ ๐จ๐ฎ๐จ๐ฉ๐๐ข๐จ ๐๐ง๐ ๐๐๐จ๐ฎ ๐ฉ๐ค ๐ช๐จ๐ ๐๐ฃ๐ ๐ฅ๐ค๐ง๐ฉ๐๐๐ก๐, ๐ฌ๐๐ฉ๐ ๐๐๐จ๐ฉ๐๐ง ๐๐ช๐ฉ ๐จ๐ฅ๐๐๐๐จ ๐ฉ๐๐๐ฃ ๐ค๐ญ๐ฎ๐๐ช๐๐ก.
๐ฅ๐ฒ๐ฎ๐ฑ๐ ๐๐ผ ๐ฐ๐๐ ๐ฏ๐ฒ๐๐๐ฒ๐ฟ, ๐ณ๐ฎ๐๐๐ฒ๐ฟ, ๐ฎ๐ป๐ฑ ๐๐ฎ๐ณ๐ฒ๐ฟ? ๐จ๐ฝ๐ด๐ฟ๐ฎ๐ฑ๐ฒ ๐๐ผ ๐ฃ๐น๐ฎ๐๐บ๐ฎ ๐๐ผ๐ฑ๐ฎ๐! โ๏ธ๐ฅ
