EdgePal

EdgePal EdgePal sharpening tools from Sweden. We invent, and produce, sharpening tools - and we build them by hand.

Our sharpening tools have built in protractors so that out customers can grind in degrees. We have also a sharpening tools for Ice drills - and it sharpens ice drills perfect, in all three dimensions.

EdgePal Rail are a very nice tool to use when sharpen long blades and when you like to have the same edge angle all alon...
31/07/2016

EdgePal Rail are a very nice tool to use when sharpen long blades and when you like to have the same edge angle all along the edge !

Photo: Gustav Norrhielm

AxePal sharpens axes of cause, both carpenter axes wit flat edge and forest axes with convex edge - but it is a very use...
22/10/2015

AxePal sharpens axes of cause, both carpenter axes wit flat edge and forest axes with convex edge - but it is a very useful tool for sharpening many edged tools. Only your fantasy is the limit :)

if you have a auger (ice drill) you know the problem.IcePal solves that problem.You can sharpen your auger out on the ic...
10/10/2015

if you have a auger (ice drill) you know the problem.
IcePal solves that problem.

You can sharpen your auger out on the ice during fisching - with your gloves on - and get an perfect edge again.

IcePal sharpens all augers, all bit sizes, also the concave "impossible" bits will be perfectly sharp - and IcePal will not change the curvature on the edge.

Forest sharpens both flat and convex edges, has a built in protractor and are adjustble for blade width.
11/11/2013

Forest sharpens both flat and convex edges, has a built in protractor and are adjustble for blade width.

This is an edge on a Mora knife. I grind five facets on the edge. The facets are 1 mm wide, there is 0,75 degrees betwee...
22/09/2013

This is an edge on a Mora knife. I grind five facets on the edge. The facets are 1 mm wide, there is 0,75 degrees between them and the lines between them are straight all the way from the handle, thru the belly, out to the tip.

This is, in my mind, precsion grinding. The complete pic on tis blade can you find on my homepage edgepal.com, Swedish side, slipverktyg/Chef.

This picture shows how 1 hundred part of 1 degree looks -on a knife edge.I first made the edge perfectly flat. then I c...
22/09/2013

This picture shows how 1 hundred part of 1 degree looks -on a knife edge.

I first made the edge perfectly flat. then I change the sharpening angle with 1 hunderd part of 1 degree and made a new angle on the edge.

I made the scratches diagonal in different directions so that it is possible to se it what I did.

If the scratches is in the same directions this small differance of the angle will be invisble.

12/04/2012

Adress

Häggenås
83693

Telefon

+46702604474

Webbplats

Aviseringar

Var den första att veta och låt oss skicka ett mail när EdgePal postar nyheter och kampanjer. Din e-postadress kommer inte att användas för något annat ändamål, och du kan när som helst avbryta prenumerationen.

Genvägar

Dela