Sticky Autoworx

Sticky Autoworx Sticky Autoworx — Custom fabrication, performance mods & full builds done right. Steel, stainless, aluminum, titanium, we craft precision, power & perfection.

Built by hand for drivers who demand more. Taupō, NZ. 🔧🔥

26/05/2026

Fresh stock just landed on the website 👊

We’ve been busy adding a heap of new products including mild steel & stainless steel turbo downpipe flanges, turbine flanges, and manifold flanges 🔥

Built for fabricators, tuners, and anyone who’s sick of wasting time with poor fitting parts. More options, more sizes, and more products being added regularly.

Check out the latest additions 👇

stickyautoworx.co.nz⁠

Built tough, built right – The Sticky way 👊

LVVTA CERTIFICATION DAY IS BACK 👊Got a project that needs certifying?We’ve locked in another LVVTA Certification Day at ...
13/05/2026

LVVTA CERTIFICATION DAY IS BACK 👊

Got a project that needs certifying?

We’ve locked in another LVVTA Certification Day at Sticky Autoworx on Friday 29th May.

Whether it’s suspension, chassis mods, engine conversions, airbags, brake upgrades, steering mods or a full custom build — now’s the time to get your ride legal and back on the road.

✔ Avoid costly fines & rego issues
✔ Increase safety & peace of mind
✔ Add value to your build
✔ Support Kiwi car culture

Spots are limited and these days fill up fast.

📍 Sticky Autoworx
28 Manuka Street, Taupo

📞 Message us now to book your cert inspection.

Built tough, built right – The Sticky way 👊

08/05/2026

Making solid progress on Johan’s C10 🔥

Rear chassis notch is done, all the bracing has been completed, and the 4-link setup along with all bracketry is now finished off. Engine is sitting where it should be with mounts completed and ready to go.

Next move is pulling the cab off Monday to finish the chassis work underneath before it heads away for paint.

This build is starting to look seriously tough 👊
Built tough, built right — The Sticky way.

04/05/2026

Luca and I putting our Wastegate Starter Tubes on display today — teaching him young and keeping it in the family.

These aren’t just another piece on the shelf… they’re designed to make your life easier in the workshop.

✔️ Pre-formed bend
✔️ Scalloped to suit your main pipe
✔️ Saves time on fab
✔️ Cuts down extra bends
✔️ Less welding = less cost

Whether you’re running a wastegate, doing a cut-out, or building a 2-into-1 — these take the guesswork out and speed the whole job up.
More efficiency. Better results. Less mucking around.

👉 Available now: stickyautoworx.co.nz





Out with the old, in with the tough stuff 👊We’ve pulled the tired old 10 bolt diff out of this square body C10 and upgra...
23/04/2026

Out with the old, in with the tough stuff 👊

We’ve pulled the tired old 10 bolt diff out of this square body C10 and upgraded it to a much stronger 12 bolt to handle the extra power, kinda like Chevs version of the Ford 9 inch💪

Blasted and stripped down, removing all the old bracketry off and cleaned up ready to go back in ready for what's next.

Next step 👉 building a triangulated 4 link setup and getting the airbags in so this thing lays it's ass on the ground! 😮‍🔥

Stay tuned… this one’s going to be a weapon.

🌐 stickyautoworx.co.nz

Built tough, built right – The Sticky way 👊

Want to work on cool S! every day?Join the team at Sticky Autoworx 👊We’re looking for a skilled, "Jack of all trades"  w...
29/03/2026

Want to work on cool S! every day?

Join the team at Sticky Autoworx 👊

We’re looking for a skilled, "Jack of all trades" who can turn their hand to just about anything and takes real pride in their work.

What you’ll be doing:
• Engine conversions
• Suspension & handling
• Roll cages
• Turbo & supercharger setups
• Chassis mods
• Exhaust fabrication
• ECU & wiring
• MIG & TIG welding

💰 Pay: Negotiable (based on experience)

If you’re keen to work on some of the coolest builds around and be part of a tight crew — we want to hear from you.

📩 Send your CV + photos of your work to:
[email protected]

Built tough, built right – The Sticky way 👊

26/03/2026

New product drop 👊

Get em while our introductory special is on!

Our Wastegate Starter Tubes are designed to take the hassle out of plumbing your wastegate into your exhaust system.

✔️ Scalloped to suit
✔️ Pre-formed bend
✔️ Clean fit-up
✔️ Less time, less mucking around

Perfect for getting your setup started right – whether you're running V-bands, flexis or flanges.
But that’s just the start…

We’ve got a massive range of fabrication parts ready to go, including flanges, bends, merge collectors, reducers, and more — all designed and used in-house right here in the workshop.
Whether you're building at home or in the shop, we’ve got the gear to make it easier 👊

Built tough, built right – The Sticky way 👊

👉 Shop now: stickyautoworx.co.nz
📩 Or flick us a message

Just a few of the cool cars rolling through the shop lately 🔥From classics to cruisers, we’ve had a bit of everything ke...
24/03/2026

Just a few of the cool cars rolling through the shop lately 🔥

From classics to cruisers, we’ve had a bit of everything keeping us busy!

Even managed to sneak the ol’ girl out for a sunny cruise too ☀️

Hope everyone’s having a solid week — stay safe out there 👊 and safe cruising to
!

🔥 WE’RE HIRING – AUTOMOTIVE FABRICATOR 🔥Do you want to work on cool S! every day?Come join the Sticky Autoworx team.We’r...
08/03/2026

🔥 WE’RE HIRING – AUTOMOTIVE FABRICATOR 🔥

Do you want to work on cool S! every day?

Come join the Sticky Autoworx team.
We’re looking for a skilled automotive fabricator who takes pride in their work and enjoys building serious machines.

At Sticky Autoworx we don’t just build exhausts, we do it all!

If you’re passionate about your work and want to work on some of the coolest vehicles around, we want to hear from you.

📩 Send your CV + photos of your work to:
[email protected]

Built tough, built right – The Sticky way.

🔥 CERT DAY – LAST SPOT AVAILABLE! 🔥We’re running another Certification Day on Friday 6th March — and we’ve got ONE spot ...
24/02/2026

🔥 CERT DAY – LAST SPOT AVAILABLE! 🔥

We’re running another Certification Day on Friday 6th March — and we’ve got ONE spot left available!

If you’ve got a project needing certification, now’s the time to lock it in and keep your build moving forward.

✅ Professional cert day
✅ Save time waiting
✅ Get it sorted properly — The Sticky way

📩 Message us now to secure the final booking before it’s gone.

Built tough, built right — The Sticky way.
FabricationLife

Address

28 Manuka Street
Taupo
3378

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm

Telephone

+64275778040

Alerts

Be the first to know and let us send you an email when Sticky Autoworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sticky Autoworx:

Share