VFM Machinery

Call Directions Website

VFM Machinery Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from VFM Machinery, Commercial and industrial equipment supplier, 17B, Jalan Kenari 3, Bandar Puchong Jaya, Puchong.

VFM Machinery Sdn Bhd 201901000694 (1310020-X) ‘Value For Money’, specializes in selling affordable, low-cost laser cutting machines, aiming to provide cost-effective solutions to our clients.

This H-Beam Laser Cutting Machine delivers precise and efficient cutting for H-beams and large steel profiles, helping i...
18/09/2026

This H-Beam Laser Cutting Machine delivers precise and efficient cutting for H-beams and large steel profiles, helping improve fabrication speed with cleaner cuts and consistent performance.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

Every cut matters when speed, accuracy, and consistency are part of the job. With JTLC Plate Laser Cutting Machine, meta...
16/09/2026

Every cut matters when speed, accuracy, and consistency are part of the job. With JTLC Plate Laser Cutting Machine, metal plate processing becomes faster, cleaner, and more efficient.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

The JTLC H Beam Laser Cutting Machine is designed for efficient structural steel fabrication, this laser cutting solutio...
14/09/2026

The JTLC H Beam Laser Cutting Machine is designed for efficient structural steel fabrication, this laser cutting solution helps reduce manual work while delivering clean and consistent cutting results.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

The laser cutting machine controller brings job setup, cutting parameters and machine operation into one interface, givi...
11/09/2026

The laser cutting machine controller brings job setup, cutting parameters and machine operation into one interface, giving operators clearer control over the entire cutting process.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

A 6000 × 2500mm cutting area paired with ±0.03mm/m positioning accuracy, 114m/min maximum positioning speed and 1.2G acc...
09/09/2026

A 6000 × 2500mm cutting area paired with ±0.03mm/m positioning accuracy, 114m/min maximum positioning speed and 1.2G acceleration gives the JTLC6025-12000X the capacity and motion performance needed for large format plate processing.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

Built for large format cutting with bevel capability ⚡-The JTLC-8035XP handles up to 8000 × 3500mm working area, with po...
07/09/2026

Built for large format cutting with bevel capability ⚡
-

The JTLC-8035XP handles up to 8000 × 3500mm working area, with positioning speeds up to 124m/min and ±0.05mm/m positioning accuracy for demanding fabrication work.
-

Drop us a message now to know more.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

From installation and setup to troubleshooting and technical support, our experienced technicians are always ready to pr...
26/08/2026

From installation and setup to troubleshooting and technical support, our experienced technicians are always ready to provide the support you need and keep production moving with confidence.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

Going to deal with H-Beam steel and thick plate?-No worries, we have your back. -From heavy structural steel to thick pl...
24/08/2026

Going to deal with H-Beam steel and thick plate?
-

No worries, we have your back.
-

From heavy structural steel to thick plate processing, our machines are ready to support your production needs and help you tackle bigger, more demanding projects with confidence.
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

Precision is key 🔑-In metal fabrication, every millimeter matters. A precise cut means better fitting, smoother assembly...
18/08/2026

Precision is key 🔑
-
In metal fabrication, every millimeter matters. A precise cut means better fitting, smoother assembly, less rework, and a more consistent final result.
-
That’s why accuracy isn’t just a specification, it’s part of producing better work, every time. ⚙️✨
-

Visit us for more information
🌐 www.vfm.com.my
🌐 www.vfm.com.my
🌐 www.vfm.com.my
-

Address

17B, Jalan Kenari 3, Bandar Puchong Jaya
Puchong
47100

Opening Hours

Monday 08:30 - 17:30
Tuesday 08:30 - 17:30
Wednesday 08:30 - 17:30
Thursday 08:30 - 17:30
Friday 08:30 - 17:30
Saturday 08:30 - 17:30

Telephone

+60162222505

Website

Alerts

Be the first to know and let us send you an email when VFM Machinery posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category