Euromáquinas Máquinas e Ferramentas

14/02/2026

11/11/2023

Over time, the reciprocating movement of the pistons replaces the crosshatch pattern on cylinder walls with a glaze that limits lubrication. The Flex-Hone tool breaks this glaze and imparts a fresh crosshatch. https://hubs.li/Q027nLxN0

03/11/2023

Yes, you can use the Flex-Hone with ported cylinders like this. The tool breaks the glaze, improves the finish, and safely chamfers the ports. It's a surface finishing tool and not a heavy-duty material removal tool. https://hubs.li/Q027nrKz0

09/09/2023

The ceramic abrasive filaments in these NamPower end brushes have lasted 3-5 times longer than the competition during testing. They're available down to 1/2” (12.7mm). https://hubs.li/Q021fWg60

18/08/2023

Millers Oils’ Vintage and Classic monograde engine oils… part two.

Following on from our focus last month about our Vintage Millerol engine oils, this month we are looking at our Classic Pistoneeze engine oils, also available in SAE 30, 40, and 50 viscosities.

Unlike the Vintage Millerol oils, the Classic Pistoneeze oils are moderate detergent engine oils and are suitable for post-war cars.

The Pistoneeze monograde engine oils are mineral-based and provide the level of wear and anti-oxidant protection required in Classic cars, but can be suitable for Vintage cars that have been upgraded to a modern filtration system i.e. replaceable oil filter. The level of protection provided is exceptional and equivalent to API SG performance.

They are formulated with full ZDDP, which we recently did a blog about: https://www.millersoils.co.uk/zddp-in-classic-car-engine-oil/

Find out more about these product here: https://www.millersoils.co.uk/product-category/vintage-and-classic-vehicle/?text_search=pistoneeze

Monograde engine oils not right for you? Find our multigrade oils here: https://www.millersoils.co.uk/product-category/vintage-and-classic-vehicle/?text_search=pistoneeze

20/07/2023

NamPower disc brushes can be used wet or dry, but brushes that are used with a coolant can spin faster and without overheating. Have you tried these surface finishing and deburring tools yet? https://hubs.li/Q01XcXXR0

17/07/2023

Millers Oils’ Vintage and Classic monograde engine oils... part one.

Today we are focusing on our Vintage Millerol engine oils, which are available in SAE 30, 40, and 50 viscosities.

Millerol monograde engine oils are mineral-based products engineered for pre-war vintage cars with a strainer or basic filtration system.

These non-detergent grades provide anti-scuff capability and resistance to oil oxidation and bearing corrosion. The level of protection provided is exceptional and equivalent to API SB performance.

These oils are specifically formulated with ZDDP, which we recently did a blog about: https://www.millersoils.co.uk/zddp-in-classic-car-engine-oil/

Find out more about this product here: https://www.millersoils.co.uk/product-category/vintage-and-classic-vehicle/?text_search=millerol

Keep an eye out next month when we talk about our Classic Pistoneeze monograde engine oils!

14/06/2023

These heavy-duty Flex-Hone tools are designed for bores between 8" and 18". They're built with an aluminum sleeve over a lightweight wooden core. https://hubs.li/Q01Sjkvq0

30/05/2023

When cylinder walls have a 45° crosshatch, the upward motion of the piston spreads the oil sideways in both directions and covers the entire wall. Use the Flex-Hone tool to get this crosshatch angle. https://hubs.li/Q01Ng1-M0

19/05/2023

Want to cut labor costs and speed cycle times? Use a NamPower disc brush with your CNC machining center. BRM's brushing tools also integrate with robotic cells. https://hubs.li/Q01NdL120

04/05/2023

Computer numerical control lathes are modern metal cutting machines, full of technological opportunities. They are suitable for processing parts with highly complex surfaces where the requirements for dimensional accuracy do not tolerate any deviation. These lathes are used in a variety of serial pr...