Advanced Geotechnical Engineering Services - Pile Testing

03/10/2026

Let’s break down the different types of Static Load Testing (SLT), starting with Compressive SLT. 🏗️

A Compressive Static Load Test applies a controlled downward load to the pile to evaluate its load-carrying capacity and load–settlement behavior. This helps assess how the pile performs when subjected to compressive loads from the structure.

Stay tuned as we explore the next type of SLT!

Engineering

29/09/2026

Want to know how much load a pile can really carry? 🏗️

PDA isn’t the only way to test pile capacity. A Static Load Test directly applies load to a pile under controlled conditions, while measuring the pile’s settlement at each load level.

This direct load-and-settlement measurement provides reliable field data for evaluating the pile’s bearing capacity and performance.

Stay tuned this week as we explore the different types of Static Load Tests and how each one helps evaluate pile capacity.

26/09/2026

Dynamic pile testing or Pile Dynamic Analysis (PDA) has become one of the most widely used methods for evaluating foundation performance. By using advanced instrumentation and wave analysis techniques, engineers can quickly assess pile behavior and verify design assumptions.

Here are the Top 5 benefits of Pile Dynamic Analysis: https://ages.ph/top-5-benefits-of-pile-dynamic-analysis-ages-philippines/

Discover the top Benefits of dynamic pile testing or PDA, including faster results, cost savings, and improved foundation quality assurance

23/09/2026

What does a typical PDA test setup look like? 🏗️

From the hammer and pile to the sensors and PDA equipment, every component plays a role in capturing the pile’s response during dynamic loading. ⚙️📊

19/09/2026

Soft ground in Flood-prone site. Heavy and high structure. No room for guesswork. 🌊🏗️

PDA testing helps confirm the pile capacity present to safely support the building.

Building one for the ages.

15/09/2026

How do we know a pile can safely support the loads required by a structure?

Dynamic Pile Testing, also known as Pile Dynamic Analysis (PDA), evaluates the load-bearing capacity and structural integrity of foundation piles using controlled impact forces and sensors.

Fast, efficient, and widely used to assess foundation performance. 🏗️

Read more here: https://ages.ph/what-is-dynamic-pile-testing-ages-astm-d4945/

Learn about Pile Dynamic Analysis at AGES and its uses in the Philippine context of geotechnical engineering.

12/09/2026

Connecting Luzon and Visayas across the San Bernardino Strait. 🌉

The proposed Sorsogon–Northern Samar Link Bridge is envisioned as a 20–28-kilometer bridge system composed of three long-span cable-stayed bridges, connecting Sorsogon and Northern Samar through the islands of Capul and San Antonio.

Beneath these massive structures, deep foundation piles will play a critical role in transferring structural loads through the seabed and into the ground below. Their integrity and capacity will be essential in supporting a bridge system designed to withstand the demanding conditions of an inter-island crossing.

The project is being developed with the Department of Public Works and Highways (DPWH), with TYLin involved in the engineering and feasibility assessment, and Asian Development Bank (ADB) among the institutions supporting the project's development.

The comprehensive feasibility assessment is targeted for completion in 2027.

08/09/2026

Connecting Bataan and Cavite like never before. 🌉

The Bataan-Cavite Interlink Bridge is a proposed 32.15-kilometer, four-lane bridge that will connect Mariveles, Bataan, and Naic, Cavite.

To support a structure of this scale, its massive piers will rely on deep foundation piles to transfer structural loads deep into the ground beneath the seabed.

Once completed, it is expected to cut travel time between the two provinces from around five hours to just 45 minutes, while improving connectivity between Central Luzon and CALABARZON.

05/09/2026

What’s beneath the surface matters. 👀🏗️

PDA testing helps evaluate a pile’s integrity (quality) and capacity (ability to carry load)—because a strong structure starts with a strong foundation.

01/09/2026

What’s happening beneath the pile? 👀

With the Pile Driving Analysis (PDA) Test, engineers can evaluate a pile’s capacity and integrity—helping ensure that every pile is ready to carry the load above. 🏗️💪