What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm Saturday 9am - 5pm

https://www.facebook.com/159982890756882/

Alfra Steel Ind. Inc.

Name: Alfra Steel Ind. Inc.
Address: Gov. Pascual Avenue, Malabon, 1470, PH
Telephone: +63282888652

Home
Philippines
Malabon
Alfra Steel Ind. Inc.

Welcome to Alfra Steel Industrial Incorporated Official page, your one-stop-shop for your electrical conduit needs.

We are the exclusive manufacturer of Nichi IMC/EMT and Magnus Brand Conduit Pipes. Philippine's #1 manufacturer of steel conduit pipes.

15/04/2026

SERVICE ENTRANCE CAP (THREADED TYPE)
A service entrance cap (threaded type) is a metal fitting that screws onto the threaded end of a service entrance conduit where electrical service wires enter a building. It protects the wires from damage caused by sharp conduit edges and helps shield the entry point from weather. This type of service entrance cap is commonly used in overhead electrical service installations to provide a secure, durable, and weather-resistant connection for incoming power lines.

📌How to Use a Threaded Service Entrance Cap:
1. Ensure the threaded conduit is properly installed and securely mounted.
2. Pull the service entrance conductors through the conduit.
3. Thread the service entrance cap tightly onto the conduit end.
4. Feed the conductors through the cap openings or rubber grommet.
5. Make sure the cap is positioned correctly to shed water away from the conduit.

Using a threaded service entrance cap helps extend the life of electrical systems by preventing moisture entry, reducing corrosion, and maintaining code-compliant installations. Built from durable materials and designed for dependable performance, it’s a trusted choice for electricians and contractors who need safe, weather-resistant, and professional service entrance solutions.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

13/04/2026

ANGLE CONNECTOR
An angle connector is a metal fitting used to join two structural components at a right angle, usually 90 degrees. It is commonly used with framing systems like Unistrut to create corners, braces, or supports. Angle connectors help provide strength and stability to frames and structures and are widely used in electrical, mechanical, HVAC, and construction applications to support equipment, piping, and conduit.

📌How It’s Used:
1. Insert the conduit into the connector
2. Tighten the clamp or screws to secure the conduit
3. Thread the connector into the electrical box or enclosure
4. Ensure all fittings are tightened for a stable, safe setup

When space is limited but performance matters, the Angle Connector delivers a clean, professional finish you can trust. A reliable choice for electricians and installers who value strength, safety, and precision in every connection.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

11/04/2026

LIQUID TIGHT ANGLE CONNECTOR
A liquid-tight angle connector is a fitting used to connect liquid-tight flexible conduit to an electrical box, panel, or enclosure at a 90-degree angle. It creates a secure, watertight seal that protects wiring from moisture, dust, oil, and other contaminants. Liquid-tight angle connectors are commonly used in outdoor, wet, or industrial environments where space is limited and conduit needs to turn while maintaining strong environmental protection.

📌How It’s Used:
1. Insert the liquid-tight flexible conduit into the connector
2. Tighten the compression nut to create a watertight seal
3. Thread the connector into a box or enclosure opening
4. Secure firmly for vibration-resistant performance
5. Route conduit neatly around corners or confined areas

When reliability and protection matter most, the Liquid-Tight Angle Connector delivers dependable performance and a clean installation even in the toughest conditions. A smart solution for safer, more efficient electrical systems.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

10/04/2026

GROUND ROD (GALVANIZED)
A galvanized ground rod is a metal rod made of steel coated with zinc and driven into the ground to provide a safe path for electrical current to flow into the earth. The galvanized coating helps protect the rod from corrosion and rust. Galvanized ground rods are commonly used in electrical grounding systems for buildings and equipment to improve safety, reduce the risk of electrical shock, and protect systems from lightning and power surges.

📌How It’s Used:
1. Drive the galvanized ground rod vertically into the ground
2. Ensure firm contact with soil for effective grounding
3. Attach a grounding conductor using an approved ground clamp
4. Connect the conductor to the electrical grounding system
5. Check all connections for tightness and security

Reliable, cost-effective, and built to last, the Galvanized Ground Rod is a trusted solution for proper grounding and electrical safety. A solid foundation for protecting systems, equipment, and people because safe power always starts from the ground up.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

06/04/2026

GROUND ROD (COPPER)

A copper ground rod is a solid metal rod made of copper or copper-clad steel that is driven into the ground to provide a safe path for electrical current to dissipate into the earth. It helps protect people and equipment from electrical shock, lightning, and power surges. Copper ground rods are commonly used in electrical grounding systems for homes, commercial buildings, and industrial facilities to ensure proper grounding and electrical safety.

📌How It’s Used:
1. Drive the copper ground rod vertically into the earth
2. Leave an accessible portion above ground if required by code
3. Secure the grounding conductor using an approved ground clamp
4. Connect the conductor to the electrical grounding system
5. Ensure a tight, corrosion-free connection for maximum efficiency
Reliable, durable, and built for safety, the Copper Ground Rod is a must-have for proper grounding and electrical protection. It’s a small component with a big role, keeping systems stable, safe, and compliant for years to come.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

01/04/2026

JUNCTION BOX
A junction box is an enclosure used to safely house and protect electrical wire connections. It helps organize wiring, prevents damage to connections, and reduces the risk of electrical shock or fire. Junction boxes are commonly used in residential, commercial, and industrial electrical installations to connect, branch, or terminate wires, and they allow easy access for maintenance or future changes.

📌How It’s Used:
1. Mount the junction box securely to a wall, ceiling, or structural surface
2. Remove the required knockouts for conduit or cable entry
3. Pull wires into the box and make proper electrical connections
4. Secure all connections neatly inside the box
5. Close with a cover to protect wiring and allow future access

Whether used as a branching point, splice enclosure, or connection hub, the Junction Box is a must-have for clean, safe, and professional electrical work. Simple, reliable, and built to protect, it's the foundation of every well-organized electrical system.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

31/03/2026

UTILITY BOX
A utility box is an electrical box used to house and protect wiring connections, switches, or outlets. It helps keep electrical components secure while preventing contact with exposed wires. Utility boxes are commonly used in residential, commercial, and light industrial installations to mount electrical devices, manage wire connections, and provide a safe, organized enclosure for electrical systems.

📌How It’s Used:
1. Mount the utility box securely to a wall, ceiling, or structural surface
2. Remove the required knockouts for conduit or cable entry
3. Run and secure wires or conduits into the box
4. Make wire connections or install devices like switches or outlets
5. Close with a proper cover to ensure protection and safety

From simple junction points to device mounting, the Utility Box is a must-have component for professional and DIY electrical installations. Dependable, versatile, and easy to use, it’s the small box that makes a big difference in safe and clean electrical systems.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

30/03/2026

SQUARE BOX
A square box is a type of electrical box with a square shape used to contain and protect electrical wire connections. It provides more space than standard rectangular boxes, making it ideal for multiple wire splices or heavier wiring. Square boxes are commonly used in residential, commercial, and industrial electrical installations to serve as junction points, support lighting fixtures, or connect conduit runs while keeping wiring organized and safe.

📌How It’s Used:
1. Secure the square box to a wall, ceiling, or framing
2. Remove knockouts as needed for conduit or cable entry
3. Install connectors and pull wires into the box
4. Make connections safely with ample working space
5. Attach the cover to protect wiring and complete the installation

The Square Box provides the room, strength, and flexibility needed for safe and professional electrical work. A dependable choice for electricians who value efficiency, safety, and clean results on every job.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

28/03/2026

STRUT CHANNEL NONSLOTTED

A strut channel non-slotted is a solid metal framing channel without slots or holes, designed for strong and rigid support. It provides a smooth, continuous surface that offers higher load capacity and added strength compared to slotted channels. Non-slotted strut channels are commonly used in electrical, plumbing, HVAC, and structural applications to support heavy conduit, pipes, equipment, and framing systems where maximum strength and stability are required.

📌How It’s Used:
1. Measure and cut the channel to the required length.
2. Secure it to walls, ceilings, or structural surfaces using anchors or bolts.
3. Attach pipes, conduits, cable trays, or equipment using Unistrut fittings.
4. Align components accurately for a clean installation.
5. Tighten all hardware to ensure stability and safety.

A non-slotted Unistrut channel delivers dependable strength with a sleek, finished look. Ideal for contractors and installers who prioritize durability, precision, and professional results in every project, it’s a trusted framing solution built to perform.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

27/03/2026

UNISTRUT CHANNEL SLOTTED
A strut channel slotted is a metal framing channel with evenly spaced slots along its length, designed to support and mount electrical, mechanical, and structural components. The slots allow for easy adjustment, fastening, and alignment using bolts, nuts, or clamps without drilling. Slotted strut channels are commonly used in construction, electrical, plumbing, and HVAC applications to support conduit, pipes, cable trays, and equipment frames in a strong, flexible, and organized way.

📌How It’s Used:
1. Measure and cut the channel to the required length.
2. Secure it to walls, ceilings, or structures using anchors or bolts.
3. Attach conduits, pipes, cable trays, or equipment using Unistrut clamps or fittings.
4. Adjust components easily using the slotted openings.
5. Tighten all hardware for a secure and stable installation.

A slotted Unistrut channel delivers strength, flexibility, and a clean professional finish in one solution. Whether for light or heavy-duty applications, it’s a trusted choice for contractors and installers who want reliable support and efficient installation every time.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

26/03/2026

ANCHORBOLT
An anchor bolt is a metal fastener used to secure structures, equipment, or supports to concrete or masonry surfaces. It provides a strong and stable connection by anchoring firmly into the concrete. Anchor bolts are commonly used in construction and electrical installations to mount strut channels, equipment, panels, and support frames, ensuring they remain securely in place.

📌How to Use an Anchor Bolt:
1. Drill a hole into the concrete or mounting surface to the required depth.
2. Insert the anchor bolt into the hole.
3. Tighten the bolt to expand and lock it firmly in place.
4. Attach the fixture or bracket over the bolt.
5. Secure with a nut or fastener and check stability.

Using an anchor bolt ensures strong, long-lasting connections where stability matters most. Built for durability and reliable performance, it’s a trusted choice for contractors and installers who demand safety, strength, and professional results in every project.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

25/03/2026

EMT TO FLEX CONNECTOR
An EMT to flex connector is a metal fitting used to connect Electrical Metallic Tubing (EMT) to flexible conduit. It provides a secure and reliable transition between rigid EMT conduit and flexible conduit, allowing electrical wiring to remain protected while accommodating movement or vibration. EMT to flex connectors are commonly used in electrical installations for connecting conduit to motors, equipment, lighting fixtures, and control panels where flexibility is required at the end of a rigid conduit run.

📌How to Use an EMT to Flex Connector:
1. Insert the EMT conduit into the EMT side of the connector.
2. Tighten the set screw to secure the EMT in place.
3. Slide the flexible conduit onto the flex side of the connector.
4. Tighten the clamp or compression screw to hold the flex securely.
5. Ensure all connections are tight before pulling or terminating wires.

Using an EMT to flex connector makes installations more versatile without sacrificing safety or reliability. Built for durability and UL listed for safety, it’s a trusted solution for electricians and contractors who need strong, flexible, and professional-grade conduit connections.

📌For more information, send us a message or thru:
Email: [email protected]
Viber: 09175135222
Telephone: (02) 8288-9648 & (02) 8288-8652

Address

Gov. Pascual Avenue
Malabon
1470

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm
Saturday	9am - 5pm

Telephone

+63282888652

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Alfra Steel Ind. Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Alfra Steel Ind. Inc.:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Equipment Service in Malabon?