Pert Equipment & Industrial Supply

28/09/2024

25/03/2024

FOR INQUIRIES PLEASE CAL 85327240 / 85320741 / 84412881

22/03/2024

Mary The Queen Parish Columbary
Belfast Ave. Fairview QC

Columbarium Niche

4 Urns
3 names - nameplate

measurement - 48 x 42

Php 52,000.00

17/03/2024

“PERT” brand CONCRETE PIPE MOLD, consisting of Inner Circular
Steel Form and Outer Steel Form with guides, hinges, lock and
handles, complete with a set of Lower and Upper Steel Rings, Steel
Mold is made of Gauge 12 (2.5mm)MS plate and each model is
designed to produce concrete pipe of one (1) meter long:

4" - P 10,000
6" - P 11,200
8" - P 12,600
10" - P 14,200
12" - P 17,400
15" - P 23,000
18" - P 25,200
21" - P 28,800
24" - P 32,000
30" - P 49,500
36" - P 59,200
42" - P 72,000
48" - P 84,000
54" - P 126,800
60" - P 132,000
72" - P 170,000

all items are for fabrication upon order

for further inquiries please call
8-5320741 / 5327240 / 5352376 / 4412880 to 82
look for Mark or Rey

15/03/2024

“PERT” MANUAL BAR CUTTER HEAVY DUTY 25mm maximum cutting capacity local made, with tool steel body, complete with blade made in Sweden,
- if 25mm can cut up to grade 33 & grade 40
- if 22mm can cut up to grade 60
--> Php 25,000.00

“PERT” MANUAL BAR CUTTER HEAVY DUTY 32mm maximum cutting capacity local made, with tool steel body, complete with blade made in Sweden
- if 32mm can cut up to grade 33
- if 28mm can cut up to grade 40
- if 25mm can cut up to grade 60
--> Php 27,000.00

Bar Cutter Blade: 25mm – P 5,000
32mm – P 5,700

12/03/2024

“PERT” brand VIBRATORY SAND SCREENER 2 feet width x 4 feet
length x 38” height, stainless steel screen, frame made of B.I. Pipe
1”Ø x gauge #18 thick siding with angle bar base and stand 1/4” X
2” X 2” complete with support, with 2-pcs. caster wheel

a. If driven by 1Hp MINDONG electric motor 1-phase 220V China
- Php 38,500.00

b. If driven by 1Hp MARATHON Electric Motor 1-ph. 220v (USA)
- Php 48,000.00

FOR FURTHER INQUIRIES PLEASE CALL:
MARK GEPTY
8532-7240 / 532-0741 / 535-2376
[email protected]

11/03/2024

“PERT” brand VIBRATORY FINISHING SCREED unbalanced weight
in dust-proof casing and heavy duty sealed bearings, from 4K to 5K
vibration per minute, Screed reinforced with heavy-duty and long
lasting B.I. Tubing 3mm thick 2” x 4”

IF 13 FEET LONG:
a. driven by 5Hp ROBIN Gas Engine - Php 41,000.00
b. driven by 6.5Hp MARINE Gas Engine - Php 32,500.00

IF 16 FEET LONG:
a. driven by 5Hp ROBIN Gas Engine - Php 46,000.00
b. driven by 6.5Hp MARINE Gas Engine - Php 37,500.00

For further inquiries please call
8532-0741 / 8532-7240 / 8535-2376 / 8441-2880 to 82
Look for: Rey / Mark

11/03/2024

“PERT” brand TERRAZO GRINDER single disk w/ 3-pcs. grinding stone 2” x 2” x 4”, with holder 1/2” thick x 14”Ø M.S. Plate, with 2-pcs. solid rubber wheel 8”Ø, with 10-meters royal cord and 60 amperes safety switch

If driven by 3Hp MEIJI / MINDONG electric motor, 1-phase, 220V (China)
- Php 39,000.00

If driven by 3Hp MARATHON electric motor, 1-phase 220V (USA)
- Php 66,000.00

for inquiries & quotations please call
8532-7240 / 0741 / 8535-2376 / 8441-2880 to 82
Look for Mark / Sir Rey

11/03/2024

"PERT” brand VIBRATORY PLATE COMPACTOR ½” X 18” X 20”
vibrating plate, ¾” x 18” X 15” engine base, 3 to 5 tons compacting
capacity, 3.5K to 5K vibration per minute (VPM), with four (4)
compression spring and eight (8) pieces rubber bushing as
vibration damper, unbalanced weight, including bearing immersed
in oil, heavy duty cylinder with two (2) wheels 8ӯ, of solid tires for
convenient handling & transport:

a. If driven by 7.5Hp ROBIN gas engine (Japan) - Php 49,000.00
b. If driven by 5Hp ROBIN gas engine (Japan) - Php 40,000.00
c. If driven by 6.5Hp MARINE gas engine (China) - Php 31,000.00
d. If driven by 6.5Hp BRIGGS gas engine (USA) - Php 36,00.00
e. If driven by 6.5Hp HONDA gas engine (Japan) - Php 36,500.00
f. If driven by 6.5Hp KOHLER gas engine (USA) - Php 38,000.00
g. If driven by 7Hp LAUNTOP diesel engine (China) - Php 39,000.00

FOR FURTHER INQUIRIES PLEASE CALL:
MARK GEPTY
8532-7240 / 532-0741 / 535-2376
[email protected]

06/03/2024

PERT” brand MANUAL BAR BENDER 42mm maximum bending
capacity, made of Tool Steel 4140 (36”L x 24”W x 8”H x 80-
100klsWT. / Handle: 7ft.)

- Php 56,000.00

for inquiries please call:
Mark Gepty
8-532-0741 / 532-7240 / 535-2376 / 542-2866