JBC Innotech Corporation

16/04/2023

Wall Panels are permanent formworks made up of 2 cellulose fiber cement board attached by EPS Studs.

4x8 ft or 1.22x2.44 plywood size equivalent to 36 Hollow Blocks.

The system is CIP or Cast-In-Place (Class A, B for load bearing walls and Class C for Architectural Walls)

This will give you a smooth finish and faster turn around time.

Thickness are:

2" Wall Panel for bathroom partitions, partitions and specially fences.
3" Wall Panel are for partitions and fences
4" Wall Panel is the standard architectural wall
5"-6" Wall Panel are also for architectural walls may it be load bearing or non-load bearing walls.

24/03/2021

Mass Housing Project in San Antonio, Quezon.

The unique nature of socialized housing project is that it requires effective project management approach. Nevertheless, with the numerous advantages of JBC Wall Panel, it mitigates the risk of inefficiency in construction delivery. Our JBC Wall Panel provides the quality and fast installation to hasten housing projects to individuals and families who need it while still affording them the dignity of eco-friendly designed and distinctive homes.

Mass Housing Project using our Wall Panel System. 72 Units installed in 45 days!

▪︎ Interior & Exterior Wall
▪︎ Smooth Finish
▪︎ Durable (1500-3500psi)
▪︎ Competive price vs. CHB
▪︎ Faster turn around time
▪︎ Fire Resistant

28/07/2020

Mid-rise Commercial Building

The use of "JBC Wall Panel" is one of the most fire-resistive building materials available. Mid-rise buildings with installed interior JBC wall panel technology typically qualify for reduced fire insurance rates. Should a fire occur, walls and partitions effectively divide the structure into compartments, separating areas and limiting fire damage to specific compartments.

28/07/2020

2 Storey Residential House

In this difficult time, construction matters more than ever. Some construction projects faced disrupted supply chains of materials and operational restrictions. However, "JBC Wall Panels" delivers quick turn around projects building it in just a few days in view of the fact that our wall panels has fast advantages over the traditional concrete hollow blocks and precast technologies.

06/02/2020

Wall Panels are permanent formworks made up of 2 cellulose fiber cement board attached by EPS Studs.

4x8 ft or 1.22x2.44 plywood size equivalent to 36 Hollow Blocks.

The system is CIP or Cast-In-Place (Class A, B for load bearing walls and Class C for Architectural Walls)

This will give you a smooth finish and faster turn around time.

Thickness are:

2" Wall Panel for bathroom partitions, partitions and specially fences.
3" Wall Panel are for partitions and fences
4" Wall Panel is the standard architectural wall
5"-6" Wall Panel are also for architectural walls may it be load bearing or non-load bearing walls.

Thanks!

02/11/2019

Soon to rise in Zamboanga, JBC Innotech Corporation ZC

JBC Innotech Corporation continues its
dealership and fabrication of Wall Panels in Zamboanga. The upcoming branch will soon open its doors to the public to offer its products under the partnership and marketing of Vitug Engineering. JBC Innotech Corporation, believes in the importance of leveraging its technology and application in Mindanao.

01/10/2019

Awarding of AITECH certificate

In support of the National Housing Program, JBC Innotech Corporation and Graditel Construction Corporation, engaged in the opportunity for public-private collaboration for socialized housing delivery through the use of "JBC Wall Panel", a system accredited and innovative technology (AITECH) for housing projects with the end view of helping reduce over-all housing costs.

In photo (from left): Engr. Jovita Panopio (NHA-Housing and Technology Development Office Division Manager), Steve Cristobal (President and CEO of GCC), Atty. Angelito Aquila (Head of HUDCC Legislation and Development),
Jared Spencer Cabrera (VP Operations of JBCIC), HLURB official.

23/04/2019

The vertical structural system of a building consists of columns, beams and bracing, and functions to transfer seismic forces to the ground. Engineers have several options when building the vertical structure. They often build walls using braced frames, which rely on trusses to resist sideways motion. Cross-bracing, which uses two diagonal members in an X-shape, is a popular way to build wall trusses. Instead of braced frames or in addition to them, engineers may use shear walls or wall panels -- vertical walls that stiffen the structural frame of a building and help resist rocking forces.

01/04/2019

Almanza Condominium Las Pinas

A 17-storey project of the late Engr. Invr. Jun Cabrera. the inventor and structural engineer of Wall Panels --a technology resistive to fire and seismic events. This provides monolithic strength intended to prevent the infiltration of weather elements on mid-rise projects.

25/03/2019