Sin Leong Motor Supplies KL Sdn Bhd

Sin Leong Motor Supplies KL Sdn Bhd Quality Automobile Suspension Wholesaler

APM Standard Coil Springs (Front/Rear) for Perodua Myvi, Kenari, Kelisa, Viva, Kembara, Alza etc) available ! If interes...
10/06/2019

APM Standard Coil Springs (Front/Rear) for Perodua Myvi, Kenari, Kelisa, Viva, Kembara, Alza etc) available !

If interested, feel free to call 03 40412533 oe WhatsApp 012 3301805 for more information

Benefits of Parabolic Springs:1.Parabolic springs contain less number of leaves as compared to traditional multi leaf sp...
28/05/2019

Benefits of Parabolic Springs:

1.Parabolic springs contain less number of leaves as compared to traditional multi leaf spring assembly but can carry equal load.

2.Parabolic springs are better suited for long drives, provide more comfortable ride and control to the driver.

3.Each leaf of parabolic assembly acts as a separate spring.

4.In parabolic spring assembly all leaves are of full length carrying equal load as in conventional multi leaf spring assembly.

5.There is a gap between parabolic leaves, which reduces the friction between the leaves and provides better ride comfort.

6.The weight of parabolic spring assembly is lighter than the traditional leaf spring assembly by 30%, which in turn increasing the pay load of the vehicle.

7.The eye thickness of parabolic springs are larger as compared to conventional multi leaf springs, which reduces the eye failures in the field.

8.Raw material grade used for manufacturing parabolic springs has higher strength as compared to the material grade used for conventional leaf springs.

9.Centre lines are used in parabolic springs assembly to avoid friction, water and mud blockage between the leaves however that is not the case for conventional multi leaf springs assembly.

10.In order to improve fatigue life, parabolic springs are stress shot peened in controlled manner in comparison to multi leaf springs which are shot peened.

11.Henkel coating for better surface protection is done in parabolic springs compared to black oxide coat in traditional leaf springs.

12.Load carrying capacity in case of parabolic springs assembly with addition of one parabolic aux leaf is equivalent to the addition of three leaves of conventional leaf springs.

APM Standard Coil Springs for Proton Saga, Iswara, Waja, Wira, Perdana, Gen-2, Savvy etc. available. If interested, feel...
27/05/2019

APM Standard Coil Springs for Proton Saga, Iswara, Waja, Wira, Perdana, Gen-2, Savvy etc. available.

If interested, feel free to call 03 40412533 or WhatApp 012 3301805 to enquire more !

The parabolic spring is designed for lower internal friction and lowest possible weight and hence has fewer leaves. A pa...
24/05/2019

The parabolic spring is designed for lower internal friction and lowest possible weight and hence has fewer leaves. A parabolic spring is basically a leaf or a set of leaves which are tapered in a parabolic manner rather than a linear. The leaves are partly given a parabolic shape from the centre to the end of the leaf, which gives an equal bending stress level along the parabolic part. This helps to ensure efficient use of the material and minimum weight. The shape of the leaves are designed so that contact between the leaves only exists at the centre and the ends. And since the centre of the leaf spring is fixed to the axle with U-bolts, the only friction comes from the end contacts. Rubber pads are also sometimes used to lower the friction. Similar with multi leaf springs, the strength of the eyes is an important safety factor.

The multi leaf spring design is based on the use of a flat trapezoid geometry, with cut leaves stacked one on top of ano...
24/05/2019

The multi leaf spring design is based on the use of a flat trapezoid geometry, with cut leaves stacked one on top of another. This results in a multi leaf design with different lengths for each leaf. When a multi leaf spring deflects the leaves move relative each other. The contact between the leaves produces a friction between them, which causes a difference in load between compression and decompression. The longest leaf has two eyes for assembling to the trucks. The strength of this leaf and the eyes are crucial and sometimes the second leaf will have safety loops which hook around the main eye as a back up in case of failure. The centre of the spring is normally fixed to the vehicle axle with U-bolts.

**Hari Raya Aidilfitri Special Offer for Limited Time Only **Huge discount on various APM PERFORMAX Sport Coil Springs (...
22/05/2019

**Hari Raya Aidilfitri Special Offer for Limited Time Only **

Huge discount on various APM PERFORMAX Sport Coil Springs (Nissan, Toyota, Honda, Proton, Perodua, Mazda etc.). Offer valid until 6th of June only !! Hurry up and don't miss out this crazy deal ☝🏻

APM Multi Leaf/ Parabolic Springs for various light or heavy trucks. Enquire more by calling 03 40412533 or WhatsApp 012...
21/05/2019

APM Multi Leaf/ Parabolic Springs for various light or heavy trucks.

Enquire more by calling 03 40412533 or WhatsApp 012 3301805

APM PERFORMAX Sport Coil Springs for Nissan X-Trail, Sentra, Latio, Sylphy, Grand Livina, Almera etc. available. If inte...
13/05/2019

APM PERFORMAX Sport Coil Springs for Nissan X-Trail, Sentra, Latio, Sylphy, Grand Livina, Almera etc. available.

If interested, feel free to call 03 40412533 or WhatsApp 012 3301805.

10/05/2019

**Hiring Full Time Distributor Sales Representatives**

Benefits:
- Fixed Monthly Salary
- Add-on commission based on sales performance
- Travel and car maintenance allowance
- Work purpose phone bill reimbursement
- Flexible working hours
- Lucrative incentives for exceptional sales performance

Responsibilities:
- Service existing accounts, taking orders and establish new accounts via consistent visits to existing or potential customers
- Plan, organise and conduct the sales and marketing programs to achieve sales target set in the assigned area
- Establish and maintain good customer relationships to improve sales volume and business growth
- Help obtaining current competitive market information on pricing, products, new products, marketing and sales programs, etc
- Responsible for the sales collection and adhere to credit control
- Prepare, monitor and up-date daily sales report
- Other related duties as assigned

Requirements:
- At least 2 year(s) of working experience (preferably from sales or marketing related field)
- Committed, self-discipline, target oriented and positive working attitude.
- Required language(s): Malay, Mandarin, English
- Required skill(s): Customer Service, Meeting Sales Targets, Proficient Communication Skills
- Possess own transport with valid driving license.
- Willing to travel to outstation on regular basis

If interested or would like to enquire more about the job position, please call 03 40412533 or WhatsApp 012 3301805.

09/05/2019

Is your vehicle having such problems ?
- The vehicle is shaky/bumpy when going over uneven or rough roads
- Unable to carry heavy loads like it used to
- Unable to control vehicle's stability when taking corners or turns
If it is and your coil springs are lower than its original height, it means it's time to have an inspection at your vehicle's suspension system. Your vehicle's coil springs could be worn out and may need immediate replacement 🛠
Look no further because at Sin Leong Motor Supplies KL Sin Bhd, you'll be able to get APM Quality Standard & Performax Sports Coil Springs (conformed to ISO 14001/TS 16949 certification) at the lowest price possible !! 😉
For more details, simply reach out today by calling 03 4041 2533 or WhatsApp 012 3301805
你的汽车有以下的故障吗?
- 当汽车在凹凸不平的路上行驶时严重动摇
- 汽车的载重能力减少了
- 汽车在转弯时很不稳定
若有的话而且发现汽车的螺形弹簧比原装的位置低时, 就代表是时候检验你车的悬挂系统。也许你车的螺形弹簧被磨损了, 需要立刻更换以确保驾驶舒适和安全🛠
不用愁,因为你在新隆有限公司就可以找到合格价钱, APM品质保证(获得ISO 14001/TS 16949国际品质标准书) 的螺形弹簧了哦 !! 😉
若有意着想询问详情, 你可拨打 03 4041 2533 或 WhatsApp 012 3301805

APM Standard Coil Springs (Front/Rear) for Honda Accord, Civic, City etc available.**Extra bulk discounts also available...
08/05/2019

APM Standard Coil Springs (Front/Rear) for Honda Accord, Civic, City etc available.

**Extra bulk discounts also available
For more details, please call 03 4041 2533 or WhatsApp 012 3301805

Address

100 Jalan Ipoh
Kuala Lumpur
50350

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00
Saturday 09:00 - 17:00

Telephone

+60340412533

Alerts

Be the first to know and let us send you an email when Sin Leong Motor Supplies KL Sdn Bhd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sin Leong Motor Supplies KL Sdn Bhd:

Share