KEA Engineers and Surveyors Academy

18/10/2019

01/10/2019

REVIT ARCHITECTURE ESSENTIALS

Date :OCTOBER 18, 25, NOV 1, 15 & 22, 2019
Timing : 1:00PM - 5:00PM

Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

REVIT ARCHITECTURE ESSENTIAL COURSE OUTLINE

Day 1 - Getting Stated

• Introduction to Building Information Modeling (BIM).
• About Revit.
• About Parametric Modeling Relationships.
• About element behavior in Revit.
• Element for Revit.
• About Element Properties.
• User Interface.
• Start a new project.
• Save a project.
• View Navigation
• Model Lay-out (Grids & Levels) And Linking CAD file for Reference.
• Model a sample Walls

Day 2 – Model the Design (Proposed Two Storey

Residential)
• Sketch Wall & Edit wall system Family setting.
• Sketch floor & Edit floor system Family setting.
• Inserting & edit loadable family (Column)
• Inserting & edit loadable family (Door)
• Inserting & edit loadable family (Window)

Day 3 – Model the Design (Proposed Two Storey Residential)

• Create Staircase
• Create shaft opening
• Creating & edit Roof System Family setting.
• Applying Materials

Day 4 – Model In-Place & Mass In-Place

• Extrusion
• Blend
• Revolve
• Sweep
• Swept Blend
• Void
• Mass
Day 5 – Documentation
• Creating Sheet
• View Templates
• Dimension and Annotation
• Print your work

01/10/2019

REVIT MEP ESSENTIALS 2019

Date : OCTOBER 18, 25, NOV 1, 15 & 22, 2019
Timing :8:00 Am to 12:00 Am
Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

COURSE OUTLINE:

STARTING A REVIT PROJECT
• Introduction of Autodesk Native Revit File Format(.rte, .rvt, .rft , .rfa)
• Revit settings (Eg. Graphics, File Locations, User Interface etc.)
• User Interface (Hide/Unhide Project Browser, Properties palette, Navigation Bar, Status Bar, etc.)
Drag and relocate Panels, Ribbon Tabs,
• Modify Tools (Move, Copy, Paste, Create Similar, Rotate, Mirror, Scale, Array, Split Element, Trim, Align, Offset, Pin, Unpin, Delete) And Dimensions
• Linking Architectural Projects
• Copy and Monitoring Elements(Copy Levels, Grids…etc.)
• Creating Floor Plans, Reflecting Ceiling Plan view from Linked Model
• Managing Link (Reload From, Reload, Unload, Add, Remove)
• Coordination Review
• Creating Views (Section and Elevation, Duplicating Views, Adding Callout views, Overriding Graphics in view, view Range )
Revit Electrical
• Electrical Setting
• Adding Receptacles (Electrical Fixtures)
• Adding Panels (Electrical Equipments) (Eg. M_Lighting & Appliance Panelboard-208vMLO-Surface, etc)
• Creating Power Circuits
• Placing Lighting Fixtures
• Adding Switches
• Create Switch System
• Creating Panel Schedule
• Tagging and Edit Labeling
• Conduits and Fittings
• Cable Trays and Fittings
• Schedules/Quantities (Material Takeoff)
Revit Mechanical
• Mechanical Setting
• Creating Spaces , Zones, Color Schemes, Creating Legend For Color Fill
• Analyzing the Heating and Cooling Loads
• Adding Air Terminal and Mechanical Equipment
• Adding Ducts and Fittings , Duct Placeholder , Convert Duct Placeholder, Adding Insulation , Sizing Ducts
• Placing Duct Accessories (Eg. Fire Damper….etc )
• Shared Parameter - (Can be Used in multiple families or projects, Can appear in schedule and tag)
• Project Parameter – ( Used For Scheduling, Sorting & Filtering in a project, Can appear in schedule, not in tag )
• Creating HVAC Systems (Supply, Return….etc)
• Duct/Pipe Sizing , Duct Legend, Tagging Duct
• Interference Check & Clash Management
• Schedules/Quantities (Material Takeoff)
Revit Plumbing
• Pipe Settings
• Adding Sanitary Components or Plumbing Fixtures (Eg. Water Closet, Sinks , Drain , Lavatories, Urinal….etc )
• Adding Plumbing Equipment (Eg. Water Heater….. etc)
• Adding Piping Equipments (Eg. Pumps….etc)
• Creating Piping System (Domestic Cold Water, Domestic Hot Water)
• Adding Pipe Accessories (Eg. Valves, )
• Adding Sanitary Sloped Piping
• Creating Sanitary System
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Revit Fire Protection
• Adding Sprinklers (wet & Dry type)
• Creating Fire Protection System (Fire Protection Dry & Fire Protection Wet)
• Modeling Main and Branch Pipes
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Construction Documents
• Setting up Sheets
• Sheet (Title Block) Properties
• Placing Views on Sheets
• Modifying Views on Sheets
• Adding Revisions
• Printing Sheets
• Exporting Revit to (CAD, NWC,….etc)

01/10/2019

REVIT MEP ESSENTIALS 2019

Date : OCTOBER 18, 25, NOV 1, 15 & 22, 2019
Timing :8:00 Am to 12:00 Am
Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

COURSE OUTLINE:

STARTING A REVIT PROJECT
• Introduction of Autodesk Native Revit File Format(.rte, .rvt, .rft , .rfa)
• Revit settings (Eg. Graphics, File Locations, User Interface etc.)
• User Interface (Hide/Unhide Project Browser, Properties palette, Navigation Bar, Status Bar, etc.)
Drag and relocate Panels, Ribbon Tabs,
• Modify Tools (Move, Copy, Paste, Create Similar, Rotate, Mirror, Scale, Array, Split Element, Trim, Align, Offset, Pin, Unpin, Delete) And Dimensions
• Linking Architectural Projects
• Copy and Monitoring Elements(Copy Levels, Grids…etc.)
• Creating Floor Plans, Reflecting Ceiling Plan view from Linked Model
• Managing Link (Reload From, Reload, Unload, Add, Remove)
• Coordination Review
• Creating Views (Section and Elevation, Duplicating Views, Adding Callout views, Overriding Graphics in view, view Range )
Revit Electrical
• Electrical Setting
• Adding Receptacles (Electrical Fixtures)
• Adding Panels (Electrical Equipments) (Eg. M_Lighting & Appliance Panelboard-208vMLO-Surface, etc)
• Creating Power Circuits
• Placing Lighting Fixtures
• Adding Switches
• Create Switch System
• Creating Panel Schedule
• Tagging and Edit Labeling
• Conduits and Fittings
• Cable Trays and Fittings
• Schedules/Quantities (Material Takeoff)
Revit Mechanical
• Mechanical Setting
• Creating Spaces , Zones, Color Schemes, Creating Legend For Color Fill
• Analyzing the Heating and Cooling Loads
• Adding Air Terminal and Mechanical Equipment
• Adding Ducts and Fittings , Duct Placeholder , Convert Duct Placeholder, Adding Insulation , Sizing Ducts
• Placing Duct Accessories (Eg. Fire Damper….etc )
• Shared Parameter - (Can be Used in multiple families or projects, Can appear in schedule and tag)
• Project Parameter – ( Used For Scheduling, Sorting & Filtering in a project, Can appear in schedule, not in tag )
• Creating HVAC Systems (Supply, Return….etc)
• Duct/Pipe Sizing , Duct Legend, Tagging Duct
• Interference Check & Clash Management
• Schedules/Quantities (Material Takeoff)
Revit Plumbing
• Pipe Settings
• Adding Sanitary Components or Plumbing Fixtures (Eg. Water Closet, Sinks , Drain , Lavatories, Urinal….etc )
• Adding Plumbing Equipment (Eg. Water Heater….. etc)
• Adding Piping Equipments (Eg. Pumps….etc)
• Creating Piping System (Domestic Cold Water, Domestic Hot Water)
• Adding Pipe Accessories (Eg. Valves, )
• Adding Sanitary Sloped Piping
• Creating Sanitary System
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Revit Fire Protection
• Adding Sprinklers (wet & Dry type)
• Creating Fire Protection System (Fire Protection Dry & Fire Protection Wet)
• Modeling Main and Branch Pipes
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Construction Documents
• Setting up Sheets
• Sheet (Title Block) Properties
• Placing Views on Sheets
• Modifying Views on Sheets
• Adding Revisions
• Printing Sheets
• Exporting Revit to (CAD, NWC,….etc)

19/07/2019

14/06/2019

REVIT MEP ESSENTIALS 2019

Date : JUNE 21, 28, JULY 5, 12, 19, 2019
Timing :1:00 pm to 5:00 pm
Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

COURSE OUTLINE:

STARTING A REVIT PROJECT
• Introduction of Autodesk Native Revit File Format(.rte, .rvt, .rft , .rfa)
• Revit settings (Eg. Graphics, File Locations, User Interface etc.)
• User Interface (Hide/Unhide Project Browser, Properties palette, Navigation Bar, Status Bar, etc.)
Drag and relocate Panels, Ribbon Tabs,
• Modify Tools (Move, Copy, Paste, Create Similar, Rotate, Mirror, Scale, Array, Split Element, Trim, Align, Offset, Pin, Unpin, Delete) And Dimensions
• Linking Architectural Projects
• Copy and Monitoring Elements(Copy Levels, Grids…etc.)
• Creating Floor Plans, Reflecting Ceiling Plan view from Linked Model
• Managing Link (Reload From, Reload, Unload, Add, Remove)
• Coordination Review
• Creating Views (Section and Elevation, Duplicating Views, Adding Callout views, Overriding Graphics in view, view Range )
Revit Electrical
• Electrical Setting
• Adding Receptacles (Electrical Fixtures)
• Adding Panels (Electrical Equipments) (Eg. M_Lighting & Appliance Panelboard-208vMLO-Surface, etc)
• Creating Power Circuits
• Placing Lighting Fixtures
• Adding Switches
• Create Switch System
• Creating Panel Schedule
• Tagging and Edit Labeling
• Conduits and Fittings
• Cable Trays and Fittings
• Schedules/Quantities (Material Takeoff)
Revit Mechanical
• Mechanical Setting
• Creating Spaces , Zones, Color Schemes, Creating Legend For Color Fill
• Analyzing the Heating and Cooling Loads
• Adding Air Terminal and Mechanical Equipment
• Adding Ducts and Fittings , Duct Placeholder , Convert Duct Placeholder, Adding Insulation , Sizing Ducts
• Placing Duct Accessories (Eg. Fire Damper….etc )
• Shared Parameter - (Can be Used in multiple families or projects, Can appear in schedule and tag)
• Project Parameter – ( Used For Scheduling, Sorting & Filtering in a project, Can appear in schedule, not in tag )
• Creating HVAC Systems (Supply, Return….etc)
• Duct/Pipe Sizing , Duct Legend, Tagging Duct
• Interference Check & Clash Management
• Schedules/Quantities (Material Takeoff)
Revit Plumbing
• Pipe Settings
• Adding Sanitary Components or Plumbing Fixtures (Eg. Water Closet, Sinks , Drain , Lavatories, Urinal….etc )
• Adding Plumbing Equipment (Eg. Water Heater….. etc)
• Adding Piping Equipments (Eg. Pumps….etc)
• Creating Piping System (Domestic Cold Water, Domestic Hot Water)
• Adding Pipe Accessories (Eg. Valves, )
• Adding Sanitary Sloped Piping
• Creating Sanitary System
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Revit Fire Protection
• Adding Sprinklers (wet & Dry type)
• Creating Fire Protection System (Fire Protection Dry & Fire Protection Wet)
• Modeling Main and Branch Pipes
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Construction Documents
• Setting up Sheets
• Sheet (Title Block) Properties
• Placing Views on Sheets
• Modifying Views on Sheets
• Adding Revisions
• Printing Sheets
• Exporting Revit to (CAD, NWC,….etc)

14/06/2019

REVIT ARCHITECTURE ESSENTIALS

Date :JUNE 21, 28, JULY 5, 12, 19, 2019
Timing : 8:00AM - 12:00PM

Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

REVIT ARCHITECTURE ESSENTIAL COURSE OUTLINE

Day 1 - Getting Stated

• Introduction to Building Information Modeling (BIM).
• About Revit.
• About Parametric Modeling Relationships.
• About element behavior in Revit.
• Element for Revit.
• About Element Properties.
• User Interface.
• Start a new project.
• Save a project.
• View Navigation
• Model Lay-out (Grids & Levels) And Linking CAD file for Reference.
• Model a sample Walls

Day 2 – Model the Design (Proposed Two Storey

Residential)
• Sketch Wall & Edit wall system Family setting.
• Sketch floor & Edit floor system Family setting.
• Inserting & edit loadable family (Column)
• Inserting & edit loadable family (Door)
• Inserting & edit loadable family (Window)

Day 3 – Model the Design (Proposed Two Storey Residential)

• Create Staircase
• Create shaft opening
• Creating & edit Roof System Family setting.
• Applying Materials

Day 4 – Model In-Place & Mass In-Place

• Extrusion
• Blend
• Revolve
• Sweep
• Swept Blend
• Void
• Mass
Day 5 – Documentation
• Creating Sheet
• View Templates
• Dimension and Annotation
• Print your work

18/05/2019

KEA SURVEYING TECHNOLOGY SERVICES AND KEACADD BIM & CAD CONSULTANCY is
inviting you for a 20.0 Hours Comprehensive Hands-on training in Autodesk® Revit® MEP

Date : JUNE 21, 28, JULY 5, 12, 19, 2019
Timing :1:00 pm to 5:00 pm
Location : Riyadh, Saudi Arabia

FOR INQUIRIES PLS. CONTACT

WHATSAPP/VIBER: 0502304815

COURSE OUTLINE:

STARTING A REVIT PROJECT
• Introduction of Autodesk Native Revit File Format(.rte, .rvt, .rft , .rfa)
• Revit settings (Eg. Graphics, File Locations, User Interface etc.)
• User Interface (Hide/Unhide Project Browser, Properties palette, Navigation Bar, Status Bar, etc.)
Drag and relocate Panels, Ribbon Tabs,
• Modify Tools (Move, Copy, Paste, Create Similar, Rotate, Mirror, Scale, Array, Split Element, Trim, Align, Offset, Pin, Unpin, Delete) And Dimensions
• Linking Architectural Projects
• Copy and Monitoring Elements(Copy Levels, Grids…etc.)
• Creating Floor Plans, Reflecting Ceiling Plan view from Linked Model
• Managing Link (Reload From, Reload, Unload, Add, Remove)
• Coordination Review
• Creating Views (Section and Elevation, Duplicating Views, Adding Callout views, Overriding Graphics in view, view Range )
Revit Electrical
• Electrical Setting
• Adding Receptacles (Electrical Fixtures)
• Adding Panels (Electrical Equipments) (Eg. M_Lighting & Appliance Panelboard-208vMLO-Surface, etc)
• Creating Power Circuits
• Placing Lighting Fixtures
• Adding Switches
• Create Switch System
• Creating Panel Schedule
• Tagging and Edit Labeling
• Conduits and Fittings
• Cable Trays and Fittings
• Schedules/Quantities (Material Takeoff)
Revit Mechanical
• Mechanical Setting
• Creating Spaces , Zones, Color Schemes, Creating Legend For Color Fill
• Analyzing the Heating and Cooling Loads
• Adding Air Terminal and Mechanical Equipment
• Adding Ducts and Fittings , Duct Placeholder , Convert Duct Placeholder, Adding Insulation , Sizing Ducts
• Placing Duct Accessories (Eg. Fire Damper….etc )
• Shared Parameter - (Can be Used in multiple families or projects, Can appear in schedule and tag)
• Project Parameter – ( Used For Scheduling, Sorting & Filtering in a project, Can appear in schedule, not in tag )
• Creating HVAC Systems (Supply, Return….etc)
• Duct/Pipe Sizing , Duct Legend, Tagging Duct
• Interference Check & Clash Management
• Schedules/Quantities (Material Takeoff)
Revit Plumbing
• Pipe Settings
• Adding Sanitary Components or Plumbing Fixtures (Eg. Water Closet, Sinks , Drain , Lavatories, Urinal….etc )
• Adding Plumbing Equipment (Eg. Water Heater….. etc)
• Adding Piping Equipments (Eg. Pumps….etc)
• Creating Piping System (Domestic Cold Water, Domestic Hot Water)
• Adding Pipe Accessories (Eg. Valves, )
• Adding Sanitary Sloped Piping
• Creating Sanitary System
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Revit Fire Protection
• Adding Sprinklers (wet & Dry type)
• Creating Fire Protection System (Fire Protection Dry & Fire Protection Wet)
• Modeling Main and Branch Pipes
• Pipe Tagging
• Schedules/Quantities (Material Takeoff)
Construction Documents
• Setting up Sheets
• Sheet (Title Block) Properties
• Placing Views on Sheets
• Modifying Views on Sheets
• Adding Revisions
• Printing Sheets
• Exporting Revit to (CAD, NWC,….etc)