Nzxstream

08/11/2025

05/11/2025

Latest design V4.0 now boasts being the most compact forward/reverse with trim control on the market and other features exclusive to NZXSTREAM

https://nzxstream.com/40c-reverse-and-30ctrim-control-unit-single-axis

Now includes:

Over center locking reverse
Push or pull configuration
Adjustable reverse lever angle in 20degree increments (the next batch will be 10degree offset increments)
Zero friction on reverse lever (on 2x Deep Groove Ball Bearings)
Adjustable trim friction via allan key with access through front cover. Using the same set up as previous models with the acetal and natural rubber, large diameter friction disk that HOLDS
Longer or shorter lever action adjustability (Deluxe model only)

05/11/2025

Version 4.0 60/30 now out! 🥳
Redesigned, more refined Single Axis/Stacked 60/30 or 60/40 Reverse & Trim Control Set now available.

https://nzxstream.com/60c-reverse-and-30c-or-40c-trim-control-unit-single-axis

Key Features...
Over center locking reverse
Accepts all 60series cables (100mm/4inch travel, 125mm/5inch travel, 150mm/6inch travel)
Push or pull configuration
Choose either 40c or 30c trim control
Adjustable reverse lever angle in 20degree increments (the next batch will be 10degree offset increments)
Zero friction on reverse lever (on 2x Deep Groove Ball Bearings)
Adjustable trim friction via allan key with access through front cover. Using the same set up as previous models with the acetal and natural rubber, large diameter friction disk that HOLDS
Longer or shorter lever action adjustability
This particular controller accepts any 60 series cable (100mm/4inch travel, 125mm/5inch travel, 150mm/6inch travel) in either push or pull configuration, which means it can be used on any jet unit that requires a 60c cable, and either a 30 or 40 series cable for the trim control.

27/10/2025

1x soggy phone and paparazzi

08/06/2025

All available at www.nzxstream.com

Watch a flywheel being manufactured on one of our CNC Mill Turns… tolerances capable of 0.001mm (have fun trying to measure that!) and mirror finishes as always.

We now have Honda J35 flywheels machined for a 1310 drive shaft to bolt straight on, complete with starter motor and adaptor mounts.
P.S the crank pattern is the same as the Honda K24 and J30

Also water jacketed Ali-Art/NZXSTREAM exhaust manifolds to fit Honda J35 & J30 as well as General Motors LFX 3.6ltr V6

And finally a solution for your ‘Universal’ throttle bodies with our LS TPS and adapter kit.

Let us know what you are building, we might be able to help you out and at a fraction of the cost with no compromise in quality…
Passionate about jetboating and making your quality CNC machined components.
Call us on +64 6 8788847
or 027 280 1019

Send a message to learn more

16/11/2024

Latest design Version 3.0 now available... (also added a 40/30 controller to complete the range).
With more features, a lot more compact and a whole heap lighter weight...
Key features for V3.0 include:
*additional adjustment settings for each configuration (means the user can adjust how long or short the lever action is).
*increased offset for dual levers so the reverse lever can cross behind trim lever.
*trim lever moved 20mm closer to reverse lever with more clearance!
*pivoting points added and moved to decrease controller weight and overall size.

Head to www.nzxstream.com for more info.

Shipping:
NZ $20NZD
AU $40AUD
USA $60USD
CA $75CAD

*excludes customs/duty fees if any