Corsmed, Lund (2026)

24/08/2026

🧠 𝗛𝗼𝘄 𝘁𝗼 𝗣𝗹𝗮𝗻 𝗮𝗻 𝗠𝗥𝗖𝗣 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗩𝗶𝗱𝗲𝗼 𝗚𝘂𝗶𝗱𝗲

MRCP is all about visualizing the biliary and pancreatic ducts clearly — while controlling one of abdominal MRI’s biggest challenges: motion.

This video tutorial walks you through a complete MRCP protocol, from anatomical imaging to 3D duct imaging and fast breath-hold acquisitions.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:
1. Plan a 3D MRCP to clearly visualize the biliary and pancreatic duct systems
2. Choose between respiratory-triggered and breath-hold sequences
3. Optimize resolution, SNR, and scan time

🧑🏻‍⚕️ 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗳𝗼𝗿 𝗠𝗥𝗜 𝘀𝘁𝘂𝗱𝗲𝗻𝘁𝘀, 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝘀𝘁𝘀, 𝗮𝗻𝗱 𝗿𝗮𝗱𝗶𝗼𝗴𝗿𝗮𝗽𝗵𝗲𝗿𝘀:
If you’re learning abdominal MRI or refining your MRCP skills, this tutorial will help you understand the sequences, motion-control strategies, and planning needed for high-quality imaging.

💼 𝗦𝘁𝗮𝘆 𝗮𝗵𝗲𝗮𝗱 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗠𝗥𝗜 𝗰𝗮𝗿𝗲𝗲𝗿. 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲 𝘁𝗼 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗲𝘅𝗽𝗲𝗿𝘁 𝗠𝗥𝗜 𝘁𝘂𝘁𝗼𝗿𝗶𝗮𝗹𝘀!

20/08/2026

🦵🏼 𝗛𝗼𝘄 𝘁𝗼 𝗣𝗹𝗮𝗻 𝗮 𝗞𝗻𝗲𝗲 𝗠𝗥𝗜 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗩𝗶𝗱𝗲𝗼 𝗚𝘂𝗶𝗱𝗲

Good knee MRIs start with accurate slice planning, angulation, and sequence setup.

This tutorial walks through a complete routine knee MRI protocol, including PD fat-sat, T1, T2, and dedicated ACL imaging.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:
1. Plan axial, sagittal, and coronal slices using key anatomical landmarks
2. Optimize PD fat-sat, T1, and T2 sequences for clear tissue contrast
3. Plan dedicated high-resolution ACL views for precise ligament assessment

🧑🏻‍⚕️ 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗳𝗼𝗿 𝗠𝗥𝗜 𝘀𝘁𝘂𝗱𝗲𝗻𝘁𝘀, 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝘀𝘁𝘀, 𝗮𝗻𝗱 𝗿𝗮𝗱𝗶𝗼𝗴𝗿𝗮𝗽𝗵𝗲𝗿𝘀:

Build confidence in knee MRI planning and learn the key steps needed for consistent, high-quality imaging.

💼 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲 𝘁𝗼 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗲𝘅𝗽𝗲𝗿𝘁 𝗠𝗥𝗜 𝘁𝘂𝘁𝗼𝗿𝗶𝗮𝗹𝘀!

20/08/2026

🧠 𝗛𝗼𝘄 𝘁𝗼 𝗣𝗹𝗮𝗻 𝗮𝗻 𝗜𝗔𝗖/𝗜𝗔𝗠 𝗠𝗥𝗜 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗩𝗶𝗱𝗲𝗼 𝗚𝘂𝗶𝗱𝗲

The internal auditory canals and inner ear contain tiny, delicate structures, so getting the planning, resolution, and sequence setup right is critical.

This video tutorial walks you through a complete IAC/IAM MRI protocol, from slice positioning and 3D imaging to contrast-enhanced sequences.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:
1. Plan axial and coronal slices for accurate IAC/IAM coverage and angulation
2. Use high-resolution 3D sequences to visualize the cranial nerves and inner-ear structures
3. Balance spatial resolution, SNR, and scan time while reducing common artifacts

🧑🏻‍⚕️ 𝗣𝗲𝗿𝗳𝗲𝗰𝘁 𝗳𝗼𝗿 𝗠𝗥𝗜 𝘀𝘁𝘂𝗱𝗲𝗻𝘁𝘀, 𝘁𝗲𝗰𝗵𝗻𝗼𝗹𝗼𝗴𝗶𝘀𝘁𝘀, 𝗮𝗻𝗱 𝗿𝗮𝗱𝗶𝗼𝗴𝗿𝗮𝗽𝗵𝗲𝗿𝘀:
If you’re learning neuro MRI or refining your IAC/IAM scan planning skills, this tutorial will help you understand the key sequences, planning, and optimization needed for high-quality imaging.

💼 𝗦𝘁𝗮𝘆 𝗮𝗵𝗲𝗮𝗱 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗠𝗥𝗜 𝗰𝗮𝗿𝗲𝗲𝗿. 𝗦𝘂𝗯𝘀𝗰𝗿𝗶𝗯𝗲 𝘁𝗼 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗳𝗼𝗿 𝗺𝗼𝗿𝗲 𝗲𝘅𝗽𝗲𝗿𝘁 𝗠𝗥𝗜 𝘁𝘂𝘁𝗼𝗿𝗶𝗮𝗹𝘀!

27/07/2026

𝟮𝟱 𝘆𝗲𝗮𝗿𝘀 𝗮𝗴𝗼 𝘁𝗵𝗶𝘀 𝘄𝗲𝗲𝗸, 𝗠𝗥 𝘀𝗮𝗳𝗲𝘁𝘆 𝗮𝘀 𝘄𝗲 𝗸𝗻𝗼𝘄 𝗶𝘁 𝗱𝗶𝗱 𝗻𝗼𝘁 𝗲𝘅𝗶𝘀𝘁.

The physics was understood. Guidance had been published through the 1990s.

What was missing was a standard anyone was held to.

Then in July 2001, six-year-old Michael Colombini was struck by a steel oxygen cylinder that the magnet tore out of an anaesthesiologist's hands during his scan. He died two days later.

The ACR published its White Paper on MR Safety the following year. It gave the field the four zones, defined who counts as MR personnel, and turned access control from good practice into the expectation. Non-ferrous cylinders became the norm in MR departments. The last week of July became MR Safety Week.

That is 25 years of genuine progress, built by people who refused to let it happen twice.

But we can only maintain these standards with trained personnel. Every zone line and every screening question only holds if the person on shift understands the physics underneath it.

That's the part we work on.

ISMRT is running free virtual safety sessions all week, 27 to 31 July. Worth an hour of anyone's time.

To everyone keeping a scan room safe today: you're the reason the last 25 years worked. 🧲

03/07/2026

𝗢𝗻 𝘁𝗵𝗶𝘀 𝗱𝗮𝘆 𝗶𝗻 𝟭𝟵𝟳𝟳, 𝘁𝗵𝗲 𝗳𝗶𝗿𝘀𝘁 𝘄𝗵𝗼𝗹𝗲-𝗯𝗼𝗱𝘆 𝗠𝗥𝗜 𝘀𝗰𝗮𝗻 𝘄𝗮𝘀 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝗲𝗱.

Raymond Damadian and his team used their scanner "Indomitable" to capture the first complete human body image using magnetic resonance.

This five-hour scan proved MRI could visualize the entire human body non-invasively. It launched a revolution in medical imaging that now performs over 𝟭𝟬𝟬 𝗺𝗶𝗹𝗹𝗶𝗼𝗻 𝘀𝗰𝗮𝗻𝘀 𝗮𝗻𝗻𝘂𝗮𝗹𝗹𝘆 𝘄𝗼𝗿𝗹𝗱𝘄𝗶𝗱𝗲.

At Corsmed, our 𝗠𝗥𝗜 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗼𝗿 trains the professionals who continue this legacy of innovation.

Today, we celebrate the pioneers who made modern medical imaging possible! 🧲

21/06/2026

𝗠𝗮𝘀𝘁𝗲𝗿 𝗥𝗼𝘁𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗠𝗼𝘁𝗶𝗼𝗻 𝗔𝗿𝘁𝗶𝗳𝗮𝗰𝘁𝘀 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗘𝘅𝗽𝗹𝗮𝗻𝗮𝘁𝗶𝗼𝗻
EASY tutorial for beginners, students, and professional MRI technologists and radiographers.

🔗 𝗚𝗲𝘁 𝘁𝗵𝗲 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗠𝗥𝗜 𝗦𝗶𝗺𝘂𝗹𝗮𝘁𝗼𝗿:
https://www.corsmed.com/mri-simulator/for-individuals

Have you ever had a patient turn their head during a brain MRI scan?

In this video, we show exactly how rotational patient movement affects brain MRI images, why scanner timing matters, and how slice planning can help recover high-quality sagittal and coronal images.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:
1. Identify rotational motion artifacts in brain MRI images.
2. Understand why head rotation creates circular blur and ghosting.
3. See how rotational speed affects image acquisition.
4. Learn how TR controls how often the scanner checks the anatomy.
5. See why a perfectly timed TR can make a moving patient look still.

See more MRI guides at:
https://www.corsmed.com/learn/mri-protocols

DISCLAIMER:

This educational video is intended for training purposes only and demonstrates MRI scanning using the Corsmed MRI simulator. The techniques and protocols shown are for educational demonstration and may vary from clinical practice depending on your institution, scanner manufacturer, and specific patient needs.

This video does not constitute medical advice. Consult with qualified radiologists and follow established clinical guidelines for patient diagnosis and treatment.

Keywords: magnetic resonance imaging, brain MRI, rotational motion artifact, rotational motion artifact MRI, MRI head motion artifact, MRI motion artifact, MRI ghosting artifact, MRI circular blur, brain MRI artifact, head movement MRI, patient motion MRI, MRI timing, TR MRI, TE MRI, repetition time MRI, echo time MRI, MRI artifact reduction, MRI simulator practice, Corsmed MRI tutorial, MRI training for technologists

16/06/2026

𝗠𝗮𝘀𝘁𝗲𝗿 𝗥𝗲𝘀𝗽𝗶𝗿𝗮𝘁𝗼𝗿𝘆 𝗠𝗼𝘁𝗶𝗼𝗻 𝗔𝗿𝘁𝗶𝗳𝗮𝗰𝘁𝘀 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗘𝘅𝗽𝗹𝗮𝗻𝗮𝘁𝗶𝗼𝗻
EASY tutorial for beginners, students, and professional MRI technologists and radiographers.

🔗 𝗚𝗲𝘁 𝘁𝗵𝗲 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗠𝗥𝗜 𝗦𝗶𝗺𝘂𝗹𝗮𝘁𝗼𝗿:
https://www.corsmed.com/mri-simulator/for-individuals

Respiratory motion is one of the most common challenges in abdominal and chest MRI.

When a patient breathes during an un-gated scan, the anatomy moves during image acquisition.
This can create severe wave-like artifacts across the image and reduce diagnostic image quality.

In this video, we show exactly how breathing affects MRI images, why breath-hold instructions matter, and how respiratory gating helps create sharp and static abdominal images.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:

1. Identify respiratory motion artifacts in MRI images.
2. Understand why free breathing creates wave-like artifacts.
3. Compare breath-hold scans after exhale and inhale.
4. See how liver and lung position changes with breathing.
5. Understand why localizers must match the breathing mode of the full protocol.
6. Learn how respiratory gating reduces motion artifacts.
7. Compare free-breathing MRI with respiratory-gated MRI.

DISCLAIMER:

This educational video is intended for training purposes only and demonstrates MRI scanning using the Corsmed MRI simulator. The techniques and protocols shown are for educational demonstration and may vary from clinical practice depending on your institution, scanner manufacturer, and specific patient needs.

This video does not constitute medical advice. Consult with qualified radiologists and follow established clinical guidelines for patient diagnosis and treatment.

11/06/2026

𝗠𝗮𝘀𝘁𝗲𝗿 𝗖𝗮𝗿𝗱𝗶𝗮𝗰 𝗠𝗼𝘁𝗶𝗼𝗻 𝗔𝗿𝘁𝗶𝗳𝗮𝗰𝘁𝘀 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗘𝘅𝗽𝗹𝗮𝗻𝗮𝘁𝗶𝗼𝗻
EASY tutorial for beginners, students, and professional MRI technologists and radiographers.

🔗 𝗚𝗲𝘁 𝘁𝗵𝗲 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗠𝗥𝗜 𝗦𝗶𝗺𝘂𝗹𝗮𝘁𝗼𝗿:
https://www.corsmed.com/mri-simulator/for-individuals

Cardiac motion is one of the biggest challenges in cardiac MRI. Because the heart moves continuously, MRI data can be acquired at different points in the cardiac cycle, which can create severe blur and reduce diagnostic image quality.

In this video, we show exactly how physiological motion affects cardiac MRI images, why ECG-gating is needed, and how cardiac gating helps create a sharp and static image of the heart.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:

1. Identify cardiac motion artifacts in MRI images.
2. Understand why continuous heart motion creates blurred cardiac images.
3. See how ECG-gating synchronizes image acquisition with the heartbeat.
4. Compare cardiac MRI images with and without gating.
5. Understand why cardiac gating is essential for diagnostic-quality cardiac imaging.

DISCLAIMER:

This educational video is intended for training purposes only and demonstrates MRI scanning using the Corsmed MRI simulator. The techniques and protocols shown are for educational demonstration and may vary from clinical practice depending on your institution, scanner manufacturer, and specific patient needs.

This video does not constitute medical advice. Consult with qualified radiologists and follow established clinical guidelines for patient diagnosis and treatment.

Keywords:
magnetic resonance imaging, cardiac MRI, cardiac motion artifact, physiological motion artifact MRI, ECG-gating MRI, cardiac gating MRI, MRI gating, cardiac MRI gating, MRI heart motion, blurred cardiac MRI, cardiac MRI image quality, balanced steady-state free precession, bSSFP cardiac MRI, two-chamber cardiac MRI, left ventricle MRI, left atrium MRI, cardiac cycle MRI, ECG waveform MRI, MRI artifact reduction, MRI simulator practice, Corsmed MRI tutorial

07/06/2026

𝗠𝗮𝘀𝘁𝗲𝗿 𝗧𝗿𝗮𝗻𝘀𝗹𝗮𝘁𝗶𝗼𝗻𝗮𝗹 𝗠𝗼𝘁𝗶𝗼𝗻 𝗔𝗿𝘁𝗶𝗳𝗮𝗰𝘁𝘀 – 𝗦𝘁𝗲𝗽-𝗯𝘆-𝗦𝘁𝗲𝗽 𝗘𝘅𝗽𝗹𝗮𝗻𝗮𝘁𝗶𝗼𝗻
EASY tutorial for beginners, students, and professional MRI technologists and radiographers.

🔗 𝗚𝗲𝘁 𝘁𝗵𝗲 𝗖𝗼𝗿𝘀𝗺𝗲𝗱 𝗠𝗥𝗜 𝗦𝗶𝗺𝘂𝗹𝗮𝘁𝗼𝗿:
https://www.corsmed.com/mri-simulator/for-individuals

Motion blur and ghosting are among the most common MRI artifacts. In this video, we show exactly how translational patient motion appears, why it happens, and how timing parameters like TR and TE affect the final image.

💡 𝗟𝗲𝗮𝗿𝗻 𝗵𝗼𝘄 𝘁𝗼:

1. Identify translational motion artifacts in MRI images.
2. Understand how back-and-forth patient movement creates blur and ghosting.
3. See how TR controls how often the scanner samples motion.
4. Understand how TE determines where in the motion cycle the signal is read.
5. Compare motion artifacts at different TR values, including 333 ms, 650 ms, and 900 ms.

DISCLAIMER:

This educational video is intended for training purposes only and demonstrates MRI scanning using the Corsmed MRI simulator. The techniques and protocols shown are for educational demonstration and may vary from clinical practice depending on your institution, scanner manufacturer, and specific patient needs.

This video does not constitute medical advice. Consult with qualified radiologists and follow established clinical guidelines for patient diagnosis and treatment.

Keywords:
magnetic resonance imaging, MRI artifacts, translational motion artifact, patient motion artifact MRI, MRI motion blur, MRI ghosting artifact, MRI ghosting, linear motion MRI, back and forth motion MRI, MRI TR and motion, MRI TE and motion, repetition time MRI, echo time MRI, MRI timing parameters, MRI motion frequency, MRI image quality, MRI artifact reduction, MRI simulator practice, Corsmed MRI tutorial, MRI training for technologists, MRI student learning, MRI radiographer training, medical imaging education

03/06/2026

🇬🇧 What an incredible three days in London at Dr. Kanal’s MRI Safety Course!

Connecting with so many driven delegates and demonstrating the Corsmed simulator at our booth has been a fantastic experience. It is always inspiring to be surrounded by professionals who are so passionate about advancing our field.

A massive thank you to Barbara Nugent, Emanuel Kanal, and MRI Safety Matters for hosting such a stellar, well-organized event.

Next stop: We can't wait to see you all at the MRI Safety Updates and Innovations Day (MRSUID) on October 31.

Corsmed

24/08/2026

20/08/2026

20/08/2026

27/07/2026

03/07/2026

21/06/2026

16/06/2026

11/06/2026

07/06/2026

03/06/2026

Adress

Webbplats

Aviseringar

Kontakta Affären

Genvägar

Dela

Typ

Begäran om att ta bort annonsen