What are the opening hours?

Monday 09:00 - 17:00 Tuesday 09:00 - 17:00 Wednesday 09:00 - 17:00 Thursday 09:00 - 17:00 Friday 09:00 - 17:00

Obsnap Automation and Testing, No. 29A, Jalan SS15/4C, Subang Jaya (2026)

25/11/2025

Troubleshooting and Circuit Board Verification: Reviving Our Testing Machine 🚀
I’m excited to share insights from a recent technical challenge we faced involving a testing machine. Our team encountered a significant issue: the main panel display of the machine was unable to turn on, halting operations.
Here’s how we tackled the problem and successfully restored functionality! 🛠️

🔍 Identifying the Issue
When the main panel display failed to power up, it raised immediate concerns about the circuit board’s integrity. A non-functional display can disrupt workflows and lead to costly downtime, so prompt action was necessary to diagnose and rectify the situation.

🔧 Troubleshooting the Circuit Board
We initiated a thorough troubleshooting process, which included:

Visual Inspection: We carefully examined the circuit board for any visible signs of damage, such as burnt components, loose connections, or corrosion.

Power Supply Check: Ensuring the power supply was functioning correctly was essential. We verified all connections and measured voltage levels to pinpoint any anomalies.

Component Testing: Using specialized equipment, we tested individual components on the circuit board, including resistors, capacitors, and microcontrollers, to identify any malfunctioning parts.

Signal Tracing: By tracing signals through the circuit, we were able to determine where the breakdown occurred, leading us closer to the root cause of the issue.

🔄 Verification and Resolution
Once we identified the faulty components, we proceeded with the necessary repairs and replacements. After reassembling the circuit board, we conducted comprehensive tests to ensure everything was functioning as expected.

✅ Successful Outcome
I’m happy to report that the main panel display is now fully operational! Our testing machine is back online, ready to deliver accurate results once again. This experience highlights the importance of diligence in technical troubleshooting and the expertise required to verify and repair circuit boards effectively.

If you’re facing similar challenges with your testing equipment or require assistance with circuit board repairs, don’t hesitate to reach out!

📲 Need Assistance? For any service or repair inquiries regarding circuit boards, feel free to contact us on WhatsApp at 012-261 8079. We’re dedicated to keeping your systems running smoothly and efficiently!

hashtag hashtag hashtag hashtag hashtag hashtag

12/11/2025

🎉 Another Successful Repair by Our Team! 🎉

Our service team just completed a successful repair and calibration of a Metal Detector system! 🔧✨

💡 The Issue:
The detector was acting up — sometimes detecting metal when there wasn’t any, and sometimes missing real metal pieces.

🔍 What We Found:
Turns out, the problem wasn’t with the machine itself — it was the product passing through that was interfering with the signal!

🔧 What We Did:
We helped the customer adjust their product settings, recalibrated the system, and tested it thoroughly.

✅ The Result:
Now the metal detector works perfectly — accurate, reliable, and no more false alarms! 🙌

We love seeing our customers’ equipment performing at its best — that’s what we do every day! 💪

📲 Need help with your machine or equipment?
Chat with us on WhatsApp: +60-12-2618079

05/11/2025

🔧 Successful Troubleshooting & Restoration of a Rolling Packing Machine 🔧

We’re proud to share another achievement by our Obsnap Technical Service Team — this time involving the successful diagnosis and repair of a rolling packing machine that intermittently failed to display output when the control button was activated.

🔍 Issue Identification

During our on-site inspection, the machine exhibited intermittent output response upon operator input. Through a detailed system analysis, our engineers traced the issue to a faulty power supply source, which was causing inconsistent signal transmission and unstable operation.

🧠 Inspection & Diagnostic Process

Our team performed a systematic and data-driven evaluation of the electrical and control circuitry. Using precision instruments, each component and wiring path was tested for continuity, voltage stability, and signal integrity.

This comprehensive approach allowed us to pinpoint the exact defective source without unnecessary component replacement — ensuring both accuracy and cost-efficiency.

🔧 Repair & Optimization

To restore full functionality, our technicians:

Replaced the defective power supply with a high-quality, reliable unit.

Conducted functional and performance validation tests under simulated production conditions.

Calibrated the system to ensure stable and consistent output performance.

✅ Result & Impact

The machine is now operating at full efficiency, with responsive controls and consistent output readings. This successful intervention not only restored production flow but also enhanced equipment reliability and minimized potential downtime for our client.

We take great pride in delivering technical excellence — ensuring every piece of equipment we service performs at its optimal level, supporting manufacturing continuity and productivity.

💡 Experiencing Technical Issues?

If your equipment faces similar performance or control challenges, our technical experts are ready to help.

📲 Contact Us Today: WhatsApp +60122618079

Let’s keep your machinery running at peak performance — safely, reliably, and efficiently.

03/11/2025

🚀 Successful Repair of BARCOL Portable Hardness Tester! 🚀

I’m excited to share another achievement from our Obsnap technical service team! 💪

We recently resolved an issue with a BARCOL portable hardness tester that was showing inconsistent readings on the calibration plate — a problem that could have affected measurement accuracy. 📏🔍

🔍 Issue Identified

The dial indicator readings fluctuated during testing, raising concerns about accuracy and reliability.

🔧 Inspection & Diagnosis

After a detailed inspection, our team pinpointed the root cause — wear on the indenter, a critical part responsible for measurement precision.

🔄 Repair & Verification

We replaced the worn indenter and ran multiple verification tests using a calibration plate. The result? Stable, consistent, and accurate readings restored! ✅

It’s always rewarding to see our client’s instruments performing like new again — ensuring reliable data and confidence in every measurement.

At Obsnap Automation, we not only provide professional repair and maintenance services but also supply portable hardness testers from trusted brands such as Barcol Impressor and TIME — helping you maintain top-quality testing standards.

📲 Need Assistance?
If you’re experiencing similar issues or require maintenance support, feel free to contact us on WhatsApp: +06-0194960811.
We’re here to keep your equipment performing at its best! 💼⚙️

14/03/2025

🔥 Boost Your Career with Expert Training! 🔥

Want to upgrade your skills and stay ahead in the industry?
🚀 Join our Fundamental Training of Preventive Maintenance and gain hands-on experience from industry professionals!

✅ Learn from experienced trainers
✅ Hands-on, real-world applications
✅ Get certified & enhance your resume 📜
✅ Limited slots for 30 PAX ONLY !!
✅ Lunch will be provided

📅 Date: 18th April 2025
📍 Location: Shah Alam
💰Special discounts up to RM99!

Don’t miss this opportunity to level up your skills! Secure your spot now!

25/02/2025

🔧 Industrial Oven & Freezer Installation and Testing – Precision in Every Step! 🔧

Our expert technical service team recently unloaded, installed and performed comprehensive testing on an industrial oven and freezer. Ensuring these machines operate at peak efficiency is crucial for industries that rely on precise temperature control for their processes.

🔍 Installation & Testing Process
✔️ Safe Unloading & Positioning – Careful handling to prevent damage and ensure proper placement.
✔️ System Integration & Setup – Connecting power, calibrating settings, and configuring controls.
✔️ Performance Testing – Running temperature stability tests to verify accuracy and reliability.

✅ Fully Operational & Ready for Use
After thorough testing and validation, the industrial oven and freezer are fully functional, meeting all required specifications. This ensures our client can confidently operate, knowing their equipment is optimized for performance and longevity.

If your facility requires installation, servicing, or troubleshooting of precision industrial equipment, our team is ready to assist!

📲 Contact us: 019-496 0811

04/02/2025

🔧 Tensile Testing Machine - Software Issue Troubleshooting 🔧

Our dedicated technical service team was recently called to address a malfunction in a tensile testing machine. The issue was software-related, with the program failing to run due to an error, which affected the machine’s performance.

🔍 Diagnosis & Repair
After careful investigation, our team identified a defective main circuit card that was preventing the system from functioning properly. We replaced the faulty card and thoroughly tested the system to ensure the software ran smoothly.

✅ Restored Functionality
With the new circuit card installed and the system revalidated, the tensile testing machine is now fully operational. The software is running in good condition, ensuring precise and reliable testing results.

If you're experiencing similar issues with your equipment or require professional servicing, don’t hesitate to contact us. We offer expert solutions to keep your machines running at their best!

📲 Contact us: 019-496 0811

21/01/2025

🔧 Troubleshooting a Matsuzawa Rockwell Hardness Tester 🔧

Our technical service team recently worked on a Matsuzawa Rockwell Hardness Tester that was showing inconsistent readings. After conducting a thorough inspection, we found that the issue was related to the mechanical components, affecting the tester’s accuracy.

🔍 Diagnosis & Repair
The team carefully examined the mechanical system, identified the faulty parts, and replaced them with precision. After the repair, the hardness tester was revalidated and tested to ensure accurate readings.

✅ Restored Performance
With the mechanical components now functioning correctly, the Rockwell Hardness Tester is back to delivering precise results.

If your testing equipment needs servicing or repair, feel free to reach out to us for reliable solutions.

📲 Contact us at +06-0194960811 or email for inquiries.

07/01/2025

🔧 Diagnosing and Repairing a Temperature Chamber with Power-On Display Issues 🔧

Our technical service team recently tackled an interesting challenge involving a temperature chamber. The machine was unable to show any display when powered on, making it non-operational and hindering its essential role in precise temperature-controlled testing.

🔍 Initial Observations and Problem Identification
Upon receiving the equipment, the team conducted a detailed inspection. It became evident that the issue stemmed from the electrical system. Despite being powered on, the display remained non-functional, suggesting an underlying fault within the machine's electrical components.

🔧 Inspection and Repair Process
Through methodical troubleshooting, our engineers pinpointed defective components within the electrical circuitry. After identifying the faulty parts, replacements were carefully sourced and installed. The system was then tested to ensure all connections and functions were restored.

✅ Restored Functionality
Following the repair, the temperature chamber powered on correctly, and the display returned to full functionality. Further testing confirmed that the system was ready for use.

🔧 Need Assistance?
If you’re facing issues with your testing equipment, whether electrical or mechanical, our team is ready to help. Reach out to us for reliable maintenance and repair solutions.

📲 Contact us today at +06-0194960811 or via email for inquiries.

13/12/2024

🔧 Successful Troubleshooting & Repair of Automatic Cartooning Machine 🔧

I’m pleased to share a recent success from our technical service team, where we resolved an issue with an automatic cartooning machine struggling to perform its routine tasks effectively.

🔍 Issue Identified: Upon inspecting the machine on-site, we discovered that the machine could not pick up boxes correctly during the feeding process. Additionally, the pushing guide was hitting the compartment, causing operational disruptions.

🔧 Inspection and Diagnosis: Our team quickly got to work, thoroughly inspecting the machine. It was found that the pneumatic system was malfunctioning, which affected the machine’s ability to function properly. Furthermore, we identified the need for alignment adjustments to ensure smooth operation during the feeding process.

🔄 Repair and Adjustment: After diagnosing the pneumatic issue, our skilled technical person made the necessary repairs to the system. We also performed alignment adjustments to ensure that all components were positioned correctly for optimal performance. Following the repairs, we ran multiple tests to ensure the machine was fully operational.

✅ Successful Outcome: We are happy to report that after completing the repairs, the automatic cartooning machine is now fully functional. The box-picking process is smooth, and the pushing guide no longer hits the compartment. The machine is now running efficiently, helping to streamline the packaging process once again.

It's always rewarding to see a machine back in action, delivering reliable performance and contributing to improved production.

🔧 Need Assistance? If you're facing similar issues or need maintenance for your automated systems, feel free to reach out. Our team is ready to help ensure your equipment stays in top working condition.

📲 For inquiries or service requests, contact us via WhatsApp at +06-0194960811.

06/12/2024

🔧 Successful Troubleshooting & Repair of Rockwell Hardness Tester 🔧

I’m excited to share a recent success story from our technical service team! We were faced with an issue on a Rockwell hardness tester that had been malfunctioning during long-term use. The unloading display would freeze or "hang" during product testing, disrupting operations and potentially impacting accuracy.

🔍 Issue Identified: Upon receiving the equipment, our team thoroughly inspected and diagnosed the problem. The primary issue was that during extended testing on products, the unloading display would hang, rendering the tester difficult to use.

🔧 Inspection and Diagnosis: After careful examination, we found that the mechanical alignment inside the Rockwell hardness tester was off, causing improper movement during operation. This misalignment was leading to the failure of the display during the unloading phase.

🔄 Repair and Adjustment: To resolve the issue, our skilled technical person made the necessary mechanical adjustments, realigning the internal components to ensure smooth operation. After recalibrating the system, we ran several tests to confirm that the instrument was performing as expected.

✅ Successful Outcome: I'm happy to report that after completing the repairs, the Rockwell hardness tester is now fully functional. The unloading display no longer hangs, and the tester is back to providing reliable and precise measurements for quality control.

It’s always a great feeling when we’re able to bring precision instruments back to life, ensuring they operate at their best and contribute to accurate testing and results.

🔧 Need Assistance? If you’re experiencing similar issues or need maintenance on your hardness testing equipment, don’t hesitate to reach out. Our team is always ready to support you and ensure your instruments are in top working condition.

📲 For inquiries or service requests, feel free to contact us via WhatsApp at +06-0194960811.

28/11/2024

🚀 Successful Repair of Metal Detector System! 🚀

I'm thrilled to share a recent success from our technical service team in diagnosing and restoring the performance of a Metal Detector! 🔧🔍

🔧 Issue Identified:
The equipment was behaving erratically, detecting metal when no metal was present, but failing to detect when a metal piece passed through.

🔍 Inspection and Diagnosis:
Our team conducted a detailed inspection and found that the real issue wasn't with the machine itself, but with the product passing through the system. The client’s product was interfering with the metal detector's functionality, leading to false readings. After verifying the machine's condition, we confirmed that the metal detector was still in excellent working order.

🔄 Repair and Verification:
We assisted the client in adjusting their product parameters to ensure optimal detection and recalibrated the system for more accurate results. We ran a comprehensive series of tests to verify that the machine now operates seamlessly with the client’s products.

✅ Successful Outcome:
I’m pleased to report that the metal detector is now fully functional, accurately detecting metal without false positives. This ensures reliable and precise results for all applications.

It's always rewarding to see our equipment running at peak performance, helping our clients maintain accuracy and reliability in their processes! 🎯

🔧 Need Assistance?
If you’re experiencing similar issues or need expert assistance with your equipment, our team is here to help. We specialize in diagnosing and servicing a wide range of technical instruments.

📲 For inquiries or service requests, feel free to contact us via WhatsApp at +06-0194960811.

Obsnap Automation and Testing

25/11/2025

12/11/2025

05/11/2025

03/11/2025

14/03/2025

25/02/2025

04/02/2025

21/01/2025

07/01/2025

13/12/2024

06/12/2024

28/11/2024

Address

Opening Hours

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category

Monday	09:00 - 17:00
Tuesday	09:00 - 17:00
Wednesday	09:00 - 17:00
Thursday	09:00 - 17:00
Friday	09:00 - 17:00