Fab Supply & Co

Directions Website

Fab Supply & Co Fab Supply & Co
Welding and Fabrication Suppliers

19/10/2026

Full pe*******on. ZERO distortion. 🔥 See the Everlast RedSabre laser welder in action as we weld a flat panel into the truck—with no warping on this job! 👊

Keen to see what it could do in your workshop? Message Fab Supply & Co or visit www.fabsupply.co.nz

19/10/2026

Hard-to-reach steel? Watch this. 👀⚡

We put the Everlast RedSabre 750 laser cleaner, welder and cutter to work cleaning dirty steel in tight spots that are a real struggle to reach with conventional tools.

Check out the demo and see it in action! 💪

Available from Fab Supply & Co.
👉 www.fabsupply.co.nz

🆕 NEW: the Everlast Cyclone 373DPi Double Pulse MIG, built for productionIt does 370A at 60% duty, with a separate wire ...
19/10/2026

🆕 NEW: the Everlast Cyclone 373DPi Double Pulse MIG, built for production

It does 370A at 60% duty, with a separate wire feeder that has its own HD screen, plus an integrated water cooler, a water-cooled 510 series torch and a heavy-duty trolley. It covers single and double pulse MIG, flux core, DC TIG and stick. It comes as a complete package, ready to work.

Now at Fab Supply & Co for $8,668.19.

🛒 Shop now: https://www.fabsupply.co.nz/products/cyclone-373dpi-double-pulse-mig

18/10/2026

Let the positioner do the turning so you can focus on the weld 🔥

The Omik Welding Positioner keeps your part rotating at a smooth, steady speed — so every bead comes out consistent, start to finish.

It's a game changer for round work like exhaust tube, intercooler piping, flanges and fittings, where trying to roll the part by hand means stopping, starting and breaking your rhythm.

Pair it with an Everlast Typhoon TIG and you've got a setup that'll put down clean, repeatable welds on aluminium, stainless and mild steel.

✅ Smooth, adjustable rotation speed
✅ Pairs perfectly with the Everlast Typhoon range
✅ Backed by a team that uses this gear every day at

Available now from Fab Supply & Co — New Zealand's exclusive Everlast Welders distributor 🇳🇿

16/10/2026

🚜🔥 WE’RE DOWN AT THE ELLESMERE A&P SHOW TODAY! 🔥🤘

We’re set up in Leeston and ready for a big day! 💪

There’s heaps to see and do for the kids, plenty of action around the show, and even a cheeky welder for Dad to check out! 🔥⚡

Bring the family down, have a wander, and come say g’day to the team!

📍 Ellesmere A&P Show – Leeston 📅 Today!

See you there! 👊

🆕 NEW: the Everlast Cyclone 313Pi Pulse MIG, a three-phase workshop machineIt delivers 315A of single and double pulse M...
16/10/2026

🆕 NEW: the Everlast Cyclone 313Pi Pulse MIG, a three-phase workshop machine

It delivers 315A of single and double pulse MIG with synergic PowerSet and a full manual mode. It takes 300mm spools, is spool gun and push-pull ready, and runs gas and gasless flux core with E6010 stick. You get less spatter, cleaner welds and better heat control on aluminium.

Now at Fab Supply & Co for $4,853.42.

🛒 Shop now: https://www.fabsupply.co.nz/products/everlast-cyclone-313pi-mig-welder



---

Tradies, this one's for you 👊Everlast Power i-TIG 200T Contractors Package, built for site work. Leave the machine on th...
16/10/2026

Tradies, this one's for you 👊

Everlast Power i-TIG 200T Contractors Package, built for site work. Leave the machine on the trolley and take the torch to the job.

📏 16m AND 8m torch leads. Get into those hard-to-reach spots: up the scaffold, under the pipework, round the back of the plant room.
🎚️ Adjustable amp control right on the torch. Dial your heat up or down mid-weld without walking back to the machine.
🛒 Site trolley. Roll it off the ute and straight across the site.
⚡ 200A DC TIG for stainless and mild steel, maintenance, shutdowns and pipework.

In the package:
✅ Power i-TIG 200T DC TIG welder
✅ Site trolley
✅ 16m & 8m torches with amp control
✅ 3m & 8m ground leads
✅ Dual argon regulator
✅ Furick 2.4mm 17/18/26 cup kit
✅ Furick 2% lanthanated 2.4mm tungstens (10 pack)

🔥 ON SPECIAL THIS WEEK: was $4,303.90, now $3,443 inc GST. Save 20%!
(Gas bottle not included)

Shop now 👉 https://www.fabsupply.co.nz/products/everlast-power-i-tig-200t-contractor-package

Tradies, this one's for you 👊Stop dragging your welder up ladders and through tight gaps. The Everlast Power i-TIG 200T ...
16/10/2026

Tradies, this one's for you 👊

Stop dragging your welder up ladders and through tight gaps. The Everlast Power i-TIG 200T Contractors Package stays on the trolley while YOU get to the job.

📏 16m AND 8m torch leads. Reach up on the scaffold, under the pipework, round the back of the plant room, wherever the weld is.
🎚️ Adjustable amp control right on the torch. Dial your heat up or down mid-job without walking back to the machine.
🛒 Site trolley. Roll it straight off the ute and across the site.
⚡ 200A DC TIG for stainless and mild steel, maintenance, shutdowns and pipework.

Also in the package: 3m & 8m ground leads, a dual argon regulator, a Furick 17/18/26 cup kit and a 10 pack of 2.4mm rare earth tungstens. Rock up and start welding.

🔥 ON SPECIAL THIS WEEK: was $4,303.90, now $3,443 inc GST. That's 20% off!

(Gas bottle not included.)

Grab yours 👉 https://www.fabsupply.co.nz/products/everlast-power-i-tig-200t-contractor-package

🔥 See you TOMORROW at the Ellesmere A&P Show! 🔥Come and find Fab Supply & Co at Site H15 and check out the Everlast rang...
16/10/2026

🔥 See you TOMORROW at the Ellesmere A&P Show! 🔥

Come and find Fab Supply & Co at Site H15 and check out the Everlast range in person. Show specials:

⚡ RedSabre 1500 Laser – $21,487 (SAVE $1,000)
⚡ Cyclone 373DPi – $7,868.19 (SAVE $800)
⚡ Thunder 255 MTS – $2,866.24 (SAVE $600)
⚡ Cyclone 313Pi – $4,353.42 (SAVE $500)
⚡ Cyclone 212 – $1,947.24 (SAVE $200)
⚡ PowerTIG 185DV – $1,470 (SAVE $100)
Plus more deals on the stand. All prices incl GST. Stock is limited, some models have only 1–2 left, so come see us early!

📍 Site H15 – Ellesmere A&P Showgrounds, Leeston
📅 Saturday 17 October

15/10/2026

Weld it, clean it, cut it — the RedSabre 750 does all three ⚡️

One machine that can tack up a job, strip the rust and paint back ready for welding, and make a cut when you need it. For a lot of workshops, that's three tools' worth of space and cost freed up.

It's the newest member of the RedSabre laser family, and it's been a seriously handy bit of kit in our own workshop at .

We've got laser machines from 550 W right up to 6000 W, so whether you're a small fab shop or doing heavy industrial cleaning, there's one to suit the job.

When you buy a laser from us, you get more than just the machine:
✅ Free hands-on training at our workshop
✅ Full 3-year warranty
✅ Support from a team that uses these machines every day

Keen to see it in person or wondering if it'll handle your job? Flick us a message 👇

Address

Christchurch
8024

Website

Alerts

Be the first to know and let us send you an email when Fab Supply & Co posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category

Nearby equipment services

Other Metal Fabricators in Christchurch

Show All