Taiyo Electric Ind Co Ltd

04/09/2024

PX-201 TEMPERATURE CONTROLLED SOLDERING IRON

English Subtitles are available.Wide-range iron with temperature adjuster.TEMPERATURE-CONTROLLED SOLDERING IRON PX-201https://en.goot.jp/products/detail/px_2...

17/08/2024

FA-1000 with DENSO COBOTTA (Collaborative Robot)

17/08/2024

SOLDERING SYSTEM
FA-1000 Series
Economical, Soldering System.

https://en.goot.jp/products/detail/fa-1000series

13/08/2024

The GS series sucks up solder easily, without the need for a power supply. But if dust accumulates, sucking capacity drops significantly. (We know, it's obvious, but...)

The GS can be disassembled by twisting the body around the release button

Greasing up the rubber gasket will help even more.

13/08/2024

Desoldering wicks do not like hot and humid places.

The copper wire is oxidized by heat and humidity, reducing its power.

If you want to keep your desoldering wick for a long time, please store it at room temperature, out of direct sunlight, and sealed in a container with silica gel.

13/08/2024

A soldering iron oxidizes if it is left to burn continuously.

When the tip oxidizes, it is difficult to solder. Heat does not transfer to the soldering target.

If the surface oxidizes excessively, as in the image, tip refresher or tip recovery cannot cope.

To prevent oxidation of the tip, take the following two points.

When using a temperature-controlled soldering iron, keep the temperature below 350°C and as low as possible. Especially above 400℃, the tip will oxidize faster.
Coat the tip with solder when returning it to the soldering stand. Plating the tip with solder prevents oxidation and extends its life.
This is true of all soldering tools. Desoldering tools as well.

It is important to prevent all tools from oxidizing. This increases life and efficiency.

13/08/2024

We received a maintenance order for the product in this photo, but found tin oxide deposited at the bottom of the pot.

Impurities floated on the solder surface, and tin compounds precipitated to the bottom.

To remove the precipitates, put solder in and heat it up. Then use a flathead screwdriver or similar tool to scrape the bottom of the pot. Precipitates will float to the surface.

Please be careful not to burn yourself with hot solder splashes.

10/08/2024

The longer you use a tool, the more maintenance it needs.
With just a little care, life and workability can be much improved.
Here we will update usage and care techniques.

10/08/2024

Partners promoting goot products in Japan and overseas help us to improve. They gather market information that helps us to perfect designs to users’ needs. Taiyo’s head office and factory are in Fukuyama City, Hiroshima Prefecture. Our Japanese sales force has offices in Tokyo, Osaka, and Niigata.

10/08/2024

We maintain our high standards through our recruitment of young and innovative engineers. We give them workshops and overseas training. We encourage them to design state-of-the-art products. Our motto is, “Outstanding products from outstanding people.”