Heritage Fab Engineering

Heritage Fab Engineering Custom 3-piece conversions of classic Saab wheels. est. 2025

The 17” Aero demo set is as good as finished. Based on part no. 9103219 (15” Aero 4x108).Spec:- 17x7.5” with 24mm offset...
15/05/2026

The 17” Aero demo set is as good as finished. Based on part no. 9103219 (15” Aero 4x108).

Spec:
- 17x7.5” with 24mm offset
- 2.5” Radinox outers, 5” Alu inners, stainless bolts
- Faces painted VW LD7W

Could have been part of the accessories catalogue back then👌🏻

Two sets of coilover-spring conversion kits ready for dispatch. These are available for both 99 (left) and C900 (right)....
09/05/2026

Two sets of coilover-spring conversion kits ready for dispatch. These are available for both 99 (left) and C900 (right).

Built to order, current estimated lead time is around two weeks.

Introducing the C900 front drop stop kit. Direct fit by using existing holes and enables adjustable drop stop height. Co...
24/04/2026

Introducing the C900 front drop stop kit. Direct fit by using existing holes and enables adjustable drop stop height. Compatible with ABS-cars. A great solution for those with shortened lowering springs or coilover-spring coversion kits.

Available for pre-order now.

The development set of the C900 coilover-spring conversion kit is live! 🔥 Planning to start offering these kits within t...
14/02/2026

The development set of the C900 coilover-spring conversion kit is live! 🔥 Planning to start offering these kits within the upcoming months. This is a bolt-on solution that enables custom spring rates with plenty of ride-height adjustment both front and rear.

Development completed of the Aero92, part no. 4004750/4004743. Originally 15x5.5” ET40, pictured as 17x8” ET28 with a 3”...
11/02/2026

Development completed of the Aero92, part no. 4004750/4004743. Originally 15x5.5” ET40, pictured as 17x8” ET28 with a 3” lip🔥

First set of customer faces is ready for dispatch👌🏻

First customer set of ALU86 faces ready for shipping. It’s possible to build either 18” (single step) or 19” (double ste...
06/01/2026

First customer set of ALU86 faces ready for shipping. It’s possible to build either 18” (single step) or 19” (double step) wheels with these👌🏻

✉️ [email protected]

Lips and barrels for the ALU86 demo set have arrived🔥9-5 spec @ 18x8.5” ET40 front (2.25” lip) / 18x9” ET33 rear (2.75” ...
07/12/2025

Lips and barrels for the ALU86 demo set have arrived🔥

9-5 spec @ 18x8.5” ET40 front (2.25” lip) / 18x9” ET33 rear (2.75” lip).

✉️ [email protected]

Classic Compomotive TS701 with flat back redrilled to 5x112👌🏻✉️ sales@heritagefabswe.com or DM for more info about bolt ...
18/11/2025

Classic Compomotive TS701 with flat back redrilled to 5x112👌🏻

✉️ [email protected] or DM for more info about bolt pattern change.

Two more sets available!- 15” Aero 4x108 part no. 9103219 (donor set required)- 15” Directionals 4x108 part no. 4004735 ...
17/11/2025

Two more sets available!

- 15” Aero 4x108 part no. 9103219 (donor set required)
- 15” Directionals 4x108 part no. 4004735 / 4004727

✉️ [email protected] or DM for more info

Development completed of the 4x114.3 Aero, part no. 8985970. The design of this early version is deeper than the later 4...
16/11/2025

Development completed of the 4x114.3 Aero, part no. 8985970. The design of this early version is deeper than the later 4x108 one. Pictured as 17x8” ET23 with a 3” lip.

Perfect for 99/900 with the old brake system up until MY87.

One set available for immediate dispatch (donor set required). We can also machine your set (estimated delivery time 4-6 weeks).

✉️ [email protected]

Adress

Älvängen

Webbplats

Aviseringar

Var den första att veta och låt oss skicka ett mail när Heritage Fab Engineering postar nyheter och kampanjer. Din e-postadress kommer inte att användas för något annat ändamål, och du kan när som helst avbryta prenumerationen.

Kontakta Affären

Skicka ett meddelande till Heritage Fab Engineering:

Genvägar

Dela

Typ